Oh, by the way, I used H11 for both. Maybe something will blow up later but by pure accident I installed the H11 on high beam then did H11 on low and it works on my 2023 Taco.
I saw you guys installed the fog lights on an SR, did you splice into the headlight or used factory wire harness and changed the stalk in steering wheel?
I have an questions, I have a 2022 Toyota Tacoma SR factory head light, bought at Amazon it’s Fahren Ursprung H11 LED Headlight Bulbs, 14000 Lumens 6500K. And I did follow any instructions on internet said 25 feets walls, four feet’s horizontal. After that many cars all piss off at me keep pull over and when I stop red light and cross another side by red light, this second times two different car’s headlight turn flashlight on me. And sometimes drive two opposite lanes keep flashlight on me too. People think my led light bulbs think it’s high beams. I’m very upset because I don’t want bother them or keep flashlights on me. I don’t get it! What I can to do?
@@karltonposey380 unless the projector is specifically made for LEDs, HID retrofits will give you more light and a better pattern out of a halogen projector. I know from personal experience.
Wicked Video, just took me 5 minutes to do. Thanks for making it, and keeping it concise. 10/10
Video was straight to the point. Thank you!
Oh, by the way, I used H11 for both. Maybe something will blow up later but by pure accident I installed the H11 on high beam then did H11 on low and it works on my 2023 Taco.
Same and everythings ok... crossing my fingerd
Direct to the point,nice,not like the others toooo manyyyy explanation,😂😂😂
Do you have a video of how to do the fog light bulbs?
I saw you guys installed the fog lights on an SR, did you splice into the headlight or used factory wire harness and changed the stalk in steering wheel?
Mine is a 2019, and doesnt look like that, harder to get to it
Thanks man! Great vid
Where do i purchase these set of bulbs??
Anyone tried these? Experience on how long they last?
Looks way better
My 2019 Tacoma Trd off road is not twist plug and play. It is has clip in it. Anyone know what type is it? And how to change to led?
Is there a difference in H9 (high beam) and H11 (low beam)? I get mixed answers, some say they are the same, some say the tabs are different...
No, don’t think so. Ordered some led lights off yotaverse, both didn’t have a difference between them and worked well. They were labeled H9/H10/H11
Do the passengers side why yall never do the hard one
Do HID headlights also fit as along as they're H11/H9?
Yesss
so does this work on a 2022 tacoma sport in Canada?
Are these discontinued?
Why were these discontinued?
Do these work on 2021 Tacoma??
Yes it does, just did my 2021 tacoma, works perfect.
Yeah not sure why Amazon says nothing from the 2020 Tacoma fits the 2021
I went to LED couldn't be happier
Does it fit in 2022 tacoma SR5?
I have an questions, I have a 2022 Toyota Tacoma SR factory head light, bought at Amazon it’s Fahren Ursprung H11 LED Headlight Bulbs, 14000 Lumens 6500K. And I did follow any instructions on internet said 25 feets walls, four feet’s horizontal. After that many cars all piss off at me keep pull over and when I stop red light and cross another side by red light, this second times two different car’s headlight turn flashlight on me. And sometimes drive two opposite lanes keep flashlight on me too. People think my led light bulbs think it’s high beams. I’m very upset because I don’t want bother them or keep flashlights on me. I don’t get it! What I can to do?
What?
If my dumba$$ put connected the power plug the wrong way(+-) how do I remove it?
Is this safe to do? Do you need a resistor for those bulbs?
Id imagine those were resistors built in, but the guy just mentions how the harness is longer.. annoying
Your website says they're discontinued?
Because they suck in projectors
Does this work for a 2020 tayota tacoma sr v6 4x4?? And does it produce a brighter led lighting and not damage harness or the housing??
It won’t unless you get some cheap leds !, most of the high rated ones on Amazon are Great. E
Looks like these are no longer being made
Don't do it, either replace the housing with the TRD pro housing or use HID retrofits for projectors.
Why not ?
@@karltonposey380 unless the projector is specifically made for LEDs, HID retrofits will give you more light and a better pattern out of a halogen projector. I know from personal experience.
@vultite is right on
@vultite ehh not always. With projectors you can replace JUST the bulb.
LED tech has changed. Comments like these about refractory housings and LED bulbs are no longer relevant.
You don't show how to actually disconnect wiring harness
just squeeze the tab, and pop it off.
thank you@@thehairyh2o458
Does this work on a 2021 Tacoma?
no
Yes it does
So some bulbs are labeled to fit both H9/H11 at that point is it ok to install the same bulb?
I was wondering the same thing.... did you ever find an answer? My h9 plug has 3 connector ends and the h11 has 2 connector ends....
Yes it is