CNC Machine For Large Gear Manufacturing | Most Modern Technology For Large Milling & Turning Center
Vložit
- čas přidán 26. 09. 2022
- CNC Machine For Large Gear Manufacturing | Most Modern Technology For Large Milling & Turning Center
X-Machines Channel
Website: www.xmachines-co.com/
Fanpage: / x-machines-10949018502...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the CZcams Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above. - Věda a technologie
Reminds me of The Falk Corp in Milwaukee Wis. We made the big stuff.
Long gone now. Mirror shadow of itself now.
Cool stuff in video.
Graduated high school 1980 and only seen large machining in videos or books. 3yrs later going to be interviewed for a job at GE. Walked in building and noticed a bull gear for a U.S. carrier. Never thought I would be working on the big stuff but I did. Worked in GE gear plant in Lynn MASS. VTL machined 20ft and bigger bullgears and all horizontal boring mills used slotted steel floors for tables. Mostly U.S. navy reduction gearing for subs, destroyers, and carriers. Nothing was small and because of the constant fighting with the union the building is a vacant lot.
Yeah unions can be pretty bad.... unfortunately some companies are too.
@@dominic6634 I held R 25 CNC horz boring mill classification and was RD classification. I decided to quit because GE didn't care about its American employees that built the company so I resigned. Luckily for me I found a better job and not in the machine industry
我在看這個視頻，過程你們是不是都有所保留？
因為都沒有看到铣齒後，齒輪做熱處理硬化？甚至齒面研磨？
軸心表面也沒有熱處理及研磨？就組裝起來，這樣使用壽命不是大大減短嗎？
我很喜歡看這個頻道，可以看到很多大型物件的加工。謝謝
Amazing large gear manufacturers
Nice machines. Thank you very much for not adding that annoying music. Thumbs up!
Wow, That's a great video. I will always cheer for you in Korea I'm looking forward to a great video. Have a nice day.
Thank you very much!
great job👍
Show 👏👏👏👍
Глаз радуется
Enjoyed your video and Thumbs Up
Glad you enjoyed it
It's amazing manufacturing machine it's very big
Yes, it is
Amazing
Thanks
Good 👍
Thank you! Cheers!
very interesting. i am a hobby machinist, so this means something to me.
Glad to hear that! You have a dream job.
@@X-Machines what about 1:40 what's the tools used there?
So do you earn from that too?
Todo lo q uno se imagina se hace realidad soy tornero y ya quisiera trabajar en una de esas maquinas
from where do you get all this forged cranks
Kinh khủng luôn
Krass!!!🤔
Hallo
I'm very intersting...If possible ,I'd like to work while studying at your factory...
এই গুলি আবিষ্কার করা একান্ত দরকার বাংলাদেশের জন্য জরুরী ভিত্তিতে দরকার ফযোজন।
Łał ale to jest wielkie
👍
Saya ingin mengembangkan inovasi
So what machine made the gears fro the machine that makes the gears?.... hmmmm. Chicken first or egg?
Where are these used
Ships, reactor, etc.
スケールがでかすぎる
Holy moly. Perfection.
Glad you like it!
@@X-Machines Yeah I loved working in machining, engineering and mechanical production industry, unfortunately my health can't keep up with.
Roda gila mau bikin apalah,saya kaga tau tolong dong kasih tau,kalau boleh MR. 😂😂😂😂,Thanks so muchs.
1:21 carousel lathe.
Why doesn't the sound match the visuals in any of your videos?
Ok.
Todo está bien solo que esos son muy pesado y un golpe es fatal y no usan cascos ni lentes
I worke in a company where we make machine and work like those
It's a great job
Wat type of Machines r manufactured !
Reductors for steel company. gear max 7.500 mm.
Ok but what are these giant ass gears for? Hydroelectric plants?
ok
Before the pipeline incident
O....ya...ngerti...kemungkinan membuat roda gila pesawat ulak Alik ruang angkasa,yes,not,trims. 😂😂😂😂
😆😛❤❤❤👋👋👋🌻
Using mental chains over a finished part to lift seems a bit stupid...why wouldn't they use fabric straps?
stolen content
làm công nghiệp nặng tiện sắt này thấy khu vực tây á làm rất nhiều nhưng về máy móc thì chắc chắc ko hiện đại công nghiệp bằng châu âu rồi tây á đa số tiện bằng thủ công nhìn châu âu họ làm hiện đại thật ôk từ vn
400 years of forging experience REALLY ???
2022년 10월 27일 금일 인터넷청과 단감 경매단가 10kg 50개11000원 60개8000원 70개4000 원 인터넷경매단가입니다 단감박스 개당 1500 그리고 패드?그리고 단감방재 약값 ? 대한민국나라 인터넷청과 단감경매 현실 아니던가