Make a Mini Spot Welding Machine for Lithium Batteries a $0 - DIY
Vložit
- čas přidán 23. 11. 2022
- Make a Mini Spot Welding Machine for Lithium Batteries a $0 - DIY
Thanks for watching
My Cameras :
Sony 4K : amzn.to/3HelJxO
Panasonic HD : amzn.to/3IIZ1hy
Subscribe : / giannipirola
STORE Gianni Pirola :
www.eshirt.it/gs/59d1e2db1a6dc
IF I WANT TO SUPPORT DONATE HERE:
www.paypal.me/gpfaidatediy
#spotwelding #battery #giannipirola
Follow me on social media :
/ giannipirola_fai_da_te...
/ gpfaidate
giannipirola.blogspot.it/
/ 1414458128855698
/ giannipirola71
Hello see you soon with a new project
ATTENTION: Informative video not to be replicated, all the actions of this video have been performed safely. So I do not take any responsibility in case of accidents in the replication of this object. - Zábava
I enjoyed this video and your non-verbal communication was great. ~Thanks
Mamma mia!! Ogni volta porti un progetto fantastico e stavolta addirittura due!! Veramente ingegnoso e a costo zero! Incredibile...
Grazie amico mio 💪👍
Thank you, very educational! I learned some new things. You are a good craftsman.
Thanks👍 👋
Bravo! Simple and effective!
Thanks👋👍
Thank you. It was a quick job assembling a spot welding device. Crude but serves the purpose. Well done.👍
It would be nice to add a timer to make the spot welder impulse.
this is a ghetto contraption not a welding device
Sempre tempo investito bene, quello speso per guardare un tuo video.
Complimenti Maestro.
Grazie Nik ciao
Love it and no talking, thats great.
Thanks 👍👋
Kudos! Your presentation is a dramatic masterpiece and technological teaching both at the same time. Further more it is a double barrel impartation of your skills showing how to fix a dead battery and how to make the tool to fix it, while presenting it in normal daily actions style non verbally, (pantomime). Thumbs up.👍👍
Thanks my friend 👍👋
@@GianniPirolaFaidate 😃 You are welcome my friend.
Отличные прогары!
итальянцы совсем деградировали...
Комедия по итальянски
дичь творит
@@maikl6920 поставить тиристор с конденсатором и кнопкой уже не хватило ума
Is it funny that the most professionals have the least professional tools and the least professional have the best tools
Thanks👍 👋
I
Love that. Right on point. Stupid greenhorn s. Oh! Sorry for their sakes I mean NUBES. Nobody cares enough anymore. Where are all the Artisans? Look at architecture yesteryear & look at this cookie cutter nonsense thats taken its place. Built to stand test of time Vs. Built efficiently for efficiency by the sweat & low cost labor of the illegal alien. No offenfse i fault no man wanting better for his family, but it does create an unfair job market, but its 5he fault of the banks & corporations building in most cases re-re-gentrifying communities as well as the cookie cutter suburbia housing developments & FUCKING UGLY SKY SCRAPING CONDOS 2/NO GARGOYLES, They're the ones to blame like always & why? Easy. EXPLOITING POVERTY, m o st cases 3rd world immigrants 5hat were promised these jobs. So...SET FIRE to the PREACHER Who is PROMISING US HELL, TAKE ALL THE MEDICATION TO EXPENSIVE NOW TO SALE, IN the EAR of EVERY ANARCHIST WHO SLEEPS but DOESNT DREAM, WE MUST SING WE MUST SING WE MUST SING, & in the FAC3 of EVERY CRIM8NAL STRAPPED FIRMLY to a CHAIR. we must stare we must STARE WE MUST STARE. (Something like that) "At the Bottom of Everything" by: 'BRIGHT EYES' im NOT drunk so what do I know. Maybe some one will find a new song they like after reading this comment. Awesome video. Cool toy drill what is that Chodech Trotech what wth you'd get that, you a Russian 🥧 pie or something making box pipe sparkle melt thingy & yer new fangled batteries. Fucking Hippies communist what ever don't 5ouch me im outta here! Asshole I'm a veteran ..........Of Dees NUTS COME % fight a foreign war half pint.?.#&%$/#!!!
