HDMI Cable Repair Without Soldering Skills

Three ways to repair broken HDMI cable without soldering skills.
First repair method is the easiest, you only need something to remove wire insulation.
For this you will need a "terminal HDMI connector" or "solderless HDMI connector" .
These types of connectors came with the case, metal or plastic and in most cases a tiny screwdriver is included for assembly.
Second method is a little bit harder, because it requires soldering, but as an advantage you can use a longer cable and have a more stable connection.
This type of connector has a lot of different names: "welded hdmi connector", "hdmi breakout board".
Third method is the most difficult, but it has a lot of advantages such as: compact design, most stable connection, suitable for all HDMI standards.
This type of connector mostly named "hdmi connector plug repair"

[@kennethbarton6201]

And you are the best I've seen on the internet to date 2 01 24

[@SamuelMazzel-pu9mu]

Thanks for the video, I tried the first method where you screw the wires to the adapter to connect a 10 meters hdmi cable to connect my projector to the AV receiver. All the connections where made well as I tried it with a tester, but It doesn't work. Surprisely this cable works if I connect the AV receiver to a TV. I thought that maybe the cable is too long and it looses quality that the projector requires. I tried to do another test connect the connectors to a short cable only 0,5 meters long. It happens the same. Now I will try the 3rd method and hope it will work.

[@garytraina6057]

Can the ground wire go into any empty terminal?

[@alanthinks]

Hello, thank you for the video.
Why did you decide to cut off 20cm of the original cable? -- Where do you recommend I buy the replacement HDMI connector? -- Thank you

[@BarelyPainted]

Hi! I used that peace of cable for further inspection and soldering practice, you can see that on the video(15:00).
The best place to get those connector is local DIY electronics stores and suppliers which have them in stock, otherwise, delivery time is unpredictable.

[@Diogoattademo]

Hi friend, which wires in the HDMI cable are responsible for carrying the video signal? I have a working smartphone screen, and I have a board similar to yours, I would like to use this screen on this board.

[@isaacfallas29]

💯

[@pasoxperez996]

Desde el puerto HDMI hembra se puede sacar un puerto USB? Es para conectar un panel táctil del mismo puerto HDMI, he reciclado una pantalla de laptop con su panel táctil y quiero que cuando conecté el HDMI me reconosca el panel táctil?.

[@elifire4147]

Do you have links to: adapter did you use with your multimeter, iron you used to strip data cables, n clamp you used to hold the connector in place, tiny wire cutters you use with the green handle?
Thanks.

[@BarelyPainted]

This is common tools and you can use any equivalent to them, following description below:
- alligator clips(included in multimeter kit) with a piece of thin copper wire;
- 5v/8w USB soldering iron;
- 150mm (6'') spring clamp;
- 4.5 inch precision wire cutters.
There are a few reasons why there is no links in the description.

[@isaacfallas29]

How did you knew what cable(the colored ones) go with each pin of the HDMI port? With the multimeter, but what should the multimeter say? Thanks

[@SethTheVictor]

it should beep

[@kennethbarton6201]

Can you do one about DisplayPort please that the big thing now ❤

[@alexanderalsvik6626]

Will there be differences in performance ?

[@BarelyPainted]

There will be no difference

[@user-rtxrxtr]

Darn! That’s lots of work. I will just buy another cable instead if there’s something wrong with it; it’s just $2.60. 🥴

[@000Orkarnikolla000]

If it's this tedious to fix why not just buy a new one lol

[@BarelyPainted]

- Cable runs in the wall;
- Cable cost is very high ;
- Reducing e-waste ;
- etc.