Sony A7III Screen Replacement | Broken Screen A7 iii
Vložit
- čas přidán 23. 10. 2021
- Sony A7iii screen cracked? Here's a quick and simple guide for A7 iii screen replacement. Finally say goodbye to the broken screen A7 iii for good.
Sony A7 iii screen replacement part: amzn.to/3pGaaJs
Nylon spudger tool: amzn.to/3BbwCfC
Screw driver kit: amzn.to/3GfeNjH
Tape: amzn.to/3GhwFKR
Tweezers: amzn.to/3GsPOd1
Screen glue: amzn.to/3b8sLFD
1 tooth pic!
#SonyA7III #BrokenScreenA7iii #A7iiiScreenReplacement - Auta a dopravní prostředky
Thank you, just successfully replaced mine with your video.
Hello Angelo, I'm happy to know your replacement was a success. 🤓
Thank you for this. I’ve been searching for a video like this for about 2 years now.
My pleasure! I was very surprised to find there wasn't a video on it yet!
thank you for such clear and concise directions! I just changed my cracked screen. Took 15 mins and saved me $$ and time sending off my camera to Sony, Keep up the great content!
Thanks for the help just used your guide to replace my screen and it's working beautifully. Word of caution to anyone doing this:
1. The back plate can bend very easily, make sure to "unbend" it when putting everything back together.
2. The ribbon cables are very delicate and require a very good connection with the motherboard to not fall out of place from movement. (learned this the hard way when the touch screen randomly stopped working)
3. Ensure you use some adhesive between the screen frame and new screen to keep everything nice and sturdy.
Just got done replacing mine! Huge help man, definitely saved me hundreds of dollars with this one. Thanks for making this video.
I'm happy to know your replacement went well! Thank you for sharing, and the video is my pleasure!
This is wonderful, thank you for this thorough how to!
My pleasure! 🙏
This was helpful for me in replacing my Sony A7C's screen too, albeit with a few differences because of the change in design. Thanks!
Great to know, and thanks for sharing!
Thanks a lot! mine just gone black, going to try to replace it for towing your video.
Just fixed my screen! In total it cost me $40 USD for the glue and the screen. 30 min of work and it is perfect again! Can't thank you enough for the well made video.
Hey Caleb, that's great news! I'm happy it panned out well and you were able to save a lot of money and time! Thank you for your comment and the video is my pleasure 🙏
Successful replacement here too, thank you!
My pleasure 🙏 Great news, and thank you for sharing!
Perfect explanation man. Definitely going to do this now instead of sending to Sony
Thank you 🤓 Let me know how your repair goes!
Awesome, this was so helpful!
I'm happy to know the process in the video was helpful for you. There aren't many videos on this stuff. 😳
Amazing thank you for this
Hello Jake, it's my pleasure! Thank you (:
Wow amazing 🔥🔥🔥 thanks dude 🤙🏾🤙🏾🤙🏾
My pleasure 🙏 thank you!
Thank you!
My pleasure! 😎
Needed this
Otimo video, OBRIGADO
¡Gracías!
Appreciate it!!!
Excellent
Thank you! 😎
Thank you for this video! The screen replacement part is no longer available, do you have.a link to an available replacement part?
My pleasure! Here is a link to one on ebay with slow shipping for cheap: tinyurl.com/ye25shyr
Beautiful tutorials… does this work with the a7sii ?
Thank you so much 🤓 I imagine the process would be very similar but not exactly the same for the A7Sii. I believe the part number for yours is Sony part#: 1-811-695-43
Very helpful video. I just accidentally damaged my sony a7s3 screen. Is the replacement process identical to a7 iii and do you have an idea where to buy the replacement screen for sony a7s3? Thanks
Thank you! There is a website called "Sony Encompass" which sells genuine Sony replacement parts. I would recommend checking there for your A7SIII screen. I am not sure of the process for the "S" model, though I imagine it would be quite similar.
Have you ever tried to fit a replacement lcd for a a7 SIII into the A7 III (it is a little bit higher resolution, 1.229k dots vs 922k dots)? The ribbon cable looks similar to me and both are 3 inch. Would be a nice upgrade
Hello Benjamin, if the screens are interchangeable, this would be an awesome upgrade! I do not believe they are, but I have no attempt to confirm my suspicions. Let me know if you decide to try it!
@@H3Humper Thank you for your answer! If I try it I will let you know. But it‘s a tough decision since my screen isn‘t broken (I would do it just for the upgrade) and the A7 SIII screens I can find are a bit pricey (about 150€, which should also be about 150$). I once replaced the panel of my laptop from 720p to 1080p, which worked fine. So I‘m hoping to find some information about that before I buy a replacement screen
@@benjamin5126 I bet the screen upgrade on your laptop was pleasing! I'm excited to find out if the Sony swap would work.
Lighter fluid to remove any glue.
Thank you for the video, I need to replace my screen. The replacement screen in the Amazon link is no longer available. Have you used any other replacement screens that you might recommend? There are a few on eBay, but I'm unsure of the quality. thanks
My pleasure 🙏 The sellers seem to sell out of screens quite quickly. Purchasing through eBay is okay, though they send the wrong screen from time to time. For example, they sent me the incorrect screen the first time. I told the seller and they sent me the correct one free of charge, though swapping the screen a second time was inconvenient. Sony Encompass is an excellent, high-quality source for parts and part numbers. encompass.com/brands/SON/Sony
@@H3Humper Thanks
The amazon link to the screen says they are out of stock and not sure when re-stocking. Can you please recommend another good quality replacement?
