I would have to add to this! I didn’t remove the fender flares correctly and the clips aren’t as snugged as they originally were I wish I seen this video first
I'll add another heaping of praise for this video. This was really easy to follow and you've got a great instructional style. You explain a few grouped steps that you're about to do, and things to look out for, then go one by one through the list. This is probably the best car tutorial I've ever watched. I think the only thing that I would've appreciated some more help on would be techniques when re-installing the headlights. I had to attempt a few different weird angles before it finally worked out, and had to be careful not to scratch the lenses in the process. Having a second set of hands to pull the bumper and ensure no scratching was happening was really helpful.
Thanks man I really appreciate the positive feedback!! I tried to make it the way I’d wanna see it and I don’t need all the useless talking and I don’t wanna hear about someone’s day I just wanna get this done haha so that’s my approach!! As for your suggestion I think that would be a great video it’s been a while since of done one so maybe I’ll fire up with that. Thanks again bro I’m glad this was useful that’s what I aimed for 👌🏼
Hey. I took my 17 tacoma to a large toyota dealer for warranty headlight replacement. They broke the fender flares and scratched my bumper as they removed it. Took them 6 hours to screw it up nicely. When they said i broke the flares and put the scratches in i made them review the shop video and made hell. They replaced it all via a body shop. Fast forward a few years i wanted to change my lens to aftermarket. Well I watched your video and i can't believe how easy you made it.... plus i didnt break a thing. Thanks
So easy AFTER you explained it that even a GIIRRRL can do it. I did it to install Marimoto assemblies on my 2017 Tacoma. Thanks a bunch...you took all the mystery out of what could've been stuff possibly breaking. Kudos to your cinematographer...YOU.
Ernestine Muragijimana Hey thanks I’m happy it was useful to you and I appreciate the the positive feedback I love getting good comments and that’s all I do it for!!
Thanks for the video bro. Helped me a ton. When I got to 8:50 I got a bit confused but figured it out. What helped me (when pulling the bumper back from the fender) was to push the bumper-from the inside-toward the side of the car to get the bumper to detach from the fender. Hope that helps folks who might have been confused. Pulling the bumper towards the front of the car didn't help much.
First video that goes over the bumper removal part. That is the one thing sketching me out. Thanks for going about this the right way. Getting ready to do this to my '23 Taco SR this weekend.
You are amazingly detailed and instill confidence to rip off the front end off my truck knowing I was not damaging it. I didn't fixed the light changed the grill to a pro and it all went back together like it never happened THX
I’ve taken my headlights off a few times now, and this video has the best process. That’s a great way to get the black fender flare loose, which was probably the part I struggled the most with before. Thanks a lot for this tip.
Thanks bro! I just installed the new 2020 Oem Headlights on my 2019.. I took my time and just under an hour.. I recommend using a bumper clip remover to remove the blue clip from the panel on to the fender.. Other than that your video saved me a lot of time and money.
Great video. Just finished doing the drivers side one on my 2017 Taco. Without this video it would have taken me a lot longer to do and I probably would have broken a few clips, and probably would have spare screws. Thank you for the video. Accurate and to the point.
Great job! I plan on installing a set of 2020 LED headlights into my ‘19 Tacoma. Your awesome video will help things go smoothly. One suggestion; tape over those headlights to avoid scratches!
Euro Crazy Ya those new style headlights look awesome! Thanks for the feedback bro and yes I agree tape would be smart to avoid scratching the headlights but mine already had some from trees and such so I wasn’t overly concerned about that! If I get those 2020s tape no doubt
Thanks for making this! I’ve got a mangled DRL connector on the drivers side, that will be a ton easier to repair with the headlight bucket removed. Now I know how to do that!
Antonio N. Thanks for the feedback bro! I try to do things that’s to the point without cutting corners or breaking stuff! I’m glad this helped you out....that’s what the goal is
Very well done instructional video friend too bad toyota didnt make it easier to remove headlights rather then having to take off the grill & prying off sides of the bumper I think car makers do this intentionally so people would bring their vehicles to the dealerships.
When everything is back together the bumper near the pinch bracket seems loose on the driver side. Is there anything I did or can do to tighten that up where the plastic meets the metal seam?
When installing aftermarket headlights do you have to adjust them in any way or are they mounted in there at a certain angle that requires no adjustment? TIA
They funnel/ force air through the coolers. Probably not 100% necessary but I’d say more efficient. You’re cooling fans do have a shroud though so I wouldn’t worry about it honestly
@06:05 Did you remove the bumper cover bolts on the bottom? I'm trying to change out the headlight assembly and I am stuck trying to expose the bolt on the side by pulling loose that bumper cover.
