HYDRO BOOST BRAKE SYSTEM INSTALL FAQ
Vložit
- čas přidán 22. 09. 2022
- This time on Tech Tuesday Jake Burkey and Trey Rogers of Busted Knuckle Off Road will be going over the install of our Hydro Boost Brake System. This will include why you might want this system to help improve the braking power in your rock bouncer, rock buggy, or trail Jeep. They also cover some FAQ and install Do's and Don'ts. Be sure to hit us up for all of your off road braking needs.
The full hydroboost brake kit is $850 - bustedknuckleoffroad.com/coll...
#HydroBoost #rockbouncer #rockbuggy
I've said it before and I'll say it again but I love these video because all the information they contain. And on a side note that hydro-boost unit looks a lot like the 03 to 07 ford super duty hydro-boost unit and if so that's a great platform stock so I can't imagine how good it is after porting.
You guys always explain everything in a way thats easy to understand and have some kick ass stuff
Must have missed it in the video but what if I don’t have Power Steering? Can I cap that exit hole on the HB or does it need to have a return to the tank? Sorry if that was covered already.
Interesting. I bought a full hydro-boost system from a very reputable company and after watching this video I have some concerns. 1) My system came with the ports facing downward in relation to the master cylinder right out of the box as well as the instructional manual. 2) The system came with a brass "T" fitting, which I was a bit reluctant to use. 3) The return port on my hydroboost unit is not a small port, but appears to have been changed to a fitting larger than yours. I'm in the process of bleeding the system now.
Great video on explains how everything works there should be more videos like this, I do have a question I hope you can help me with, if I want install a second return port in reservoir instead of using a tee do I install the return hose above or below oil line ?
Hi guys what is the part number for the master cylinder? Looking for a master for my 2011 Silverado .
Cool setup! So, how would I figure out bore size and brake fluid volume for my 65 4x4 with a high pinion dual piston caliper Dana 44 in the front and the Dana 60 rear will be disc brake swapped also. thanks!
hello. I am having issues with bubbles and noise. can I set up a call
Can you run this without power steering and plug the port that would go to the steering box?
Do you need a powersteering cooler when adding hydro boost?
HI Guys, Do you need to use a propostional valve with this setup. I have disc front and drum brakes.
How much does it cost for this unit please
....but it's friday!
You match the bore of the master cylinder to the calipers you currently have. This guy has no idea what he is talking about telling you you need to change your calipers. You also have to take into consideration how the leverage on your brake pedal is set up which would most likely need to be changed if the vehicle had manual brakes. Does the kit come with a residual pressure valve option for rear drums? What about a proportioning valve for balancing the brakes?