$800 CIVIC EBAY TURBO KIT BUILD!!
Vložit
- čas přidán 1. 09. 2019
- SMASH THAT LIKE BUTTON!!!
STICKERS! www.diiviinemedia.com/new-pro...
WERE FINALLY DOING IT! After 8 months of talking about it, were finally doing it. $800 CIVIC EBAY TURBO KIT BUILD! I hope you guys are as excited for this as I am, and look forward to more civic content to come soon! Leave a like/comment/subscribe if you enjoyed and want to see more!
----------------------------------------------------------------------
CAMERA GEAR I USE!
Camera: goo.gl/FW1ez1
Lens: goo.gl/k8kXJC
Camera Stabilizer: goo.gl/NQUxxt
Stabilizer Case: goo.gl/tVKZVp
Monitor: goo.gl/DcuzaF
Microphone: goo.gl/QFo8uQ
Camera Cage: goo.gl/PfmXyS
Camera Backpack: goo.gl/a1EmX8
divine media devine diiviinemedia honda civic turbo kit build $800 ebay turbo kit d series engine d15 d16 - Auta a dopravní prostředky
Ight, civic content I'm back.
Same lol
Yes Brad, yes
To put A/C in to your civic with turbo. You need to use the log turbo manifold.
this
@@LonelyPlatinum ?
@@mannyx21 He means that he agrees
Peep Evan shanks video same motor same turbo kit get ideas what he had to do
Greg thomas thats what i was thinking! :)
Same car, same color
Antoine Ramos to be fair teal green is the most common color for eg coupes I had 3 of them exact color and one was single cam turbo and my god are they fun to drive turboed
To be fair divine had his first 🤷🏻♂️
@@Sherzuh didnt have the idea to ebay turbo it first, i mean that evan kid is a complete joke so im prefer this guy even though ive seen two mins of this video and thats it form him
D15b7 non Vtec
Don’t run more then 6-7 lbs or this will go BOOM. And forget about 450-350-250 hp.
Be happy if you even dyno 180whp. That is if you want to keep it safe. Just get a good ECU and tune and get fuel mods, injectors , pressure regulator and it will work!
BULLI KID what about a 93 Mazda 626 2.0L 4 cylinder 5 speed?.. I just bought the car used.. it has 200000 miles.. but it runs fast stock.. can I put a turbo kit in it?...
Robert Todd you can put a turbo on anything. Question is what ecu, injectors will you run? Is there room in the car for a turbo and piping? Will the clutch hold or need to be replaced. Should you do timing belt and water pump... so many factors and ways to do this properly or half asses.
Yes you can probably do it. But does it make sense.... is the question.
thanks for replying back homie YES I JUST did timing belt 10,000 miles ago and water pump file injectors still thinking what to up grade it with and up graded the spark plugs NGK, NGK PLATUM, ROTOR DISTUBATOR NEW, AND STILL THINKING WHAT FUEL PUMP TO USE.. THE ECU I DONT KNOW what do you think or do you know somewhere I can look up for that issue?.. all clutch set is High torque going to put it in soon.. master cylinder, and sly cylinder are good.. and I am using a K&N air filter as well... next is gonna be the hole egsose piping..... I'm thinking straight pipping it... what's up?...
Robert Todd make sure there are companies that can chip or piggy back the stock ecu so they can adjust the fuel timing so you don’t blow the motor.
Flip the turbo and you wont have to weld the down pipe. you have the cold side on the wrong side
Crazy to see how far you have come mike hope to see you keep growing in 2023 🙏🏼🤙🏼
You bought more of a universal kit!! Can't wait to she's done tho good luck
Love the vids I grew up with my dad having high hp Honda’s and I still love am but I got a sc400 now and I love your soarer gonna do the black interior on my sc and star roof .... keep up the dope vids ur next up
Idk how you keep from not opening the box as soon as you get it. As soon as i get stuff in the mail i open it by the time i get to the door lol
Great video and love to see a turbo on the Civic. It's motivated me to turbo my corolla, sooner.
oh yess, the build that every civic needs. Ebay ChooChoobois!
Iv been watching for a while now never say nothing just like seeing what shenanigans your up to I only wish I could get a turbo kit for my car but they don't make one any more. So I have to make it all myself. I'm getting close to being done. I can't wait to see this done really want to see it run and how it likes the boost. Stay up ride low 👍🙏💯
Good attitude and good vid! 🤙🤙
Love the content bro, keep it up!!
Nice just what the Civic needed Kudos
that strut tower brace is baller af, cant wait to see this done
That dub is fire 🔥
welp my car is pretty much perfect for a turbo. the ac blows warm and the power steering has seen better days. its in excellent condition besides the typical paint peel from that particular year and has had tons of stuff replaced on it.
paid 1200 for it which is a steal imo for the condition it was in and the way it drives
Can't the turbo be bolted up the other way so the downpipe points the correct way?