Thanks bro I’m liking the change. Never was a fan of the chrome. Im just doing these little things till I get the bucks for some big changes but that tiny pic of your taco looks legit man I love the red on black
Tru Alpha808 you gotta go from the grill area under the headlight reach with one arm and get as close to the bumper and fender joint as possible and just push the bumper from the inside out you can actually feel the pinch bracket at the joint push out as close to that as possible it will feel a little scary but that’s how is designed to work and it will pop loose
I broke the bottom two clips of the fender liner, the clips look a part of the liner and not the clips where you just pull out. My OCD is killing me on it lol. Do you know where I can get a Toyota part # to look at a new one? Thanks
Matt McGarry Ya bro I’d look on OEMPARTWORLD.com they have almost everything with part numbers and the prices aren’t too bad but at least you could get the number and search other sites
JoviTV Alright it’s pretty easy do you have the fender flare loose? Make sure that’s loose and pulled out once you got that done there is a pinch fitting where the bumper meets the fender all you do is reach under the headlight from the grill area to the fender and bumper joint and push from the inside out and it will pop out it’s scary feeling but designed that way so you won’t hurt it if you feel around you can actually feel the bracket holding the two together and to put it back just line the bumper up with the bracket and push it back in hope this helps let me know if this did the trick or hit me up with any more questions
Taco Hands ah that helped pop it right out thanks! Yeah my problem was that black hidden bracket connected to the third 10mm attached to the headlight housing. Took me a bit to figure out where to put my hands. Thanks Taco Hands this was very helpful!
Audel Bedoll sorry for the late response but to answer your question no I do not have a IG I should get one for the truck I’ve been asked a few time now!
Nice video bro. Your process on removing the bumper cover is really clear, especially on removing the fender flares CORRECTLY.
Tom L Thanks bro I appreciate the feedback and I’m glad it was of use! There’s more where that came from!
I would have to add to this! I didn’t remove the fender flares correctly and the clips aren’t as snugged as they originally were I wish I seen this video first
I'll add another heaping of praise for this video. This was really easy to follow and you've got a great instructional style. You explain a few grouped steps that you're about to do, and things to look out for, then go one by one through the list. This is probably the best car tutorial I've ever watched.
I think the only thing that I would've appreciated some more help on would be techniques when re-installing the headlights. I had to attempt a few different weird angles before it finally worked out, and had to be careful not to scratch the lenses in the process. Having a second set of hands to pull the bumper and ensure no scratching was happening was really helpful.
Thanks man I really appreciate the positive feedback!! I tried to make it the way I’d wanna see it and I don’t need all the useless talking and I don’t wanna hear about someone’s day I just wanna get this done haha so that’s my approach!! As for your suggestion I think that would be a great video it’s been a while since of done one so maybe I’ll fire up with that. Thanks again bro I’m glad this was useful that’s what I aimed for 👌🏼
Hey. I took my 17 tacoma to a large toyota dealer for warranty headlight replacement. They broke the fender flares and scratched my bumper as they removed it. Took them 6 hours to screw it up nicely. When they said i broke the flares and put the scratches in i made them review the shop video and made hell. They replaced it all via a body shop. Fast forward a few years i wanted to change my lens to aftermarket. Well I watched your video and i can't believe how easy you made it.... plus i didnt break a thing. Thanks
Greg S Thanks bro I glad this helped you out!! It’s crazy how simple things can be when you know what your doing haha
Perfect instructions. Took me about an hour to change both and no broken tabs!
So easy AFTER you explained it that even a GIIRRRL can do it. I did it to install Marimoto assemblies on my 2017 Tacoma. Thanks a bunch...you took all the mystery out of what could've been stuff possibly breaking. Kudos to your cinematographer...YOU.
Ernestine Muragijimana Hey thanks I’m happy it was useful to you and I appreciate the the positive feedback I love getting good comments and that’s all I do it for!!
Thanks for the video bro. Helped me a ton. When I got to 8:50 I got a bit confused but figured it out. What helped me (when pulling the bumper back from the fender) was to push the bumper-from the inside-toward the side of the car to get the bumper to detach from the fender. Hope that helps folks who might have been confused. Pulling the bumper towards the front of the car didn't help much.
Gotta say out of all the videos I’ve watched you’re by far the most descriptive and that helped immensely. Thank you!
Probably the best "How to remove Tacoma headlights" video I've seen.
Thank you putting this together.
Really helped a lot.
Arizonensis Thanks for the positive feedback! I’m glad you could use it. I try to keep all my videos to the point with nothing but the info useful
@@AshtonRegier,
Definitely shows.
Saved me time and headache.
