MIB2 coding for USB media source after CarPlay port retrofit

Sdílet
Vložit
  • čas přidán 9. 07. 2024
  • Coding and adaptation changes in VW #MIB2 Discover Media system after USB port replacement to have both CarPlay functionality as well as #USB source option in MEDIA player.
    ℹ️ The same procedure will work for other MIB2 devices installed in Audi, Seat, Skoda, and Volkswagen cars. Your infotainment system needs to support #CarPlay feature, have proper license key installed, and have correct USB port (connector 5Q0 035 726 E inside assembly 5G0 035 222 E) for the feature to work.
    ➡️ Coding procedure
    Module: 5F → Coding → Long Coding → Byte: 19 → Bit: 6 → enable
    Module: 5F → Coding → Long Coding → Byte: 19 → Bit: 7 → enable
    Module: 5F → Adaptation → Channel: Interface for external media activation - connection 1 → activated
    ➡️ Buy OBDeleven here (ref): mr-fix.info/redirect/obdeleven
    ➡️ More tweaks for your car here: ilovecarmods.com/
    📺 MIB2 USB port replacement: • Replacing MIB2 USB por...
    0:00 MIB2 CarPlay port
    1:11 Coding and adaptation procedure
    2:52 USB source option
    3:14 System reboot
    4:01 Thumb drive with MP3 testing
    ✅ mr-fix.info/​
    ✅ Facebook: / ​
    ✅ Instagram: / ​
    ✅ Pinterest: / ​
  • Auta a dopravní prostředky

Komentáře • 65

  • @mrfixpl
    @mrfixpl  Před 9 měsíci

    Need OBDeleven?
    🎟 Get 10% OFF with code: MRFIX10
    🛒 mr-fix.info/redirect/obdeleven

  • @TheNorville2
    @TheNorville2 Před 2 lety

    Hello, do you know how to enable the maps in the mk 7,5 clocks, all i get are just direction arrows

  • @carbongecko
    @carbongecko Před 2 lety

    Mr. FIX i have a question that hopefully you can help me with. I bought a mmi decoder box for the 2016 mk7 golf s, to get wireless android auto. I installed it using the plug and play cabling and got the Bluetooth to sync with my phone but the wireless portion doesn't work. Would you know 9f I need to code something through either the 5f module or the green setup screen. I have a video showing the error I received on my channel. Any information you can shed a light on would be greatly appreciated.

  • @benjoe177
    @benjoe177 Před rokem

    Hy Mr-Fix,
    I have discover pro unit, android auto works fine with both of the usb plugin. In the media source I see the USB inputs, but when i plugin a pendrive, it always say usb error or something like that. I tried with 16Gb and 64Gb pendrive also, formatted to ntfs, fat32 and exfat also. Neither of them works. What can be the problem? So in short i cannot use pendrive as a media source. Thanks a lot.

  • @luka7273
    @luka7273 Před 10 měsíci

    Hi, and thank you for this video, I wanted to ask for your help if possible. A few months ago, I retrofitted from a Composition Color to an MIB2 Std ZR. I used the MIBToolbox to unlock it, but CarPlay and Android Auto are not functioning. Even after following all the procedures, it shows a USB error. CarPlay and Android Auto used to work with the old radio. I used VCDS to modify the parameters. Thank you for your assistance.

  • @Bz_Footage
    @Bz_Footage Před 11 měsíci

    After open car door the USB port is energized for only for 30S befor turn on the car, how can I put more time? Thanks a lot

  • @gregorwasik2589
    @gregorwasik2589 Před 11 měsíci

    Do Long coding wystarczy podstawowa wersia czy musi byc Pro ? Danke.

  • @Brad0st
    @Brad0st Před 2 lety +1

    Hi, the head unit Discover Pro on my golf mk7 damaged I ordered a used one on eBay, my question is will this OBD can code or reset the unit in order to work on my car?

