How to Replace ABS Speed Sensor with Harness 99-04 GMC Sierra 2500
Vložit
- čas přidán 25. 08. 2024
- Buy Now!
New ABS Wheel Speed Sensor from 1AAuto.com 1aau.to/ia/1AZW...
1A Auto Shows you how to install, repair, fix, change or replace a bad or broken ABS sensor and harness. This video is applicable to the GMC Sierra and Chevy Silverado and Suburban models, years 99, 00, 01, 02, 03, 04, 05, and 06.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oYk/1AX...
• 18mm Socket 1aau.to/omS/1AX...
• 21mm Socket 1aau.to/omS/1AX...
• 22mm Socket 1aau.to/obs/1AX...
• Adjustable Wrench
• Slip-Joint Pliers
• 1/2 Inch Breaker Bar 1aau.to/ohy/1AX...
• Ratchet 1aau.to/oZC/1AX...
• 8mm Allen Wrench
For More Info visit us at 1aau.to/h/aIm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
We carry a good selection of economy wheel hub bearings that should save you quite a bit of money. Our website is 1aauto.com 888-844-3393 We offer FREE SHIPPING in the lower 48 states on all parts. Hope this helps you out. Have a great day.
I think his videos are exactly what you need; enough detail to get the job done + simple techniques to assist with the assembly and dis-assembly. Also, what you do not see/hear, as you do in so many how to videos, is the mindless chatter. There is so much to like about this video, the time shifting, additional comments, part focus the short callouts with what he is doing while he is doing it, the torque specs.... In short, after watching this video, I am confident I could do this!
If may resolve the issue if the harness is bad. You may want to inspect the harness first to see if it's damaged before ordering the part. We carry new ABS harnesses for your 2003 Chevy Suburban on our website 1aauto.com 888-844-3393
I am getting the anti-lock light on and off. Sometimes the anti-lock brakes engage and vibrate on a hard dry surface when stopping and no light comes on. Sometimes they work just fine. It's a 2004 Chevy Venture Van....Thanks so much for your videos. They help a lot and your new parts service is great as well.....Thanks
Thank you very much for your excellent demonstration on how to install ABS sensor and harness. Your video is and will be very helpful on my installation. I have never saw or seen one installed before. Sincerely, a man in need of expetise in automotive work.
You may want to check all of the steering and suspension components and replace what is worn. You may also want to check the wheel bearings to see if they are okay.
Thank you for stopping by and viewing our auto repair channel on CZcams. If you can give us a little more information about your issue, we can try to help you out.
@doyouliketowatch If you have any warning lights on in the dash, I would pull the code and see what they are pointing too. If you have a bad hub I would replace it first to see if it also resolves the ABS issue. Hope this helps out you out.
Great video! I am going to dig into mine and change it this weekend. I have a 2005 Silverado 2500HD and have been having the same problem with the brakes letting go under 5mph when stopping. The truck pulls to the right when stopping so I figure the left front sensor is bad. again thanks for posting the video.
Steve
I also think its a good idea to clean the rust off of the hub where the sensor goes in. The reason these things stop working properly is because the rust causes the sensor to move away from the reluctor wheel and not get a proper reading.
If you have fixed what the code was pointing to, you might have to clear the code to get it to turn off. You could try that and see what happens.
@nomanali43 You may want to have the code scanned.This should tell you which side may be bad. Hope this helps you out.
It may be similar. One end should plug into the back of the hub and the other end should plug into the harness on the vehicle.
I have heard with the problem with these years are the rest on the hub builds up and slightly moves the sensor away from the gears making the sensor read slightly different at low speeds. I was told I should try to pull the senor and try to remove some of the rust underneath it so that it will read correctly again and if it still doesnt work then replace the sensor
You may have a brake line that has broke somewhere. You may want to take a look at the brake lines. Hope this helps you out. 1aauto.com 888-844-3393
You could try to replace them to see if it helps.
If you have a check engine light on you may want to run the code to see if it points you in a direction.
We carry a new economy hub for your Jimmy that's not a whole lot of money. Here's the Part Number: 1ASHF00007 It's a brand new hub with the sensor. Now if the 4WD isn't working, your 4WD runs on vacuum. Check all of the vacuum lines under the hood to see if there's a leak or a broken line that could cause it not to engage. There's also a 4WD vacuum actuator that tends to go bad on these trucks Part Number: 1AFWA00002 on our website 1aauto.com you may also want to take a look at it.
To access the ABS sensor, you will have to follow the video as shown.
My ABS and Break light. stay on while driving. I believe it is a bad wheel sensor. I keep putting off the repair. Am I causing further damage to the truck by doing this. 2002 GMC 2500HD
@RobKling19 Thank you for visiting our CZcams auto repair channel. Have a great day.
Is a new abs sensor suppose to grind on the teeth? Mine is grinding 😤 shim? Or normal and eventually it grinds to the right size?
I have a 2003 Chevy duramax 2500hd how many abs speed sensors are on the truck?
Did you have a abs light on. How did you know they were faulty
Are there any ABS Speed Sensors on the rear wheels?