Jordan Carter the downpipe is pointing out horizontally not downward, so no that would not work. We tried every way off camera and no luck
@@diiviinemedia You need to turn the turbo back around & use this kind of downpipe to keep ac/ ps in 92-00 B&D series Civics & Integras... www.ebay.com/itm/Stainless-Steel-Racing-Turbo-Down-Pipe-For-Honda-Civic-Acura-Integra-B16-B18-D16/183672136494?fits=Model%3AIntegra&hash=item2ac3b6632e:g:nHIAAOSw0XldVeYR
@@diiviinemedia These cast manifolds work better too, both are cheap fixes for this!... www.ebay.com/itm/94-01-Acura-Integra-GS-R-Civic-EG-EK-B16-B18-Cast-T3-Turbo-Manifold-Retain-AC/263813922816?fits=Model%3AIntegra&hash=item3d6c890000:g:qFEAAOSwdVBbSTEn
@@diiviinemedia An intercooler kit like this is also a necessity because the random piping they give you with cheap Ebay kits is totally useless, unless you have like 3 more random piping kits to piece together with it lol... www.amazon.com/Upgr8-Aluminum-Piping-Pre-Weld-Flange/dp/B07T86HM73/ref=asc_df_B07T86HM73/?tag=hyprod-20&linkCode=df0&hvadid=366338088421&hvpos=1o6&hvnetw=g&hvrand=7365339034961968465&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9011303&hvtargid=pla-861592385437&psc=1&tag=&ref=&adgrpid=79954179487&hvpone=&hvptwo=&hvadid=366338088421&hvpos=1o6&hvnetw=g&hvrand=7365339034961968465&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9011303&hvtargid=pla-861592385437
@@diiviinemedia The only reason I know all of this is because I kept the ac/ ps in 98 integra ls using all of these components. The parts are much more scarce than when I did it about 10 years ago but it can still be done. Hope this helps!
I believe you can clock the back section of the turbo so that the flange faces the right direction.
Cast iron manifold is the way to go with the Ebay turbo kit. The EBAY ram horns have never been reliable (in my experience)
The color on that mustang 👌🏻
Amen the civic back hell yeah
You can loosen bolts on the turbo and reposition were the down pipe comes out of
Digging this coupe!!
Feels good when you find another youtuber from your own state.
That thing is soooooo clean broski, love the content im new here btw, could’ve clocked the turbo LOL for the down pipe
Bro, it doesn't get much more fun than a low boost setup on a single slammer. It'd be much better if you did a VTEC head swap on that B7 block, because VTEC really does make a hell of a difference, especially with boost, but I boosted my JDM D15B VTEC in my EJ8 coupe when I got it and even with a stock cam and valvetrain I would rev it to 9k rpm between shifts and on 10 psi with a bone stock block it made 208 whp on an eBay turbo kit and 450cc DSM bluetop injectors tuned on a chipped and socketed P28 ECU and Crome. I had a JDM Del Sol Si single cam trans (basically a USDM Si trans) and an Exedy stage 2 street/strip clutch. It would shame modified WRXs and Mazdaspeed 3s because it was so light. Once you get this car tuned you're going to have alot of fun with it. Seriously though Mike, I would suggest a Z6 head (or entire engine) swap ASAP.
Idk if I skip the part or not, but why can’t you clock the turbo the opposite way.
thought the same
Because then the downpipe would be pointed toward the block. it was welded clocked incorrectly and needs to be turned 45-90 degrees and rewelded to point downward for either side.
Alright even shanks number 2. Calm down with these beasty civic builds
go to a hydraulic hose and fitting place and have the lines made that go ffrom the compressor to condensor
... lol the ac compressor not the turbo .... had to do this for a gsr teg that had a similar setup ... turbo is fine with cold side of compressor in its current position . might have to get a diff downpipe and would also suggest gettting a molded for civic intercooler piping kit .
Civic content reappears
Ight ima stay
Nikki Thuork *(People that hate honda’s)- Ight ima head out*
YES
Ok I wanted a sohc vtec swap done but I guess boost is boost so I will sit back and enjoy. Good rippings dude
Top mount bro
What is your wheel and tire spec on the civic?? I have the same year civic with some 15x8 wheels I forgot what offset but the tires it has on right now are 195/50/15 and I bought some nitto nt01’s because I want the look you have but I’m afraid they’ll rub,so if you can please share some info it would be cool
Not To Mention That You Had To Get Rid Of The A/C 😭💔
He has a baby turbo in his and a different manifold.
@@ammonhansen6459 Oh
What suspension mods u have , when you jacked up the car the wheels didn't move 🤔🤔
I haven't watch the other civic videos yet but what d series do you have?
That Foxbody 🤤
Nice 👍🏾
That foxbody 😍😍😍
Love the soarer but it would be a lot cooler if it was static.
Do you have the link to the front lip? That's one of the better replica ones
What is the name of the song playing when he is wire brushing the bolts
Can you pass the link where u bought the turbo kit? Thanks
I would have send that back, they said it would fit with the air. If my car has air I'm keeping it. If it's hot in the summer you need air.