Thank you again, really.
Arizonensis Awesome man that’s my goal here! subscribe if you haven’t got along way to 1000 haha thanks again bro
This is by far THE BEST video for replacing your headlights. Fantastic job. Cuts to the meat, no wasted steps. Will be sharing this.
I appreciate it bro that’s all I wanted was just to get straight to the point
First video that goes over the bumper removal part. That is the one thing sketching me out. Thanks for going about this the right way. Getting ready to do this to my '23 Taco SR this weekend.
one of the best videos ive seen on installing anything for a vehicle. its very clear and hits the important points
Chase Rogers thanks!! That’s my goal!! I try to film it as I would want to view it!! Without all the life story garbage haha
You are amazingly detailed and instill confidence to rip off the front end off my truck knowing I was not damaging it.
I didn't fixed the light changed the grill to a pro and it all went back together like it never happened
THX
The best detailed explanation I've seen yet...Thank YOU!
Thanks bro
You have no idea how help this was. Ive been trying to find a good step by step vid. Urs is definitely one of the better ones
Boss Driver thanks man I appreciate the good feed back it’s what I aim for
I’ve taken my headlights off a few times now, and this video has the best process. That’s a great way to get the black fender flare loose, which was probably the part I struggled the most with before. Thanks a lot for this tip.
Thanks bro! I just installed the new 2020 Oem Headlights on my 2019.. I took my time and just under an hour.. I recommend using a bumper clip remover to remove the blue clip from the panel on to the fender.. Other than that your video saved me a lot of time and money.
are you selling your old headlights????
Did you put the 2020 oem LEDs?
Yes, the new OEM LEDs..
Great vid! Best one I’ve watched so far about 3rd gen headlight assembly removal
Thanks so much for this headlight video. Perfect step by step instructions. Had to replace passenger side light. Thank you...
Glad it helped you out!!
Great video. Just finished doing the drivers side one on my 2017 Taco. Without this video it would have taken me a lot longer to do and I probably would have broken a few clips, and probably would have spare screws. Thank you for the video. Accurate and to the point.
Wow, more than I thought to replace driver side light that filled with moisture. Thanks
Killer tutorial. I was a little.nervous to take this on. Took right around an hour and everything went back together perfectly 🤌
That’s awesome glad you found it useful
Dude that was such a great video. You covered all the little things that a crazy person like me wants to know before I try this.
Best detailed headlights removal vid thx
Really super helpful. Was able to change out my lights thanks to your video!
Great job! I plan on installing a set of 2020 LED headlights into my ‘19 Tacoma. Your awesome video will help things go smoothly. One suggestion; tape over those headlights to avoid scratches!
Euro Crazy Ya those new style headlights look awesome! Thanks for the feedback bro and yes I agree tape would be smart to avoid scratching the headlights but mine already had some from trees and such so I wasn’t overly concerned about that! If I get those 2020s tape no doubt
I have to agree with everyone else super informative and easy to do what you describe !! Thank you for the knowledge and info pimp !!!
Thank you for making the video. My son and I are replacing the passenger assembly after he broke the mounts on a ladies bumper.
Craig Robinson dang that’s no good well I hope the damages weren’t too bad! I’m glad you found this helpful it’s the least I could do.
Thanks for making this! I’ve got a mangled DRL connector on the drivers side, that will be a ton easier to repair with the headlight bucket removed. Now I know how to do that!
Rob S Cool deal man I’m glad this was helpful!
Excellent video. Good instructions and right to the point.
👌🏼 thanks! Glad it helped!
Great video. Saved my ass when changing headlights
Dude! Nice job on this video.... half the times I don't do something is because I'm afraid to break it.... great description of those clips...
Antonio N. Thanks for the feedback bro! I try to do things that’s to the point without cutting corners or breaking stuff! I’m glad this helped you out....that’s what the goal is
Excellent detailed video! Thank You, Thank You, Thank You!
Nicely done. It really helped out.
Don’t forget to line that hood up! Haha
Very well done instructional video friend too bad toyota didnt make it easier to remove headlights rather then having to take off the grill & prying off sides of the bumper I think car makers do this intentionally so people would bring their vehicles to the dealerships.
Jerome Casper Thanks! Ya I agree...you would think these types of things would be super accessible but that would just make too much sense 😂
It was very detailed step by step disassembly. Thank you! 👏🏻👏🏻
great video man. no fluff, just the right stuff. thanks!
That’s the goal! Glad you liked it.
Very helpful on my 2016
Thanks a bunch for making this video! It really helped me when I was replacing my cracked headlights on my tacoma.
