Project Legacy: Parking Sensors + Display Done!

Sdílet
Vložit
  • čas přidán 5. 12. 2017
  • Product link: goo.gl/mkiutD
    Support My Channel on PATREON: goo.gl/P8rLWn
    FACEBOOK Page: goo.gl/iEE27T
    VLoging CZcams Channel: goo.gl/al5HLa
    GoPro CZcams Channel: goo.gl/WPHQIm
    Shop: goo.gl/X18CZF
    Hey Guys!
    Today I finished off the install of my parking sensor + camera control module and got it wired up to the stereo and power and mounted it.
    I also spent the time with the stereo out to completely overhaul and tidy the stereo harness(s) as with all of the things Ive been addicting, its been getting a bit messy.
    All fixed now though.
    Choose to be Happy & I will catch you next time.
    Ka Kite Ano
  • Auta a dopravní prostředky

Komentáře • 35

  • @360ModsandHacks
    @360ModsandHacks Před 6 lety +1

    I had no idea what my radio meant when it said "ATT" but you just blew me away since I've been in car audio for 2 years and haven't known what it meant! Thank you haha.

  • @joeschneider67
    @joeschneider67 Před 6 lety +8

    What model of pioneer is that? And about the sensor kit? And how that kit is comparable with your studio pioneer system?

  • @alexanderstein5379
    @alexanderstein5379 Před 6 lety +1

    What unit did u get for the front camera and sensors for the front as well as the rear sensors . ? Send me the link for all of it . I love how it works with the Indash !

  • @liamkelly5850
    @liamkelly5850 Před 6 lety

    Hi James, great video! Do you have experience with Ford Falcon ICC units? In particular FG MKII.

  • @Tim_who
    @Tim_who Před 6 lety

    Also I have mounted ir’s in the vents before outta sight out mind but still works well. Just an idea. 👍🏻

  • @macartanmcquaid22
    @macartanmcquaid22 Před 2 lety

    Hi there, nice video(s) 👍🏻
    So, is it a single video out from the sensor control box for both cameras with a single input for the rear of the stereo?
    I see now they have changed the product on Ali Express. Seems to be three control units, front, rear and a main control unit.
    Not sure why they'd separate it 🤔

  • @CHAPMANENGINEERINGLTD
    @CHAPMANENGINEERINGLTD Před 4 lety

    Would this module work with a car that already has rear sensors and camera?

  • @aa999xyz
    @aa999xyz Před 6 lety

    looking pretty good, product link?

  • @Clint_L
    @Clint_L Před 6 lety +4

    Nice one dude. Idea for the remote. I’d be hard wiring it to an OEM momentary buttons. Then extend the remote sensor.

  • @malcolmglover2404
    @malcolmglover2404 Před rokem

    I have a new aftermarket stereo and was wanting to connect reversing sensors to it, been told it can’t be done, how have you done it

  • @joep4623
    @joep4623 Před 5 lety

    Can this brake the car? LIke the RAB reverse automatic braking? That way you don't have to even look at the screen. The vehicle stops itself when close to any object.

  • @user-nm2pm7od6d
    @user-nm2pm7od6d Před 5 měsíci

    Hello AWESOME video really appreciate your videos, ive got a DMHA4450BT Pioneer unit and Im going to see if it will work with it.

  • @AndrevandenBergNZ
    @AndrevandenBergNZ Před 6 lety

    I need sensors installed around Auckland NZ? Are you around or could you refer me to someone please? Thanks A

  • @AboubacarKeitaS20
    @AboubacarKeitaS20 Před 6 lety

    And i thought I was a weirdo for listening to that song. Thanks for making me fell "normal" knowing you listen to the song too

  • @Tim_who
    @Tim_who Před 6 lety

    James, around the 12:18 mark when your putting the glove box in, what is the red roundish, cylinderish thing near the kick panel,

    • @caraudioetc
      @caraudioetc  Před 6 lety

      Emergency Flare
      They usually get removed from cars when they come into the country but one car that I worked on still had it.
      So I asked the customer if I could have it and they said sure.