How are you gonna get the dipstick
Nice build you should do a lexus gs300 build like me im gonna turbo mine soon they got 2jzs stock
I have the same kit the turbo is backward the down pipe has to be on the right side
Fuck I was pumped to see this video come up. Sick content Mike.
Thank you!
Hey man I’ve been following your channel for a while and I never knew that you where in mass lol hopefully some day I can catch you on the street, also this might be a little bit to ask but I was wondering if you could make a video within a video explain how to take the ac compressor and condenser and all the other ac stuff out of a d16 without there being problems with the engine I’ve been wanting to do it but there’s not really an in depth tutorial and I’m unsure lol
Ah... Memories of my first car. Same color too.
Wipe the header with alcohol before you start it or all the fingerprints and everything will be permanently on there forever
Could you flip the headers over and still use your ac
Is the turbski on backwards
What is the wheel and tire setup?
What's your wheel/tire setup
cxracing, rev9, and log manis usually work out.
1320 and plm are good too
That accent is brilliant
This was my first car 22 years ago. Today I'm really hoping to find one in decent shape, but they seem to have gone extinct over here... They look and drive so good...
Yea every civic I see is so beat up lol
Honestly you might just want to go see about getting a custom manifold made that will allow you to keep ac. Or look for one from a reputable company. From what I have heard these cheap Chinese manifolds are pretty known for cracking. Would suck to make your whole setup around that manifold then end up with it needing fixing or replacing.
The civics ive had usually have lots of room in the engine. What size pipe
Should’ve kept the A/C and swap an LS in, torque fun
I don't think he could do that for $800
What's the Orange Ford at the Back?
The turbine housing can be clocked the right way so the downpipe fits.
I had eBay headers on my old civic. 🙄 welded badge fell off & a hole started forming where the pipes met into the down pipe
That manifold doesn't have a wastegate port? Looks like the turbo is supposed to be internally gated by the look of the exhaust side (small hole) so you might need a different manifold for sure
It has a port it’s just on another cast adapter that mounts between the turbo and the manifold, we just didn’t have the hardware for it yet
Ahhh gotcha!
How did you remove a/c? What do you do to let the free on out?
JJM *Fuck the atmosphere Pussy SeNd It DuuUudE!*
What’s with the sp tuning guy?
You think that the kit could support an expensive turbo?
what is the orange car in the back at 6:19?
Nice bro but any content is good content keep it up
Would you ever find this car and bring it back?
It was the car that brought me to your channel when you were preparing the body for the paint
what civic model is that exact?
Yow what's the orange car in the back of the workshop???
if u gotta take the ac out u might as well build the motor i love built d series there so cheap to make good power
I had a green 95 civic dx turned to b18 and swapped to 5spd from years ago experience that dual loop header and that big turbo the header started to crack a lot up top and even wrapped the header. My Intercooler went right in kit from xsturbo.com was about 800 plus mugen sports gsr computer with hondata s300. After 10 psi the down pipe would blow off. Hope this helps and if ya have a email link I can send old pics of it from me owning it from 04-2010. Watching this video from my tv right now.
Even bought a bigger core radiator later with a fan from toggle switch to cool the car off a couple mins before turning it off
Weld a bracket to be a hanger from that header to the frame. Oh I didn't use that bs down pipe it came with had a extra bracket like on that down pipe and had a muffler shop custom make a down pipe and make a spot to weld the 02 sensor
17:05 "Turu tururu, turu tururu" lmao
Bro what part of mass y’all from
What width tire ?
Is this the Kent shop?
it‘s an ej2
what engine is in it?
All these cheap kits end up blowing up like two days after Install I hope this isn't the same way. I'd like to see this civic work well and last I love the color and that its a coupe
Not rlly lol do ur research pls many including myself have ran them for like 6 months with no problem
@@wizardkingasta1835 probably varies on company and price big dog, these kits arnt known for their quality control
How many mileage you have in that car?
Lmao comment section always makes me laugh so many professional mechanics on here. So many know it alls on here that have most likely never installed a turbo . But because they watch CZcams so they know how arm chair mechanics.
After the 5 speed swap, you dint have any poblems to get the inspections stickeR
I've been watching this channel for around two years now and I've just learnt that your name is Mike 😂.
I always wondered what your name was. If you have said Mike in previous videos I haven't picked up on it..
🤔 After the turbo will you then get an alignment? LOL
I like the idubzzz accent.
Hey my friend toll me how can I getter one motor lake that for one honda civic 04
He hit that note at 6:14
Put the D16y8 intake on it there a little bigger then the z6
You should check out Texas Honda channel he turbo his civic and keep ac
he said “tight enough” for the exhaust manifold gaskets as if its not supposed to be to torqued to a spec😂
You should’ve gotten a kit with a log manifold. That’s the only one that keeps a/c
I’ve seen ramhorns fit turbo kits too never seen a top mount tho
you should hook up with the boosted boys to get it right but just a thought :)
💎👌
Don’t forget to clock the turbo
anyone got the link for this kit?
Are you guys from mass
You did not put were you got the turbo kit from