How to Replace Front ABS Sensor 2000-2006 Chevrolet Tahoe
Vložit
- čas přidán 27. 07. 2024
- Buy Now!
New ABS Wheel Speed Sensor from 1AAuto.com 1aau.to/ia/ACTRS00001
This video shows you how to install a front ABS sensor on your 2000-2006 Chevrolet Tahoe. ABS wheel speed sensors are critical to the operation of your vehicle's ABS and ESC systems, which use real time wheel speed data to ensure your vehicle stays safe and on the road. These magnetic sensors are sensitive and susceptible to damage, which would require replacing them.
This process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obf8/1AXAA00013
• Pry Bar 1aau.to/oQW/1AXAA00020
• 18mm Socket 1aau.to/oac2/1AXAA00043
• 22mm Socket 1aau.to/onI/1AXAA00266
• Torque Wrench 1aau.to/oazx/1AXAA00044
• Brake Grease
• Copper Anti-Seize
• Gloves 1aau.to/oVH/1AXSS00048
• Safety Glasses 1aau.to/oNU/1AXAA00343
• sanding disc
• 3/16 Allen Wrench 1aau.to/oR/1AXAA00006
• Floor Jack 1aau.to/oZb/1AXAA00068
• Wheel Chocks
• Wire Brush 1aau.to/or6/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks for including torque numbers
Just did this on my 05 escalade after dealing with it for a year. Works great no ABS issues
Is the rear abs sensors on these truck? Or only on the front wheels
Anyone else have sputtering then the abs and traction control come on
Good video quick question are abs sensor only in the front anything in the back with AWD?
I love tht u incorporated the foot pounds for all bolts but u forgot to incorporate the foot pounds for the lugs nuts and reinstalling the tire I'm guessing 140 foot pounds
Liked all videos 😊🙃😍
Thank you so much!!! 🙏🙏🙏
Wow. Dry good job
Excelente 👋
Remember to use blue / medium loctite for the caliper bracket bolts.
I just tried doing that. First difference my caliper are hold by T55 bold. No hexa 18mm. Then when I tried to remove the sensor it broke inside the hub hole. I put it all back together as it's my daily and I can not change or fix the hub on spot.
What is the anti seize you use ? Is it avaialble to private people ?
What grease/lubricant do you use for the sliding pins ?
I'd like ot find a bolt that has a metric head as 3/16" is near 5mm but not quite.
Are you sure that's not a 5 mm Allen socket? Maybe my 3/16 was worn. The 5 mm fit much better. Ty for the guide.
what is inch lbs in ft lbs
Did anyone else have a light and quick ticking noise with a bad wheel speed sensor?