    • @Tim_who
      @Tim_who Před 6 lety

      Ha that’s pretty cool.

  • @timhenry8475
    @timhenry8475 Před 6 lety

    James....can you display in a video what steps you take to prevent or stop the ‘pop’ noise from amplifiers turning on

    • @caraudioetc
      @caraudioetc  Před 6 lety

      it never happens with any of the gear i install so i dont have to prevent it. try changing stereo or amplifier.

  • @martintodorov9763
    @martintodorov9763 Před rokem

    Hello i have the same car and android head unit and rear camera which working normaly. I want toinstall parktronic but with dynamic radar, like your. Can you tell me what model shud i buy and how to connect, i want exactly like your?

  • @Roy-n-Jinkee
    @Roy-n-Jinkee Před 5 lety +1

    I have a big 2011 sprinter van and installing an alpine halo 9 and wish to add parking sensors and cameras , what kits are you using?

  • @MJGZ51
    @MJGZ51 Před 6 lety

    Great video. What happens when the front end of your car is parked against a wall and you want to listen to your stereo? Do the sensors continually beep (seems like they will)? It might be a suggestion to incorporate your park/neutral switch into the system to have the system only activate when you're in gear...just an idea.

    • @caraudioetc
      @caraudioetc  Před 6 lety +1

      Good question
      If your parked right up against something, the constant beep only ever stays on for maximum of about 20 seconds then stops.
      I can also simply push the mute button on the remote to mute the beep output.

  • @360ModsandHacks
    @360ModsandHacks Před 6 lety

    Can I also get the model number of the assist unit you installed?

  • @dansolo9978
    @dansolo9978 Před 6 lety

    Hi James... New Subber from England/Manchester, been watchin' now for bout a month, loving Your attention to detail, as well as ICE...
    Here's one for Ya My first Amp was a Pioneer GM-2200 Powering 2 x Mackenzie 12" Bastards in the 'Back Shelf..!' No LPF or X-Over just nice Full range, oh they loved it, I think they were from an old disco Speaker that I got for 50-pence at a Jumble sale, and F*@king Buzzing wasn't the word, when I got that Box home and opened it..! Hahahah - oh please it was an MDF shelf btw, We weren't complete amateurs, but we were still just 17, and STILL Learning, then some Jabroni F-in smashed My quarter window opened the back door, down with the seat out with the shelf, took a chance at reaching under My driver's seat, found My Bloody Goodmans Pull-out, and proceeded to Rip half My dash out whilst pulling out the damn cage.!! Grrrrr..!
    Top install btw Love the use of the Relay - 'Earth' as the Tel Mute, what a Brilliant Idea Lad...
    Keep it up...

  • @renomacca1967
    @renomacca1967 Před 6 lety +1

    staggard crimps save space

  • @cjenner865
    @cjenner865 Před 6 lety

    RX-7

    • @caraudioetc
      @caraudioetc  Před 6 lety +1

      That’s what it was! You’re onto it.

    • @cjenner865
      @cjenner865 Před 6 lety

      Car Audio.etc Anytime! Great content.

  • @robloxfan4271
    @robloxfan4271 Před 6 lety

    that beep sounds like the toyota prius when u put that in reverse

  • @RockfordF150Bass
    @RockfordF150Bass Před 6 lety

    Sorry bud but i have to say it. Project legacy is boring☹

    • @caraudioetc
      @caraudioetc  Před 6 lety +1

      That’s cos the sound system is finished.
      It was always going to get towards this point where there’s less and less to do.

    • @RockfordF150Bass
      @RockfordF150Bass Před 6 lety

      MultiRated Pilot awesome i like all of his videos just need more variety. I understand when the main stuff is over the not so fun part has to get finished up. But i love to see components,subs and custom work being done that's where we learn from the good stuff!! Cheers mate 👍👍