Spot Welding Machine Using Lead Acid Battery
Vložit
- čas přidán 11. 03. 2021
- #creativethink #welding #spot #battery
i am show about making spot welding machine at lead acid battery. the positive electrons and negative electrons combine, the heat energy is produced. the nickel or iron plate is welding
-------------------------------------------------------------------------------------------------------------
Components Link :
1. SS Nail
amzn.to/3vfn8hV
2. Lead acid battery
amzn.to/3rKdAt2
---------------------------------------------------------------------------------------------------------------------------
Facebook Page:
m. creativethinkg...
Instagram:
/ creativethinkgr
Twitter:
Creativethinkgr?s=09
CZcams: / @creativethinkideas - Věda a technologie
ये तो वाट लग गई सभी वेल्डिंग मशीन की, वाह भाई वाह
I especially like the part where drilling toward the hand is encouraged.
Perhaps you will love the "drilling monkey eyes torture video".
Just because he did it doesn’t mean he encouraged or condones it I do it all the time but I don’t say do it there’s a difference between doing something and encouraging someone to do it
All Sihks, secure beards please.
Chinese saying 「藝高人胆大」「techniques high human heart big」meaning when one's has good technique then he/she will bold to do anything.
If you make one of the probes to have a greater surface area then only 1 spot will get hot instead of both contact spots.
Thinking the same thing to use a half of a car jumper cable.
Yeah a spot, ON THE SPOT destroyer of good battery source.
Sacrifices must be made for greater good
@@josealfredfernandes LOL..
Yes very good method if your father have a factory of car's batteries. After 2-3 weldings you replace the baterry with a new one for the next 2-3 weldings :P
After a few minutes your battery is going to discharge because only 1 diode you put in your battery..
😂😂
Why...battery can be charged through solar panel
Even without diodes it works but it will damage the battery, so that's why he use diode to prevent from damaging the battery
@@keedzulkiflykeeabdjalil3536 what's the name of the diode place, can be improved more for battery not getting damaged?
와 끝내주네요 !!!
Not the best way to weld, but its how I taught my self as young teen in my fathers workshop in a similar fashion. great memories. Thanks
ชข
Connecting 2 terminals of batteries with a diode..
Safety level is directly leading to the heaven
The diode would have turned into a piece of wire on the first try. Not needed on a DC battery anyway.
@@lyndonp6296 That's a 6A4 diod... it's common diod that comes in at 6 amps at 400 volts... that's a 2,400 watt diode. It will survive that little 6v battery ... it's there for back flow protection to keep the battery from heating up... it's still a super unsafe build, but the diod definitely didn't fuze... in fact diodes can't fuze into a conductor because of how there constructed... it would glow red hot, let out it's 'magic smoke' and loose it's conductive properties then the glow would go out and it would just be a dead diod. If your lucky it happens fast enough that the thermal expansion causes a miniature explosion, but usually it's not that spectacular when a diode fails though... usually it's just glow, smoke, fizzle, dead all in the course of about a second (a really long time in electronics).
@@binaryglitch64 Yet, in my 40 year career as an electronics and computer engineer. I have replaced literally hundreds of short circuited power supply diodes and rectifiers that have turned into Zero ohm conductors.
@@lyndonp6296 okay, well if you understand enough to say zero ohm conductor than you can totally call it a wire all day in front of me and go unchecked because you know what your saying. Also because respect for elders. You started your career when I started life.
@@lyndonp6296 I am at a lost how a pn junction becomes a wire.
Copper electrodes may be better, as they don't stick to steel.
Carbon rods from batteries.
Instead of cutting the nail head you can solder it and it also helps in strengthen of the wire joiner.
Good product but what you need is some sort of fast switching mechanism.. Otherwise the current is too high to utilise and it will damage the part to be spot welded. Shorting the battery for a long time may even damage it. You can use a 200 amp relay as a switch.
Thank you, this was freaking HILARIOUS! 🤣😂🤣😂
That right, just short circuit the battery time and again.
Now why do I think that could lead to disaster ?
watching and sending support nice sharing again.
Don’t know much about welding but neither does this guy 😂
P.S. The Stanley knife blades was different angle when shown closely.
Can use 12V 5A transformer for this spot welding in absence of battery.
Very strong 💪
அறுமயான பயனுள்ளதாக பதிவு இருந்தது நன்றி சகோ
After a few second... You will hear one-word "KaBoooM...!!!!"
