Top 10 most popular demo workpieces that will amaze you at trade shows
Vložit
- čas přidán 11. 07. 2024
- Which videos caught your interest?
Did the latest trends, ideas, tools you've never seen before, machining methods, etc. catch your interest?
We believe that if we can make products easily, quickly, and with high precision, making products will become even more enjoyable.
We hope to be able to reduce the burden on our customers at the same time as we cut the materials.
10 NTRX-300
Gear skiving process realized by a multitasking machine│One-piece parts
Related video: • 複合加工機で実現するギアスカイビング加工
→The NTRX-300 is a multitasking machine that enables the production of parts that used to be divided into two parts by machining.
Combined machining also realizes combined parts.
9 Super NTMX
Converting irregularly shaped workpieces from bar stock to finished products in a single operation.
Related movie: • 異形ワークをバー材から一気に完成品へ
→The Super NTMX is a complex-shaped part that is difficult to grasp, but if it is machined from a bar material, front-side machining becomes possible.
One machine and one or two processes can complete such a complex shaped part, and it will reduce the burden on the customer.
8 WT-250II
Simultaneous one-chuck machining of various gears
Related video: • 様々なギヤのワンチャック同時加工
→Various gears are machined on the outer circumference and end face of the shaft shape in various ways.
7 NTY³-100
Machining of irregularly shaped workpieces from bar stock
Related movie: • バー材から異形ワークの削り出し加工
→Although it is a small product, it requires a very large number of tools.
The 3-turret Y-axis allows for a wider range of simultaneous upper and lower machining.
6 NTJ-100
Thin workpiece machining/Hexagonal hole machining using B-axis
Related movie: • 薄物ワークの加工/B軸を使った六角穴加工
→Demonstration machining of hexagonal milling on the outer circumference of a ball like a soccer ball.
Demonstration of machining using turret B-axis function.
5 WT-150II
Demonstration of Process Integration on a Multi-Tasking Machine│Contouring Machining
Related movie: • Nakamura-Tome Helical ...
→Demonstration of helical machining that realizes large hole drilling with a small tool, and contouring machining that can process a 65 mm bar material to a finished product all at once.
Processing from bar stock to finished product in one stroke
4 MX-100
Demonstration machining to shave off the customer's burden
Related movie: • 異形ワークでの複合加工
→Demo processing of complex shapes that are difficult to process from cut materials.
3 NTY³-100
Highly efficient drilling using Y-axis|Attractive features of multi-turret multitasking machine
Related video: • Y軸を使った高効率穴明け加工|マルチタレット...
→This is a shape with a high degree of multitasking. All turrets are equipped with milling and Y-axis
and Y-axis on all turrets.
2 NTRX-300
Gear Skiving Machining | Significant Process Integration of Gear Components
Related video: • ギヤスカイビング加工 | 歯車部品の大幅な工程集約
→Please watch the Process Integration of Gear Parts.
The turning process, milling process, and gear cutting process are machined on a single multitasking machine.
The more gear cutting points there are, the greater the effect.
1 NTJ-100
Wind chime|Processing thin workpieces without distortion
Related video: • 風鈴 | 薄物ワークを歪まず加工
→The most popular process was the machining of thin-walled parts with simple shapes.
After finishing the inner diameter, the outer diameter is finished using an umbrella center that matches the taper.
Video Chapters
00:00 Opening
00:19 No.10: NTRX-300
03:34 No.09: Super NTMX
06:35 No.08: WT-250II
09:33 No.07: NTY³-100
12:12 No.06: NTJ-100
15:14 No.05: WT-150II
18:34 No.04: MX-100
22:25 No.03: NTY³-100
26:27 No.02: NTRX-300
31:08 No.01: NTJ-100
Nakamura-Tome Home Page: www.nakamura-tome.co.jp
Nakamura-Tome's LinkedIn
/ nakam
#CNC #macinist #machine #nakamura #nakamuratome #NC lathe - Věda a technologie
You sure do make some wonderful machines. Thankyou for sharing.