    • @mrfixpl
      @mrfixpl  Před 2 lety +1

      You can use OBDeleven to copy/paste coding and adaptations from the old unit to the new one. Buy you still need dealer-level tools to remove component protection and to upload valid FEC/SWaP codes to enable all protected features.

  • @thekosabic4750
    @thekosabic4750 Před 2 lety +1

    Hi Mr-Fix, which OBDeleven version I need for this action, the STARTER pack or the PRO pack? thanks in advance, T.Sabic

    • @mrfixpl
      @mrfixpl  Před 2 lety +1

      PRO license is required to access coding and adaptations directly.

  • @giovannibarraco8947
    @giovannibarraco8947 Před 2 měsíci

    It's possible install into polo 6r ?

  • @hcAsicted
    @hcAsicted Před 11 měsíci

    Thanks for this video! It was the thing I was missing after replacing the port and activating carplay!

    • @gregorwasik2589
      @gregorwasik2589 Před 10 měsíci

      Do Long coding wystarczy podstawowa wersia czy musi byc Pro ? Danke.

  • @gregorwasik2589
    @gregorwasik2589 Před 11 měsíci

    Witam. Jakim urzadzeniem codujesz ? Dzieki za wiadomosc.

  • @Dogge_r
    @Dogge_r Před rokem

    I have 14 golf and when I try to safely remove sd card 1 it doesn’t give me the option it skips straight over it how do I fix that

  • @manecosify
    @manecosify Před rokem +1

    Hi.
    Is there any way to make mib2 show the artwork (album cover photo) when streaming on bluethooth? I see that playing from sd card/usb shows the artwork.
    Thanks

    • @mrfixpl
      @mrfixpl  Před rokem

      The limitation is in the phone, as far as I know. Some android phones will stream cover art via BT. iPhones are not doing that.

    • @manecosify
      @manecosify Před rokem

      @@mrfixpl thanks a lot for the fast response. I also tried with a galaxy s9, it doesn’t work. I will try with other android phones also

  • @neilhibbert5201
    @neilhibbert5201 Před 3 lety +3

    Hi I wonder if you can help me.i have just bought mk7 golf r it did not have sat nav in it so .owner got one and had it fitted but no sound comes out of radio or any music from sd card or juke box its mib1 system.can you help.

    • @mrfixpl
      @mrfixpl  Před 3 lety

      Maybe it's configured for external amplifier which your car does not have?
      First of all I would scan for faults with VCDS or OBDeleven or any other diagnostic tool to check what codes are there.

    • @neilhibbert5201
      @neilhibbert5201 Před 3 lety

      Thanks I have obdeleven. I will try and let you know. Many thanks

    • @neilhibbert5201
      @neilhibbert5201 Před 3 lety

      Hi mr fix I have used my obdeleven and its come up with 2 faulty you may be able to help me.1 component protection fault code u110100 fault static. In learning counter 71 ? .is there a way to learn multimedia display unit that's the second fault. Please can you help?

    • @neilhibbert5201
      @neilhibbert5201 Před 3 lety

      Hi is it something that can be recode ???

  • @MrCipam123
    @MrCipam123 Před 2 lety +1

    Hi. I'm wondering if you can help me. My passat b8 ( 2015) has two usb ports, one underneath the display ( usb 1) in similar position as in this video. The second one (usb 2) is in the compartment that is located between two seats. Andorid auto works on both USB ports, but Carplay works only on usb 1. Do you maybe know why this is and is there a way to make carplay work on usb 2. Thanks.

    • @aronlinecoach
      @aronlinecoach Před 2 lety

      I have the same issue on the passat B8 2015, carplay only works on the one in the center console and not under the arm rest. Would appreciate your advice. Do you think changing the settings in obd11 for that port make any difference? Thank you

    • @Evgeny_Trubitsin
      @Evgeny_Trubitsin Před rokem

      Hey there. Most likely tou would need to replace factory USB port with the upgraded one in the armrest box. Chech this video - czcams.com/video/7yTYaxzeXfY/video.html

    • @Evgeny_Trubitsin
      @Evgeny_Trubitsin Před rokem

      @@aronlinecoach Hey there. Most likely tou would need to replace factory USB port with the upgraded one in the armrest box. Chech this video - czcams.com/video/7yTYaxzeXfY/video.html

  • @JPOlivePT
    @JPOlivePT Před rokem +1

    Hi mr-Fix, is it possible to replace the usb port with a 2 usb port to have the VW LTE Usb & Carplay working in the same time?