No he won't, it will just melt... at worse we're looking at fire with battery acid and molten plastic spilling out across the table ... in a really really rare type of diode failure he may get a small pop from the diode... but that's a 6a4 diode ... it's rated for 6 amps at 400 volts DC so that's 2,400 watts... the dioed would out last that battery... but he configured it wrong for backwards voltage protection so the battery is likely to melt... though he'll probably notice before fire starts... it's going to start warming the plastic by the terminals first and as the plastic gets soft things will begin to shift and he'll see that his terminal is say 8 mm from where it belongs and then realize he's melting the battery. That's the most likely outcome ... but kaboom has my vote... that would be way cooler.
The fixture of the nail at 2:00 is great art work! Thats whats the electrician wants to see! A connection capable of really high current - just as you need it for spot welding! But wait - its going to be even better: the diode - poor thing! Why the hell would you need a diode here??? Its probably melted to short circuit now - thats why it still works :-)
100% agree the diode isn't needed... which I guess is why it isn't in the circuit in the video when they are welding. This is not a good spot welder.
Obviously this is a diode test circuit. It works a lot like a fuse test circuit. One and done.
It seem to be good enough for certain jobs, especially if a guy already has all the components laying around like this guy typing this comment. I have a specific task is why I'm watching a few videos, the easier and more inexpensive way I can achieve my objective is what I'm looking for. I have a $10 u.s item that I would like to repair so it don't make sense to spend $30 on the circuit board and whatever else to achieve the same results in my case. I'd be happy to return to comments when finished and give a honest review of my success or failure. If anyone would be interested in honest opinion of how this performs on everyday materials? I'm not a welder or an electrician and have very very limited knowledge how electrical currents flow. The easier it is to comprehend and implement the better for a lot of people who don't have the knowledge of electrical currents and how they work and what components you need to build more sophisticated devices. Im just a regular Joe that turns to smarter people then myself i. e CZcams for ideas to aide me along. To criticize an idea just because you have a more elaborate sophisticated way to achieve near same results. Well post your CZcams video and maybe the way you suggested would be better. But is it more practical for everyone or only a one time use? Keep on keeping on fellas all these diy vids are great. And I'm sure they help tons of people..
Hey, that's some high performance sh!t right there....!
The guy just makes videos that teach you enough to get hurt but not enough to avoid it. Which is probably all he knows too. Shouldn’t be posting stupid ideas like this. Someone who doesn’t know anything about electricity and what is safe will try it because it looks so easy and simple. Dying is easy and simple to do too.
I know as soon as I hear royalty free techno and no narration, I'm 'bout to see some sh!t go down.
🤣 does this music piss you off to the point you're sat the watching in silence, stuing thinking "I would prefer no music at all, I didn't click on the link to be force fed the most shit repetitive noise ever". If I had a penny for everytime I heard these shit songs I would be loaded
@@DaVeHiLl200 guess it takes all sorts to make this world go round! Well I'm not a huge fan of this particular song the style is for sure in my top 5.
Just to share some vibes ill share a few in no particular order. Already covered the happy techno beats, the list would also have chillstep(Kygo and Vexento), extremely bass techno (good example are Breathe by Zabo and Rebels by Black Tiger Sex Machine), *HEAVY* metal (Gojira. 'Nuff said), and what I can only describe as emotional music like Her Last Words by Courtney Parker. I'm a bigger (gym not fat) 26 year old bald dude, lotta tats and scars- basically trying to say I'm no puss but that song man... it hurts. Haven't cried at a funeral yet, still do every time I hear Her Last Words lol
Mantap bosku
Hadir
Great Idea! Diode put .....I do the same but instead of steel I put pure carbon
Eline emeğine sağlık güzel olmuş
INI YG BIKIN SPOT WELDING TEMEN NYA SI UCUP...
Can make any control circuit. Just a small pulse to ensure avoid burning of the strip.
Yes, it needs a simple regulator other than that it is good stuff.
It need him electronic basic and back ground
Great for a cheap spot welder, but I suggest you do NOT use it on your battery packs! A fraction of a second too long and you are going to damage the cell! :(
I think add capacitors may help to reduce damage to battery
Didn't he use a diode
A diode is used, if still doubtful then use a dry cell carbon electrode on one end.
So what trash anyway or scrap
Should have one contact on base metal and other on the piece to be attached. Putting both on the same top strip makes a short circuit and does not create a spot weld between the 2 pieces of metal..
👍🏻👍🏻👍🏻👍🏻 desi indian jugad 👍🏻
Bahut khub 👏👏
Thank, you for you're video.
Nice 👍🏻👍🏻 🇮🇳 || Kuki.
