How to Wrap Timpani Mallets Ball Style Wrap part 1

Sdílet
Vložit
  • čas přidán 1. 08. 2013
  • Wrapping your own timpani mallets is easy with a little practice and if you have the right technique. This lesson is about the Ball Style Wrap using the Butterfly technique.
    For more information and to see a detailed lesson go to www.freepercussionlessons.com
    5% Discount on any purchase at www.groverpro.com when you use the promo code FPL5

Komentáře • 27

  • @freepercussionlesson
    @freepercussionlesson  Před 11 lety

    I just made a pair of timpani mallets using hockey tape as a core and the results were very good. I wrapped the tape to a diameter of 1" and since the tape is an inch wide I trimmed it with a razor knife to a width of 1/2". So, I ended up with a core that was 1"x1/2". Then I used two layers of Germanic felt to cover with a ball wrap.
    The mallets are very warm sounding and great for rolling. The tape provides a good amount of weight, but without being too hard.

  • @MulliganPercussion
    @MulliganPercussion Před 11 lety

    Thanks!

  • @freepercussionlesson
    @freepercussionlesson  Před 11 lety

    Yes. I would use a cork from a Champagne bottle. Just cut the top off. In this video I'm using a cork disk I found at the Corkstore on line.

  • @freepercussionlesson
    @freepercussionlesson  Před 11 lety

    Thanks for pointing out my error. I was thinking of the dimension of the felt needing to be smaller so I inadvertently said that the felt shrank. It does stretch by about 1/2" or so in my experience, but the stretching factor changes with the size of the mallet. The ratio of stretching to diameter of the felt will change, so there will be some trial and error involved.
    The American Felt that I've ever used doesn't stretch quite so much because of it's density.

  • @freepercussionlesson
    @freepercussionlesson  Před 11 lety

    For bass drum beaters I use a Cartwheel wrap. I demonstrate how to do that in another video that you can find on You Tube or my free percussion lessons site. I'm wrapping a timpani mallet with a cartwheel wrap but the technique will be about the same.
    Thanks for your question and I'll get around to making a video about bass drum beaters before too long.

  • @teoteo108
    @teoteo108 Před 6 lety

    Thank you for your sharing. This is thing I need ^_^.

  • @freepercussionlesson
    @freepercussionlesson  Před 11 lety

    You have to have the right material to work with. There are two basic types of felt that work for timpani mallets known as German Felt and American Felt. In this video I'm using some Germanic felt that I bought from Steve Weiss Music

  • @freepercussionlesson
    @freepercussionlesson  Před 11 lety

    Further to your American Felt question....I don't use American felt for my ball style mallets. I use American for Cartwheel wraps.

  • @AnimationDiana
    @AnimationDiana Před 6 lety

    I used the pre-sewn felt heads from music123.com. They were fairly easy to replace and worked nicely, despite the fact that I can't sew.

  • @MulliganPercussion
    @MulliganPercussion Před 11 lety

    Just to clarify, the felt is stretching half an inch, not shrinking? How does American felt differ in this regard? Thanks for the extremely helpful video!

  • @voiceevac218
    @voiceevac218 Před 11 lety

    do you make bass drum mallets or is that the same?

  • @fabiangersob4805
    @fabiangersob4805 Před 3 lety

    Hey man! You do a great job making these mallets and lessons... I have experience making marimba/xylo/glock mallets, and now I'm into timpani mallets making, and I would like to ask you, You know where do I can find these nylon pieces used for making felt disk Viennese-style mallets? Do they have a name or brand in specific? I would like to get some! Doesn't matter if I have to import...
    Thanks

    • @freepercussionlesson
      @freepercussionlesson  Před 3 lety +1

      I have home made sticks that use 1/4 nylon bolts but I’ve not done that. You can buy just the shaft to add your own flannel from Freer Percussion I think.

  • @rojanmanandhar6838
    @rojanmanandhar6838 Před 7 lety

    here's several ideas for making marimbas
    Attend a school or self-study via an online course
    Make sure you are fully committed to it before you begin
    (I discovered these and the reasons they work on Delfords magic plan website )

  • @meiyimau
    @meiyimau Před 4 lety

    Do you know what density the German felt has? Weight per square meters.

  • @GoOKuSj33
    @GoOKuSj33 Před 11 lety

    That "cork" you mentioned at the beginning, it´s the same thing that comes in wine bottles?

  • @GoOKuSj33
    @GoOKuSj33 Před 11 lety

    Tkz! You don´t find this information in every place, i made a pair of mallets with cotton, but doesn´t work so well.

  • @Indigosunmusic
    @Indigosunmusic Před 10 lety +2

    where do you get the shafts from?

  • @popojudo
    @popojudo Před 4 lety

    Hello ! I'm in France and i would now where i could find some felt ? Thank you !

    • @freepercussionlesson
      @freepercussionlesson  Před 4 lety

      There are companies in Germany that sell timpani mallet felt. Kolberg and Daimer in Munich. I can't tell you exactly where you could find felt in France, but if you find a piano repair company they could help you find soft piano damper felt which will work very well. Happy Mallet Making!

  • @freepercussionlesson
    @freepercussionlesson  Před 8 lety

    You can buy timpani felt at www.steveweissmusic.com

  • @freepercussionlesson
    @freepercussionlesson  Před 8 lety

    I have some shafts for sale at www.freepercussionlessons.com

  • @abrahammontilla7249
    @abrahammontilla7249 Před 7 lety

    cómo se llame eso blanco que le pones a la baqueta

    • @freepercussionlesson
      @freepercussionlesson  Před 7 lety

      Es el alemán Felt. En los Estados Unidos puedes comprarlo en www.steveweissmusic.com.