MV Agusta Brutale 800 RR - Overview of accessories - CNC Racing, Evotech, Fresco Exhaust and more
Vložit
- čas přidán 9. 11. 2022
- In this video, I give an overview of many the accessories that I have added to my 2022 MV Aguste Brutale 800RR SCS. If you have any questions, please leave them in the comments. If you have any of the accessories, let me know what you think about them.
Here are links to some of the accessories. The Amazon links are affiliate links, so I do get a small commission if you purchase them at no cost to you. Thank you for the support.
Fresco Corse Trio Exhaust: bit.ly/3xX2oP4
Evotech Performance:
Radiator and Oil Cooler Guard Set: bit.ly/3Ek6AvJ
Frame Sliders: bit.ly/3fTqyUA
Fork Sliders: bit.ly/3EkIXTO
Rear Axle Sliders: bit.ly/3tlXf08
CNC Racing Accessories:
Clutch Fluid Reservoir Cap: bit.ly/3tnr4gW
Rear Brake Reservoir Cap: bit.ly/3hzlYLC
Front Brake Reservoir Cap: bit.ly/3WPRN33
Brake Lever Short: bit.ly/3UP82eL
Clutch Lever Short: bit.ly/3A7i82K
Rear Wheel Nuts: bit.ly/3UuexnA
Sprocket flange Nuts M10x1.25: bit.ly/3WUP3RW
Rear Sprocket Flange: bit.ly/3A7tCDr
New Rage Cycle:
Fender Eliminator and Turn Signal Kit: amzn.to/3E1LuRz
Quad Lock Mount and Accessories:
Mount: amzn.to/3th03f3
USB Charger: amzn.to/3TspeWB
Wireless Waterproof Charger: bit.ly/3Eo2cvE
Vibration Dampener: bit.ly/3tivrK7
Amazon Accessories:
Mirrors: amzn.to/3Tn0QFD
Mirror Adapter: amzn.to/3TqCP0G
Mirror Hole Plugs: amzn.to/3A4TDDy
LED Brake Light Bulb: amzn.to/3UH2OSg
Accessory Lights: amzn.to/3O3EzvK
Switch: amzn.to/3DZHYH4
Healtech Brake Light Strobe: bit.ly/3WNllhX
Healtech Servo Delete: bit.ly/3tlRzmF - Auta a dopravní prostředky
Cool man, excellent video and awesome bike. Congrats.
Thank you! It's such a fun bike!
Great review very enjoyable, I have a dragster and superveloce.
Thanks, I still love the Dragster. I was going back and forth between the two, but the spoked wheels deterred me, but now every time I look at a Dragster I want one!
The Brutale 1000RR Nuremberg is the most beautiful bike.
I agree!
Thanks for the video! I’m picking one up tomorrow and already want to do some of these same mods. Love the exhaust and how you added that color pop. Have you thought of doing the clear clutch cover with red or bronze clutch pressure plate?
Glad you enjoyed the video. I would love one of those, but I just can't justify the price.
well done
I suggest upgrading the brake pump to a brembo RCS
Are you using the stock headers? How you polish the pipe on the right side of the bike?
Hi!
I'm interested in seeing the modifications needed to install the NRC fender eliminators.
Planning to get one as well. Thanks!
Unfortunately my bike is stored for the winter so I can't make a video for a few months. If you have IG or FB you can message me on there and I can send you some photos that will help.
Just got the bike. Love it! Did you end up taking out the db killer in the stock exhaust before you changed it out?
I do not recall there being one that can be removed.
I placed an order for one of these in October 2020. Last spring I couldn't take delivery because of an injury. I love what you did with it. What are your feelings on the transparent clutch cover? I like seeing the fluid flow inside and spin like a washing machine...Anyhow great job and thanks for the video!
Where are you located that it took so long to get one? I hope you're okay now to ride. It's such a fun bike, and thank you. I absolutely love the clear clutch cover and if it wasn't so quite expensive I would put one on. I have heard that it gets dirty on the inside, but I have never seen one in person for myself.