Very great 👍👍👍 job
Ha Ha Ha you're right everybody thinking to be a professor....😂😂😂😂😂😂😂
I haven't watched all your videos, but looking back over them for the last few years: I can sort of understand why I subscribed to your channel in the first place. Most of your videos are basically harmless, with the occasional bit of fun added to get the old Mellon functioning somewhat outside its usual box of thoughts. I probably wouldn't even worry too much if my boy started flicking through my CZcams library to see what his old man's been up too... But, now: those days seem long gone. I've seen for real the damage caused to the human body by arking battery terminalls. Just the thought that someone NOT in the know might try something not too dissimilar To this.... food for thought, people. Food for thought....
Hey Ray! 40 years ago, one hot day in the shop...
A customers car that just got into a stall for a non starting issue.
Yup, the battery exploded but the hood(Bonnet)for you Brits was closed.
I have an inate fear of dead shorts in high current potential.
CZcams has tons of Darwin Award winning content.
Lityum batarya yapıyorum. Güzel fikirler ilgimi çeker. TÜRKİYE
*Soo DANGERROUS*
He deffo superglued those razor blade pieces together 🤣 you can see them move after hes finished heating them up
Saludos de JOACIN MONTOYA, inventor de escritura global y codigos Montoya... Dónde se puede hablar sin abrir la boca..
Saya lihat. Pertama kabel merah di sambil ke accu plus. Menggunakan dioda. Pas pemakaian. kabel merah tidak ada dioda.
Great achievement. Keep it up bro
Bạn là một chuyên gia sáng tạo công nghệ
Very nice bro I will definitely try thanks
Thank you for very interesting experiments!!. Erich from New Zealand
Nice!!
Are bhai ye to dangerous aag laga deoge
Hello I'm your 1 millionth subscriber your videos are amazing
It'll work but keep the fire extinguisher nearby haha
good idea, needle must be copper, better than metal, may need register to protect overheating?
Aprendi nunca tinha Visto algo do gênero foi uma aula bem aproveitada , muito bem espero que tragam novas novidades... adorei...
Também gostei!
que elemento eletrônico é esse que foi colocado no polo da bateria?
@@luigybh diodo
Tre
What is diode for and can it take the large current
Power of Flex Kwik gum 😂
Well the thing is it worked, but it would be my last resort on earth when doomsday arrive 😂
On the 5 minute of the video the diode desapear hahahahahahahah
How did you select 6 Amps for your diode?
Good point. I also did not catch the battery voltage?
@Catalina Ramirez keen observation, no diode at all. May lower power output if diode in place, and Higher output without diode but will make battery shortlived.
Uhm... that diode served no purpose and didn't survive. That's why it's missing. Pointless and just plain stupid.
What type of diode should be used, plse provide the specifications of the diode
Awesome
Bhai diode konsa used kia h esme
He put a link too some nails 🤣😂🤣😂🤣
Great, Thank you ...
Une leçon de plus
That looks kind of dangerous ... looks like it's very easy to short that battery and cause it to explode :(
quá nguy hiểm
rather than spending a few bucks on batery and other pieces, i spent the money on far more practical and safe spot welder that can act as a powerbank as well =D
First and last to that battery bro.
What is the purpose of the Diode used in series. The battery is giving DC and no further rectification necessary.
It is necessary because we are going to use it on liion batteries
@@sharikashetty1517 Thanks Sharika for your comment. However see the title of the video It is "Spot welding machine using lead acid battery". My argument is valid irrespective of the battery type. I think adding a series diode has no meaning.
@@p.p.wijesekera7388 It is extremely important. It has nothing to do with rectification. It is a BLOCKING DIODE to avoid feedback from target batteries to spotwelder battery. Basic rule for security.
The diode ensures the current only flows in one direction. It’s for safety purposes.
@@georgestiell7740 . The only reason for a diode in a dc circuit of this type would be to protect from any back emf generated by an inductor such as a relay coil but short circuiting a battery is definitely not recommended. That is a universal instruction that accompanies all batteries. An 18650 spot welder works on low voltage and high current usually by the discharge of a large value capacitor to give a short duration high current pulse.
awhsome idea what is the thing you soilderd on the batterie called
This video should be titled "how NOT to make a welding device"
Very dangerous!
hahahaaa that's being honestly mean
bahaya buat orang yang tidak bisa seperti kamu.🤣
Yes. Madness
Good job my friend😜👊👍
In an emergency situation, this would absolutely work on light gauge materials, but it is not advisable to use this setup for long term use...
Sketchy af. Just get a $20 controlled welding pens.
