Terrible. 1. Never use a torque wrench to undo tighten bolts. 2. When reinstalling the Quarq spider, you're supposed to tighten those 8 bolts in a star pattern, not a circle pattern as shown in the video. The same goes when tighten bolts on the wheels of your car or the engine head cover.
@@elganadortv8912 a 3/8 ratchet will suffice. If you don't own a ratchet then you should get one. 1/4, 3/8, & 1/2 inch ratchets should be in every mans tool box. As for removing the Sram Red crank, if you're referring to the center bolt, it's an 8mm hex.
Terrible.
1. Never use a torque wrench to undo tighten bolts.
2. When reinstalling the Quarq spider, you're supposed to tighten those 8 bolts in a star pattern, not a circle pattern as shown in the video. The same goes when tighten bolts on the wheels of your car or the engine head cover.
what size of wrench u using to remove crank?
@@elganadortv8912 a 3/8 ratchet will suffice. If you don't own a ratchet then you should get one. 1/4, 3/8, & 1/2 inch ratchets should be in every mans tool box.
As for removing the Sram Red crank, if you're referring to the center bolt, it's an 8mm hex.
The power of handyman 👨🔧
This was agony to watch, everything was what not to do