They try to make up for lack of skill. Pros have to make do
The most skilled professionals can repair what they have or create their own tools from scratch, improvise unusual solutions when necessary, and rely on their skills to use whatever they have available to get the job done.
Unskilled tradesmen rely on the tool to do the job for them and are often helpless without their specific equipment, whereas skilled ones rely mostly on their understanding of the work and what needs to be done to accomplish their work, so the tools themselves become much less relevant. Ideally, you'd have skilled tradesmen who also have excellent tools to work with, but the skill is always more important than the bear.
@@Guynhistruckwell put.
A very fine and useful one, with some pink panther flavor!
Another job well done 👏, bravo Gianni
Thanks 👍👋
I would strongly recomend matching the cells before re-installing. Run a few charge/discharge cycles. Odds are really good that your #1going to have a fire or #2 your going to have the battery back open because the 2 older cells cant keep up with the new ones. If its only 5 cells replace them all.. But replace them with cells that you know there capacitys. Matching cell capacities is critical. If you dont have a hobby charger (imax b6, sky rc, thunder, prophet, etc) then i eould say dont take on the lithiumbattery repair/swap. Often times the control board is whats bad anyways.
the charger part has a bms installed...fire? I've tried to get one, uptil now have not succeded. maybe it's me
You don't need to match capacities, that's the point of a battery balancing system.
@@ixamraxi your mistaken. The bms wont operate as advertised if you dont pre match the cells. Please allow me to save you some time and effort. Match your cells and always check each cells internal resistance. If you do those 2 things your battery packs will last a long long time. Years and years. Especially important if your using recovered cells from laptops etc.. You can buy a hobby charger like a sky rc imax b6 for less then $50. It will charge and discharge. It will balance charge up to 6 lith-ion cells. And it will check your internal resistance. If your getting a ebike and you tinker absolutely get one. I have 4 of them so i can analyze cells i recover faster.
@@kennedy6971 It will, modern bms systems will simply limit all cell performance/capacity to the lowest one, which improves longevity of the pack as the cells slowly degrade over time. You could get slightly better performance by pre-balancing, but generally individual cells are close enough in manufacturing quality that once charged you can check internal resistance and grab a set that all show the same voltage and be confident their capacities are close enough to the advertised value that the bms will sufficiently protect them for the expected lifespan. I would seriously doubt any claim that major manufacturers are balancing more than this.
@@ixamraxi The only problem that I see with what you've written is that it only applies if you already know FOR SURE what the specs of your batteries are but we arent talking about that kind of scenario. In this video the batteries used to replace the bad batteries are probably not from the same manufacturer as the original batteries. The fella in the video doesnt say where the replacement batteries come from or how old or used they are. Neither does he show that he tested ANY of the batteries for ANYTHING. All of this matters more than you might think. Lets say that the batteries in the drill pack are LG's, rated for 1500mah's so you grab several random replacement batteries based upon the fact that those replacement batteries are also rated to have a capacity of 1500mah. What if the LG's remaining in the pack are NOT 1500mah anymore? And are you sure that those random replacement batteries are still 1500mah as well?-or ever were? AND are you sure that the replacement batteries are rated for the max continuous current draw that battery operated power tools like a circular saw demand? And are you sure that even if the replacement batteries have a high enough max continuous current draw rating to properly run a battery operated tool, does that rating match up with the max continuous current draw rating of the LG batteries that remain in the battery pack? 18650s put into power tool battery packs have a max continuous current draw rating of around 30amps and up. Your run of the mill 18650 removed from a laptop pack usually has a max continuous current rating of less than 2amps!! Now, imagine trying to pull 30+ continuous amps from a lithium battery designed to tolerate less than a 2amp continuous output. Can you say FIRE!? There is a whole lot more to "matching up batteries" than simply getting the capacity ratings listed on their outer covers as close as possible. Speaking of which, lets go back to that part of the topic. I recently pulled a bunch of LG 1500mah batteries from two 5 year old, aftermarket 18v Ryobi battery packs that werent charging anymore. One 18650 "cell" in each pack had gone bad. The rest of the batteries from each pack were good BUT all tested out at just 75% to 85% their originally rated capacity. Its normal for lithium batteries to lose capacity over time and use, so unless you test them, you have absolutely no idea if a used lithium battery still has its original capacity or not. So yeah. Im with all the folk in here who recommend making sure that you know the "TRUE" stats of your batteries by testing each before using any of them in a project such as the one shown in this video. As I said, there is MUCH more to these 18650 batteries than simply throwing a bunch with similar capacities together in a pack.