@@h8GW I'm not gonna carry around a welder everywhere I go, so in an emergency, if all the parts were on hand, this could get you out of a tight spot...
In the last part of the video the diode you install in the possitive terminal on the battery is missing...why?
i also noticed missing diode..😀😀😀
Because this diode of 10A became shorted or..exploded ! :-)
It's unnecessary. Serves no purpose but to make smoke and shrapnel.
What component you've used? Mentioned 6Au on it.
If you make a pedal that will create a quick contact you will have some more control and not stick your electrodes and melt everything. Just tap the pedal quickly.
not bad, next time use this battery recondition idea ...
You really needed a lake of epoxy to cement that small nail in.
🙌🙌🙌
Right let's use a welder to make a welder
What is the diode? Since it is DC, the current can only flow in one direction anyway!
Wofür ist die Diode? Da es Gleichspannung ist, kann der Strom sowieso nur in eine Richtung fließen!
4:19 proceeds to weld on a capacitor, then at 5:00 for the initial weld the capacitor is clearly gone. 🤣
Electrical tape exist during the recording of this video ? 😂
Batery will blow up!!
Soldering a wire that will heat up to hundreds of degrees Celsius? Note how the timber handle is brown from the heat... releasing all those toxic fumes from the burning epoxy. This a children school project that should be supervised and then disposed of by a responsible adult. But with millions of views the clever creator is enjoying the $$$ of his effort
There is no role of rectifier. As evident he in his final demo used it without diode. I think he added diode to fool us.
More over using battery in this way may explode. There is better way to do it instead of diode add a 2.2-5 Ohm /10 watt
resistor and at the out put add enough capacitors of 16V ratings.
Any one can comment on my suggestion. Thanks
Love from maharashtra
Nice
Il modo migliore per distruggere una batteria in poco tempo. Assolutamente antieconomico.
Just use jumper cables and put thick copper wires in the end or use nails. Simple
Is me ak swich laga dete to achha hota. Sweech trip hojati or over CURANT nahi jata. Or jalta he vo jalta nahi. Circuit breaker switch achha kam karti he.agar do patti join karni ho to ak nichhe or ak upar poin laga ne se achha kam karta.
Use ac to 12v dc adapter will be save and without harming the battery will do the job.
WF, a completely different principle, it is necessary to solder the pulse in a very short time and not slowly heat and burn,back to school my friend
Why on earth would you need to put the nail in a drill to cut the head of it off🤔 Not to mention you're going to ruin a perfectly good battery.
I guess u don't perform with a lithium ion battery or else from the nxt moment we will no more get crazy videos from you.. LoL 😂😂😂😂
Just his very last one.
Easiest way to burn the brushes on your drill , just hold it with plyers and grind it off
ابداع
Un fenomeno ......
Very nice,but won't the solder melt inside the probe covers?
No because that isn't the point of highest resistance.
@@jeffcantley9203 that's because the resistor is the point of highest resistance! Just like the probes touching the metal is the point of highest resistence, therefore the wires don't melt first...
@@Quickened1 Just like the path of least resistance is not the only path for current, the highest resistance is not the only resistance. Considering the large currents in this ridiculous "spot welder", Sourav has made a correct observation. In every case, the connections should be mechanically sound before soldering. Solder is not intended to be the current carrier as it's typically 5 to 10 times the resistance of copper, depending on the alloy used, with a much lower melting point than iron, which is about 4 times the resistance of copper.
The diode that was soldered in place was absurd. Not just because it was soldered in place, but because there is no way that diode is going to handle the current... and since it's missing at the end, it definitely didn't survive. Never mind that is served no purpose.
THIS is why people who make videos on CZcams are often dangerous. You can be king of the blind with partial sight in one eye and blind in the other.
@@DiffEQ I agree that this device is a joke, and it should only be used in an emergency, life or death situation. I was just stating the reason the solder would likely not melt, and if it did, so would all the insulation and just about everything else. You're right, a lot of dangerous people posting on CZcams...
He needs to use steel nails for electrode to ensure better resistance than copper. If your voltage can be reduced to 3V then copper is better else battery will get damaged.Good idea though I prefer a 3V source
Witam w ten sposob uszkadzasz akmulator tani sposob na te mini spawarke do lutowania (zgrzewanie ) blaszek akmulator dlugo nie podziala pozdrawiam Daerk Bytom (slask) POLAND.,,20.1. 2022r.
This is incredibly dangerous.
Hi good but aapne ek device fit kiya use kiya kehte he black colour ka he vo jo
Excellent