    • @mrfixpl
      @mrfixpl  Před rokem

      Yes. You need VW USB HUB + two standard ports + wiring + coding.
      The HUB + standard ports are actually cheaper than single CarPlay-enabled port - if we are talking about 2nd hand parts.

    • @freelockuk
      @freelockuk Před rokem

      @@mrfixpl hi Mr-Fix just fitted the hub. i have andriod auto working and carplay but when put usb drive in it (says reading usb2) usb 2 is bold but when i activate it nothing happens..have tried the usb on a pc and the music is there

  • @michaelanthony134
    @michaelanthony134 Před rokem

    Hi my car the usb option greyed out even when i plug in my cable it’s not detected

  • @Al-un2un
    @Al-un2un Před 2 lety +1

    I have a 11 Jetta Sportwagen. Would this radio work with it?

    • @mrfixpl
      @mrfixpl  Před 2 lety

      I believe there's something called "MIB2 VW Discover Media PQ" that you can install in Jetta VI.

  • @tewfik966
    @tewfik966 Před rokem +1

    i confirme thanks

  • @vedranivic4534
    @vedranivic4534 Před rokem +1

    How can I check if the current USB port supports Apple (iPhone) connection? I have CarPlay, Android Auto and MirrorLink activated, and a working USB port. Android Auto works via USB but for CarPlay iPhones do not get recognised. I was getting the "USB device not supported" error when connecting, then I tried the Byte 19 USB iPod + Adaptation fix - now the error does not appear anymore but the iPhone still doesn't get recognised.

  • @sebol02
    @sebol02 Před 3 lety +1

    Hej! Pytanko, te panele na desce to oklejałeś może? Wygląda jak MATRIX BLACK|3M S2080, mam rację?

    • @mrfixpl
      @mrfixpl  Před 3 lety

      Dokładnie tak. Jeszcze nie wszystko gotowe, ale wzór mi się szalenie podoba.

    • @sebol02
      @sebol02 Před 3 lety +1

      @@mrfixpl Dzięki! Tak myślałem bo mam dokładnie tą samą próbkę u siebie bo też chcę okleić :) A teraz jak już zobaczyłem jak wygląda to jestem przekonany na 100% :) Moim zdaniem wygląda super, do tego ta lekka fakturka też robi robotę, a wygląda lepiej niż carbon

    • @mrfixpl
      @mrfixpl  Před 3 lety +1

      Carbon jest tak oklepany, że aż szkoda czasu o nim mówić. Szczególnie gdy jest tyle fajnych folii strukturalnych.

  • @Tarhassan
    @Tarhassan Před 3 lety +1

    Cześć, czemu trzeba wymienić USB port? Mam MIB2 discover media w golfie vii z 2015 r. i zastanawiałem się czy samym obd11 z Twojego linka dam radę odblokować app connect.

    • @mrfixpl
      @mrfixpl  Před 3 lety +1

      CarPlay wymaga innego porty USB. Dokładnie nie wiadomo dlaczego (możliwe, że jest tam dodatkowe zabezpieczenie sprzętowe).
      Samym OBDeleven nie aktywujesz AppConnect, bo ta funkcja jest chroniona kluczem licencyjnym. Albo kupić w ASO albo znaleźć kogoś kto nielegalnie zmodyfikuje jednostkę.