Hi I love your bike! May I ask you for your opinion. I am thinking of fixing rear axle spool sliders on my Rivale. But I also wish to put the bike on a left hand side paddock stand like you. My worry is damaging the rear wheel and axle in the event of a crash since I won’t have have any axle sliders. Is that a concern for you? Or is it just a trade off for having killer that look? Thanks in advance for your advice!
I actually purchased the Evotech axle sliders and I like the look of it without them better, but with that said, they were really easy to install/take off. If you had to do it each time you need to put it on the stand, it's not that much of a hassle.
Thank you @MZ Very cool Man. do you still have the brake and lever clutch for sale? Im from Dallas. Im interested to buy it if still available.?
Thanks! Yes, I do still have them.
Looks great!! Looking at the turn signal kit, did you need to use something like resistors or another relay to make these work or is it a straight plug and play? Taking into account the original voltage that is used of 3.2v.
No, the OEM signals are LED so nothing is needed. They are plug and play. I am not sure if I mentioned it in the videon but I mounted them slightly different than they intended.
@@mzgarage , yeah you mentioned you mounted them differently and I will figure out the options to mount them similarly. I have tried other LED turn lights before though didn't achieve a normal blinking frequency using resistors, etc. As these ones work fine for you I will give them a shot.
Love it… where did you get the paddock stand or what make is it ..?
Thanks! It's a Pitbull stand.
Hi thanks for sharing your mods. Just a question regarding the exhaust: is the heel guard mounted on the footpeg support or on the exhaust?
I am interested in case I burn my boot as I will install another exhaust, the QD power gun.
Thx a lot, V from Switzerland
For this exhaust the heel guard is mounted to the foot peg. I think the QD power gun has a much larger shield available, and it looks like that connects to the exhaust itself.
@@mzgarage thx for your quick reply. Are you sure about the shield? I red on their youtube channel that nothing was planned, question of style 😄
You know now that I think about it, I am thinking about the other exhaust that looks like the QD. The guard that I have should serve the same purpose. It's available on any of the sites that sell the Corse Trio Exhaust.
What fuel are you using...13.3:1 compression ratio.. I would have to use 110.. i am so on the fence... just a gorgeous street machine... great video
Thanks! I use 93 in the US which I believe is different in other countries.
would the red levers fit my 2020 Brutale 800RR SCS? And if so, do you still have them?
I am pretty sure they are the same, and I still have them. I can double-check compatibility, it's been a while since I've looked.
I have the same new rage fender eliminator. Are you able to make a video on what you did so that I can do the same to my 2021 brutale? Please make that video of what you did!
Unfortunately, it took a while for me to get around to editing this video and winter is coming soon. There is a storm coming in this week, so I want to get my bike put away before it gets here. Did you have a specific question on where to cut the license plate bracket. You can message me on IG or FB and I can try and help.
@@mzgarage Hey. Just need to know where you cut on the plate bracket, also did you have to do anything to the bike where you mounted it due it not fitting newer models? Sorry, I don't have FB or IG. I'll download it now though as really want to get this mounted as yours looks amazing. Whats your IG?
instagram.com/reel/CiAstuCIH-Q/?igshid=MDJmNzVkMjY=
I think I have the piece I cut off. I can send you a photo so you can see where I cut it. It doesn't have to be exact.
@@mzgarage hi can you share the picture with me as well. I'll message you on instagram
this fender eliminator would definitely not be legal in Europe..too bad because it looks great !
I know! I see all the Euro pics in Facebook groups. Such a shame you have to add those ugly things on.
I thought these had the see through clutch cover?
Clear clutch cover?
@@mzgarage there’s a video from MotoDeal reviewing the 2021 Brutale RR and it has a see through clutch cover where you can visibly see the clutch spinning. Looks badass. Probably a different region variation.
They are available after market. I think the only model that comes with it is one of the RC models.
Congratulations on the videos I am buying the same bike, I would like to get in touch with you on instagram. Nice work continues like this
instagram.com/reel/CiBSxarqbEQ/?igshid=YmMyMTA2M2Y=