Video

Thank you very much for your comment! We are glad to hear that!!

Thank you very much for your comment! This machining uses Aluminum A7075(JIS) material.

Thank you very much for your comment! We're happy to hear that!

Thank you very much for your comment!!!!

Thank you for your comment! Surely that's a compliment in a good sense, right??

Thank you very much for your question! We have included a cleaning process that involves rotating the spindle.

Thank you very much for your question! Since this is a demo, the process of cleaning chips with air before tool change is omitted, but there is no problem with automatic tool change. We also manage torque and can confirm the tightening. When dealing with small chips, it may be difficult to notice them, which is why we measure with an automatic tool setter after the tool change. If the measured value exceeds a certain threshold, the operation will be stopped. We can make proposals tailored to the customer's needs.

Thank you very much for your comment! We're glad to hear that!!!

Thank you very much for your feedback. We will use your comments as a reference for future video production.

コメントありがとうございます。 中村留の機械はどれも剛性にこだわって設計されてますので、嬉しいお言葉です！ 複合加工機なので、1台でさまざまな加工に対応できるのも魅力です。

Thank you very much for your comment! We're really glad to hear that!!! Nakamura-Tome machines are multitasking machines, so although it's a lathe, it can also perform milling operations like a milling machine!

Thank you very much for your comment! We are very pleased to hear that. And thank you for using Nakamura-Tome machines for such a long time. It seems that you have achieved stable operation for a significant amount of time. Your machine management skills are impressive!

Thank you very much for your question! The machining time is approximately 9.4 minutes per groove, and with 7 grooves, it takes about 65 minutes just for the groove machining. If you have any other questions about the machining process, please feel free to contact us through our website. Contact us!>>> www.nakamura-tome.com/contact_product/

Thank you very much for your question! I confirmed with the engineer who created this workpiece, and he said that the gear was programmed using CAM. If you have any other questions about the machining process, please feel free to contact us through our website! Contact us!>>> www.nakamura-tome.com/contact_product/

Thank you very much for your comment. Please consider our machines when you introduce new equipment!!

Thank you for your comment! Unfortunately, we don't sell T-shirts. We sell machine tools.

@@nakamuratome_global Well, I work with 5 WY-100s at my job, machining pretty complex parts, but I have to admit that I cannot afford one myself. The T-shirt would be a cool way of support.

Thank you very much for using several Nakamura-Tome machines. However, we don't currently sell merchandise such as T-shirts. Thank you for your understanding. If you have any issues with complex machining, please contact our distributors in various countries. Additionally, our overseas sales team at the headquarters can answer your questions. Please feel free to contact us anytime through our website. Contact us>>>www.nakamura-tome.com/contact_product/

Thank you for your question. The max. turning diameter is φ325mm for the tool spindle and φ255mm for the lower turret. If you have any questions about machine specifications, please feel free to contact us through our website. Contact us>>>www.nakamura-tome.com/contact_product/

@@nakamuratome_global Thank you for the quick reply. I didn't write my question correctly. Will there be a machine similar to the JX-200 in the future that can handle a diameter of 640 mm?

Thank you for repeated questions many times. Future development plans for new models are undecided, so we can't give a definite answer. Thank you for your understanding. For inquiries about machining large-diameter workpieces, please feel free to contact us anytime through our website. Our overseas sales team or technical team can provide consultations on machine specifications. Contact us about machine specifications>>>www.nakamura-tome.com/contact_product/

Thank you for your comment. I hope you enjoy this video.

Thank you very much for your comment! This is a highly rigid machine that can withstand quite demanding heavy-duty cutting!

Thank you very much for your comment! We are delighted to hear that. Thank you for using our machine!! We highly recommend our new product as well.

Thank you very much for your comment! We are also pleased that you are using our machines. Please be sure to watch our next video!!!

Thank you very much for your comment. We have repeatedly tested this new feature internally to ensure it can be used with box slide machines. It has been designed to minimize damage to the slides.