Hello Lance, here is a link to a good site for Sony parts. 🤓 sony.encompass.com/item/11659864/Sony/A-2203-126-B/
Great tutorial ! But for me unfortunately screen still doesn’t work as I was shooting in rain so I believe that motherboard for LCD screen is gone… I have checked both original screen and replacement. Non of them light up… I have to use viewfinder or use external monitor for photos 🤷🏼♂️
Thank you! Having to shoot through the view finder is a bit limiting, I imagine. Have you searched for a replacement board?
@@H3Humper I have gave my camera for repair which cost around £160 which isn’t that bad but the inly thing is I had to cancel my photoshoot last weekend 🤷🏼♂️
@moodyguy well darn, missing your photoshoot stinks. I'm happy to know the repair isn't too spendy.
@@H3Humper One company told me £350+ 💀💀 so £160 is nothing 😂
Does thuis work the same for the rx 10 iii?
Unfortunately, I do not know the answer to your question. Please leave an updated comment when you determine if the process was different.
My screen was replaced at precision camera ripoff and after I they sent it back I did not use it for few months, and once I was planning to use it the new screen stated action weird changing colors, flickering and then going to complete black and next day it will start working normally for few minutes and it will start doing the same. First screen was damaged by salt water, so not sure if they replaced ribon cable or just the screen but now I can not even ask them to fix it again because they only give 3 month’s warranty and I did not even use camera I that period to notice that they did not fixed it correctly. Do you have idea what is causing this weird behavior.
What a tough situation, and being without a camera is no fun. I am wondering if maybe the connection is not clean or possibly the new screen is faulty. Very difficult to say for sure. Let me know what you find out!
Try replacing both cable and screen again your self only 30 bucks together on evay Make sure you use tweezers and take your time!
Are the cheap replacement screens different in quality than the original? Brightness, Sharpness, etc?
I did not notice a difference in quality between screens. I am doubtful the cheap screens with the Sony logo are genuine, but they do seem to function properly in my experience. To answer you other question, the Sony Encompass parts website has genuine parts and is a great resource for finding parts.
I need lcd panel screws so where we get
I am not sure :/ I did a quick search and couldn't find any! Do you happen to have any of them? If so, one option would be measuring the "pitch" of the screw and ordering them from a machine screw supplier.
does this work for the a7r iii as well?
I am not sure if it does or not. If you repair yours, let me know how it goes! I can't imagine it would be too different.
do you use the same screen for the a7riii?
I believe they are different screens 🤔
Hello. Want to replace my lcd on a7r3 but in the service they told me that it need to be calibrated after the change ... truth or not ?
Hello Igor, I am unfamiliar with a recalibration process. On the standard A7iii, I did not need to calibrate anything for it to function properly. They are two different screens, so there very well could be a calibration requirement for the 'R' version, but I truly have no idea if it does or not.
@@H3Humper thanks
Amazon replacement part is not available anymore 😞
Darn! Have a look on ebay or 'Sony Encompass.'
Where did you buy screen?
Feebay
About to do mine if am successful at it I will make another comment
Sounds great! Let us know how it goes 😎
Where did you buy?
Yes, from eBay 😎
Is the a7riii just as easy as this?
I am not sure 🤔 Maybe someone else can comment on the R version. I imagine it shouldn't be much different considering they are similar in design.
Just in case this helps anyone else, my screen was actually broken from water damage (salt water to be exact) and a replacement screen solved the issue for me.
That's great news! Thank you for sharing, and I'm sure it will be helpful for some people who had a similar issue 🤓
Can this work if my screen gor damage by a shampoo. I accident leaked the shampoo in. The screen still working,but. It’s flickering.
@@JP-qq2wy it should, sounds like it’ll be water damage like mine was. I was worried that if the screen got wet it would mess up the insides of the camera but it’s sealed pretty good and it only affects the screen, so this method should get you back to 100%
Mine was also damaged by salt water and replaced at precision camera for a lots of $ and and after they fixed it I did not use camera for a months and once I wanted to use I noticed similar issue, screen will work and then it will start changing colors red to blue etc or going completely blank and after some period it will start working again so not sure what is going on and why they did not fix it
I did this, and it caused a spot on the large riven cable to burn and it stopped working. Any ideas?
Sorry to hear that :/ At what area did the large ribbon cable burn?
@@H3Humper I plugged it in, it smoked and I noticed a small burn at the top stripe on the large ribbon. The one closest to the end
Can you upload a photo to Google photos and link it to me? Or email
@@H3Humper what’s a good email for you?
I think you out the cable in backward mines got hot and I turned it off fast and swapped which way and should work now!
2mm double sided tape for electronics.
Sounds like an excellent product for the job! Thank you for the recommendation.
@@H3Humper You are most welcome.
Mine didn’t work 😢
Darn... What part did not work?
The circuit board touched the camera . Rip to the camera 😥😥😥😥😥
Oh no! Is it fried?
@@H3Humper pretty much. 369 dollars in parts and labor.
@@jokerharley1271 dang... was the battery still installed while replacing the circuit board?
@@H3Humper possibly. Surprised it can get damaged like that so easily.
@@jokerharley1271 oh yes, electronics can short super easily if they have power while repairing them.