Just ordered mine, great price and great video
Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US.
www.1aauto.com/abs-speed-sensor-with-harness/i/1aerk00123?CZcams&CTA%20Comment&ATony
You may want to pull the code if the light is coming on. It should point you in a direction as to which one is acting up. Hope this helps you out. 1aauto.com 888-844-3393
Does it have rear wheel speed sensor
I have a 06 would a bad sensor cause the cruise control to stop working? already replaced brake light switch and multifunction switch and checked fuse
I'm driving a 2003 Chevy 1500 suburban 4x4. When I hit bumps with my front right tire the ABS light comes on and what sounds like the door dinger goes off ("ding, ding, ding"). Code it's throwing is CO223 which I've looked up to be erratic front right wheel speed sensor, is this most likely the part I need to change to fix the problem? Your help is greatly appreciated.
I just replaced the same front sensors on my 2002 chevrolet silverado 2500hd. My abs light is still on. just one question, on one sensor i found a thin tin washer that fits on the sensor probe itself and also a hole for the screw, on the other i found nothing, I am wondering now do you need them as your video didnt mention them?
Do the rear wheels have a speed sensor too? If so is it the same part. I can't seem to find the answer.
What tool size is needed to remove the rear abs sensor on a 03 yukon denali woth awd? I have tried every allen wrench made n havent found one to fit it . Makes no sence.dont need to remove anything but the wheel but the sensor bolt os allen wrench but what size
my truck, 2002 chevy silverado 2500hd, has a vibration in the brake pedal when stopping from 5-0 mph. it sounds like there is a noise coming from the drivers side front wheel the same time there is this vibration. what could this be? thanks
Thank you very helpful
You should repair the vehicle as soon as you're able to.
Thanks for the help
hi greetings from netherlands ,the sounds from my abs is coming from the front how do i know which is the noisyside ?
I have an 06 Sierra 2WD and my ABS would kick in while I was slowing down, almost stopped. I was told to pull the ABS relay and see if it went away, which it did, then I was told that it was a bearing hub going and that the ABS sensor wasn't reading the speed properly. My question is, is it just the sensor, or is the hub?
Excellent! Thanks.
Is the ABS sensor the same as the traction control sensor?
my ABS light was on and now I have to push my brakes all to the floor and it wont stop. im thinking its the sensor but I don't know any suggestions?
my abs light isnt on but my check engine light is i got the code checked out, and it says it lost communication with the anti lock system. code (U0100) you think i might need new sensors?
Same on Blazer 98?
Is it the same process on a 2007 new body style silverado? Really needing to know. Thanks!
It should be pretty close or the same as the ones shown in this video. We carry new ABS brake harnesses for the 2007 Chevy Silverado too. Here's a link to the ones that we carry for a 1500 HD, hope this helps you out. www.1aauto.com/2007-chevy-silverado-1500-hd-abs-wheel-speed-sensor/y-mo-c/2007-2093-133?CZcams&CZcams&ATony
Do you have to bleed brakes
I replaced these sensors in my 2004 GMC sierra 2500hd, and now I have the ABS light and the service Break light and where as before the beeping was intermittent now its constant.
Check the brake fluid level, and also the connections to the harness that you had replaced for corrosion or possible damage. You may also want to pull the code to see what the code's pointing to. 1aauto.com 888-844-3393
Brake fluid is fine and I cleaned the connections before I reconnected so there shouldn't be a problem there. I checked the codes and there are none, so I am at a loss.
i drive a 2000 gmc sierra, when im driving and let go of the gas i feel like my front brakes are slowing me down, when im going down a hill instead of staying the same speed or even speeding up it starts slowing down, any idea on what it could be ?
Thanks for checking us out. There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. +Carlos Vazquez
So wait for a 1999 chevrolet silverado 1500 which part is this? I click your link but it brings me to the parts page of your site.
We currently do not carry an ABS wire with the sensor for that particular year,make model vehicle. 1aauto.com 888-844-3393
HI Jason, If there is a light on see if you can pull a code from the computer as this will more than likely point you in a direction as to what the issue is. Hope this helps you out. 1aauto.com 888-844-3393
my harness connectors do not match. Can I bypass connector and wire direct?
+GbsCorp Probably, if you're able to make a solid connection - but we would recommend getting the correct harness
do you really need to take the rotor off to access the sensor. Also Are there back wheel sensors or just front? I just got my two fronts in the mail from you (Thanks) and hoping there are not sensors in the rear (2001 suburban)
Hi,
First off, thanks for the videos. Several of yours have helped me in the past. I just replaced the ABS sensor on the right front of my 02 chev silverado. Now my ABS light is on and according to the code it says the sensor is missing. I tried unplugging it and plugging it back in but no luck. Any ideas? Thanks!
Was the ABS light on before, and if so is this why the repair was made. You may also want to check the brake fluid level in the reservoir. Also, it may be possible that the other side is bad, if it wasn't replaced.
1A Auto Parts Hi thaks fo rthe quick reply. Brake fluid is good to go. Previously my light was on and the code was specific to the right front. (ABS activating at low speed stops) It is not coding the L/F ABS sensor as bad.
I'm sorry but you needed to be mic'd with a lav mic so you can be heard while the camera is back. I could see no details as you worked close to the wheel and the camera worked FAR from the wheel. I am sure from the comments others are doing better but the video had only limited assistance for me.
Need 1998 Chevy
Is the process much different for a '96?
+Matthew Hinman It may be a similar process. 1aauto.com
could this make my steering wheel shake
Steve Watts If you feel shaking in the steering wheel when you use your brakes, then you might have worn front brakes. Hope this helps you out. 1aauto.com 866-403-3393