Aoyoma Kenji Thank you for the feedback I’m glad it helped you out
Dude great video on the steps needed I especially like your fender flare method! Subscribed.
When everything is back together the bumper near the pinch bracket seems loose on the driver side. Is there anything I did or can do to tighten that up where the plastic meets the metal seam?
Great video I'm getting g ready to put in aftermarket headlights and this helps so much. Thank you!
Thanks bro I’m glad it helped
Nice. Is there a similar option/upgrade available for the crappy tail lights it has?
love it! just what I didn't know (and will be doing). Cheers
L M Thanks for showing some love glad you found it helpful
Sir, can you recommend where to get replacement from ? The one from Toyota is like $500, that too much, can u recommend go cheaper alternative ? thx
When installing aftermarket headlights do you have to adjust them in any way or are they mounted in there at a certain angle that requires no adjustment? TIA
Very Helpfull vedio thanks 🤟
One the back of the headlight, does amber light that’s a side marker light come out?
Awesome vid
Good stuff bro 👍🤘 out of all the videos urs helped me ou the most thanks
Thanks bro glad it helped you out
Great vid
hell yeah! perfect video. thank you
clg55 Thanks bro! glad you found it useful!
Does anyone have the part # of the 2 10mm bolts that holds the headlight in place ? Thank you
When you’re separating the pinch bracket, do you just push from the inside and pull out towards you?
I mainly just pushed out from the inside not really any pulling you’ll see it’s pretty easy! Seems scary but that’s the way it’s designed to work
What do those shrouds do? I may or may not have forgotten to put them back on after I re-installed the grill
They funnel/ force air through the coolers. Probably not 100% necessary but I’d say more efficient. You’re cooling fans do have a shroud though so I wouldn’t worry about it honestly
NICE! love the blackout headlights on the 3rd gen tacoma's
Chad Boggs Thanks bro I love the blackout also looks way better I’ll have a video of that soon!
Taco Hands I don't know if I have the nerve to do my headlights. but if you make it look easy I might give it a try. thanks for some great videos
The way I went wasn’t easy but knowing what I know now it would be a lot easier I’ll give some pointers in my video or in the comments
Thanks
@06:05 Did you remove the bumper cover bolts on the bottom? I'm trying to change out the headlight assembly and I am stuck trying to expose the bolt on the side by pulling loose that bumper cover.
Looks awesome bro , I’m in the middle of mods with my Tacoma
Thanks bro I’m liking the change. Never was a fan of the chrome. Im just doing these little things till I get the bucks for some big changes but that tiny pic of your taco looks legit man I love the red on black
Great Video! What were you pushing on with your right hand at 8:50?
Damn good video!!!!
Thanks!!
Nice 👍 looks good
Thanks bro it’s budget but looks way better
I got everything off but I cant get to that pinch you were talking about
Tru Alpha808 you gotta go from the grill area under the headlight reach with one arm and get as close to the bumper and fender joint as possible and just push the bumper from the inside out you can actually feel the pinch bracket at the joint push out as close to that as possible it will feel a little scary but that’s how is designed to work and it will pop loose
Thanks really helped!
Awesome that’s what I aimed for
I broke the bottom two clips of the fender liner, the clips look a part of the liner and not the clips where you just pull out. My OCD is killing me on it lol. Do you know where I can get a Toyota part # to look at a new one? Thanks
Matt McGarry Ya bro I’d look on OEMPARTWORLD.com they have almost everything with part numbers and the prices aren’t too bad but at least you could get the number and search other sites
@@AshtonRegier thanks dude, great site
How did you exactly snap separate the front bumper off? I’m stuck on this step lol
JoviTV Alright it’s pretty easy do you have the fender flare loose? Make sure that’s loose and pulled out once you got that done there is a pinch fitting where the bumper meets the fender all you do is reach under the headlight from the grill area to the fender and bumper joint and push from the inside out and it will pop out it’s scary feeling but designed that way so you won’t hurt it if you feel around you can actually feel the bracket holding the two together and to put it back just line the bumper up with the bracket and push it back in hope this helps let me know if this did the trick or hit me up with any more questions
Taco Hands ah that helped pop it right out thanks! Yeah my problem was that black hidden bracket connected to the third 10mm attached to the headlight housing. Took me a bit to figure out where to put my hands. Thanks Taco Hands this was very helpful!
JoviTV That’s great glad you got it figured let me know if you need anything else
Thanks bro
Do you have a IG Great video would like to follow the truck build
Audel Bedoll sorry for the late response but to answer your question no I do not have a IG I should get one for the truck I’ve been asked a few time now!
So much work for a dam headlight 😪
No lie!! They don’t make easy these days!
*YOINK*
Thanks