Drive shaft Machining with Nakamura-Tome WT-250Ⅱ: Two Turrets Multitasking Machine
Vložit
- čas přidán 8. 09. 2024
- Nakamura-Tome Home Page
www.nakamura-t...
Nakamura-Tome LinkedIn
/ nakamuratome
Shogo Nakamura's LinkedIn
/ shogo-nakamura-651a14121
#CNC #macinist #machine #nakamura #nakamuratome #product
Hi, very good video!
My question:
Was the spiral bevel gear created by a machine cycle, or were the tool paths created with a CAM system?
Thank you very much for your question!
I confirmed with the engineer who created this workpiece, and he said that the gear was programmed using CAM. If you have any other questions about the machining process, please feel free to contact us through our website!
Contact us!>>> www.nakamura-tome.com/contact_product/
Good question. And how long does the spiral bevel gear need?
Thank you very much for your question!
The machining time is approximately 9.4 minutes per groove, and with 7 grooves, it takes about 65 minutes just for the groove machining.
If you have any other questions about the machining process, please feel free to contact us through our website.
Contact us!>>> www.nakamura-tome.com/contact_product/