Thank you very much for your comment. We are planning to conduct tests on Triangle Cut with hard-to-cut materials such as Inconel and Hastelloy in the near future.

same here😯

Thank you for your comment. Actually, it was Shogo Nakamura who was presenting!! There are many other videos where Shogo Nakamura explains new products and functions. If you're interested, please check those out as well.

Thank you very much for your question. The Tip-to-tip time can vary depending on the machine model, tool usage, and storage position of tools, but it's typically between 6.5 to 8.0 seconds. The Tool-to-tool time is about 2.1 seconds. These times may vary depending on the positioning of the machines and tools, so please take them as reference values.

嬉しいコメントありがとうございます！ 他の加工動画もぜひご覧ください！！！

Thank you for your question. This machine model is NTJ-100!!!

Thank you for your comment. Could you kindly inquire through our company's website? Also could you please provide the serial number of the machine you currently use(WY-100II)? Contact us>>>www.nakamura-tome.com/contact_product/

Thank you for your comment! Unfortunately, we currently have no plans to do so. However, we will share your feedback internally.

Thank you for your comment! You're absolutely right. Please feel free to check out other machining videos as well!!

Thank you for your comment! This feature is built into the control panel, so it can be used even without the Internet connection. For more details, please feel free to contact us through our company's website. Contact us>>>www.nakamura-tome.com/contact_product/

Thank you for your comment! Various people and combinations will appear on our CZcams channel!! Please look forward to videos featuring other people as well!!

Thank you for your comment！ Please enjoy this machine, which is designed with a focus on speed.

Thank you for your comment！ Regarding the purchase of the machine, please feel free to contact us through our HP or reach out to your nearest dealer. Contact us>>>www.nakamura-tome.com/contact_product/

This is exactly the kind of specs and review I want to see when I watch a video on a new machine and as for you Mr. Robert... Remember that character attack are always used as last resorts to and already losing argument!

@@briankostrzewski6287 I agree with you 100%

Thank you for watching our video. We value presenting the machines we develop ourselves. We will work to further improve the quality.

Thank you very much！

Thank you for your comment! The NC of Nakamura-Tome machines uses FANUC. Regarding machine operation, there is an instruction manual provided upon purchasing the machine, so please refer to that. If you have any further questions, please feel free to contact your nearest dealer or our sales team. Contact us>>>www.nakamura-tome.com/contact_product/

Thank you for your comment. We hope that our machine cuts the burden of manufacturing.

Thank you for your comment! While this workpiece is in block shape, when machining it with the R-spindle, we are chucking by grasping the rounded protrusion on the workpiece.

@@nakamuratome_global Many thanks for the quick response. If there were no rounded projection. Would it even be possible to clamp the component? That wouldn't be possible with a three-jaw chuck, would it?

Thank you for your many questions! By using the soft jaws, it is possible to chuck even square-shaped components with a 3-jaw chuck. For any questions regarding machining, please feel free to contact us through our Website. Contact us>>>www.nakamura-tome.com/contact_product/

Thank you very much!

Thank you for your comment. We have noted your opinion, and we will take it into consideration for future video production.

Thank you for your comment. The material in this video is AlMg5.

Thank you for your comment! We would be delighted if you enjoyed this video. We would also be pleased if you could take a look at our other machining videos on this CZcams channel.

Thank you for your comment! You're very proficient in Japanese!!!!

Thank you for your comment! Please feel free to contact our overseas sales team or your nearest dealer at any time through our HP with inquiries regarding machine purchases. Contact us>>>www.nakamura-tome.com/contact_product/

Thank you for your comment! That's a very interesting story. Nakamura-Tome machines have high rigidity, so there is little vibration too!

Thank you for your comment! The Spindle is one of the important elements of making machines.

Thank you for your comment. As you predicted, he is a member of the Nakamura family! He inherited Nakamura-Tome from his father, the previous president, and now he is our leader, always guiding us forward.

Thank you very much! We are glad to hear that!!