  • @atcsolaris
    @atcsolaris Před 2 lety

    Hi i hope some one can read this and help me.
    I have a Tiguan 5N 2016, android auto is working. But not carplay !
    I have done all the software changes via Obdeleven : usb_ipod, and activate first line in interface for external media.
    But CarPlay still not working. I called my vw dealer and they said all the tiguan delivered in 2016 had the good usb port !!! I dont know how to check my usb port and any other solution...
    thanks

    • @Evgeny_Trubitsin
      @Evgeny_Trubitsin Před rokem

      Use any available on-line VIN parts catalogue (or get familiar with ELSA): enter your VIN there, check the part number of factory installed USB port and compare it with the one that support CarPlay (5G0 035 222 E).

  • @kozakistvan248
    @kozakistvan248 Před rokem

    A nice day. I would like to update the current Infotainment system in a golf 7,
    the system is a MIB1, 5G0035819 A without navigation. can I upgrade to MIB2 with navigation and android car play?

  • @Goujova
    @Goujova Před 2 lety

    I’ve a VW Beetle from 2015. VW started put MIB2 on Beetle from 2015. I’ve bought MIB2 with CarPlay licence and needed USB but I can’t use CarPlay. VW tech said that it’s car is not capable for CarPlay. Is OBDeleven can solve this? If it’s how to do?

    • @mrfixpl
      @mrfixpl  Před 2 lety

      CarPlay and few other features are protected with FEC/SWaP codes which are generated for VIN and VCRN. If you install the unit in different car, those codes will not be valid anymore as the VIN is different.

    • @Goujova
      @Goujova Před 2 lety

      @@mrfixpl Is there any possibility to solve this? VW technician that he can’t generate any activation code if car not App Connect capable.

    • @mrfixpl
      @mrfixpl  Před 2 lety

      @@Goujova If you car in not ready for CarPlay (you don't have the AppConnect icon in the menu) there's not much that you can do other than replacing the main unit.

  • @ALLMIXLTN
    @ALLMIXLTN Před 2 lety

    the carplay in my unit it, the screen goes black when plugged in but somehow you can still play spotify, have u had a case like this one before?

    • @mrfixpl
      @mrfixpl  Před 2 lety

      Try to reboot your phone first.

    • @ALLMIXLTN
      @ALLMIXLTN Před 2 lety

      @@mrfixpl I have somehow it still dosnt work, I tried three diff iphones on diff ios and two cables same thing.

    • @Evgeny_Trubitsin
      @Evgeny_Trubitsin Před rokem

      @@ALLMIXLTN Hi. Did you solved that issue? If yes - please share the solution.

  • @mosiuoamolakeng6220
    @mosiuoamolakeng6220 Před 8 měsíci

    Hi Mr Fix. My car uses the old MDI cable and I did all of the steps after retrofitting a 2018 MIB2 radio.
    Please assist

    • @mosiuoamolakeng6220
      @mosiuoamolakeng6220 Před 8 měsíci

      USB source appears when I press source but it’s greyed out

    • @mrfixpl
      @mrfixpl  Před 8 měsíci

      Have you replaced the MDI with proper USB?

  • @untaztood
    @untaztood Před 2 lety

    Czy jest jakaś opcja, by szybciej przejść do CarPlay? Brakuje mi przycisku APP. Do tego czy przycisk telefon może przenosić do CarPlay?

    • @mrfixpl
      @mrfixpl  Před 2 lety +1

      Soft poliftowy ma inne menu i tam przycisk AppConnect jest łatwiej dostępny.
      Jak wejdziesz w PHONE to w rogu też będzie przycisk CarPlay.

    • @untaztood
      @untaztood Před 2 lety

      @@mrfixpl Dzięki za odpowiedź. Rzeczywiście AppConnect jest od razu po wejściu w menu, a w Phone jest CarPlay w lewym dolnym rogu. Pozdrawiam.

  • @kaurvali
    @kaurvali Před 3 lety

    Hm kind of interesting, my 2015 Leon with mib2 had all of these already (except byte 19) after I retrofitted the CarPlay usb port.

    • @Bennnjio
      @Bennnjio Před 3 lety

      i have the same issue, does your carplay not wanna connect with USB? as mine always pops up with failed to connect.