فكرة جيدة و تنفيذ متقن أحسنت صنعا
all this time I have been soldering liths the wrong way, thanks you for this!
Thanks👍👋
Nice project , thank you for sharing, the wires of the secondary should be thicker though to handle more current.
thnaks !!!! bye
@@GianniPirolaFaidate ذذطط
Couple of safety issues & suggestions here:
1. Please, for the love of God, if your gonna run the hot & ground wire through the case, use a grommet so the wires don't chafe and short out.
2. Suggestion for version 2: see if you can wire in/DIY a foot switch. Maybe salvage one from an old sewing machine?
3. Suggestion for version 2: mount a heavy duty alligator clip on your negative probe, and mount the positive probe on an overhead handle so all you have to do is touch it for the spot weld. The alligator clip will help you get a better grip to hold the nickle strip to the battery, as well as supply the ground for the spot welder.
Ok thanks👍 👋👋
Здесь нет отрицательного и положительное зажима
@vinnyboombatz1399 you have to move the - close the the + each time you do a spot weld it's not the same as arc or mig welding but I'll admit I thought the same thing as you at first. And I agree the way the wires are run through the casing is just asking for a short circuit lol I would def use a grommet or rubber hose to insulate better
I wish I had a neighbor like you 👍🏼
thanks bye
Good and fast to make converter!
Tnx Gianni!
Thanks 👍👋
We should all be doing more of this, to save the world from our piles of trash.
Thanks 👍👋
I would advise a few things for safeties sake here. A thick metal bucket half filled with sand, and some extra cable protection as it exits the case to protect the insulation from getting damaged and shorting things out.
Expect some of the Lithium Ion cells to not like this welder and start gassing and worse, when they do use the bucket and get them outside fast. Just search here for lithium battery fire and explosions. Really people be safe, this is not for the faint of heart.
Ok thanks 👍👋
z3e$`us±j=*+A
@@GianniPirolaFaidate i ve made the same project as you but i have many sparks during welding and it does not weld properly.Also i used wood to make the case for the transformer and i removed the ground cable from the input,could be this the reason?
@@thetoymaker9404 sounds like voltage too high and/or current too low
without adjusting the current - it really threatens to explode the battery.
wow, I am speechless. 🥳 A wonderful creative video. Thanks.
Thanks👍 👋
Nice work. Thank you.
Thanks 👍👋
I love the idea to use old PC power as box since it already have the connector and on/off switch! 👍 I think I will do the same as you for my next one. This said, my suggestion, don't spot weld with charged battery since it's then they can start a fire. Discharge them to like 20% (Like 3.2 volts), then you can more securely spot weld them since now not a lot energy to start a fire. Another thing, look like your weld is too hot ? Maybe try to lower your current or use a timer to cut power before it's too hot?
Thank you very Much.
ok many thanks bye
nope, tried that
to use an old PC power supply for the enclosure ✓
Grande Gianni come sempre. Ottimo lavoro
Grazie Ciao
@@GianniPirolaFaidatell
L
Ppppppppppppp0ppppp
0
H
Bravo, senza parlare in italiano, così vedono i tuoi video in tutto il mondo...ma la concorrenza come al solito non manca.
Ciao grazie
Nice. You exceeded my expectations.
Thanks👍 👋
Your video is really good, informative. How do you get this transformer is it a damaged one or good one?
Un altro attrezzo che avrei sempre voluto costruire. Complimenti amico mio per la tua ricerca e per la tua immensa competenza. Un caro saluto
Grazie amico mio Ciao
Buen trabajo, pero yo sugiero cambiar todo el kit de baterías , así la carga será pareja ,las usadas no sabemos que tiempo de vida les queda., gracias
OK, gracias, adiós
Grande Gianni sempre progetti interessanti!
Grazie Ciao
Super video👌.
is that wood on which you mount the transformer? Why? Isolation?
Просто и работает! класс! Не хватает только микрика для короткого импульса.
Наверное электронный таймер нужен, а не микрик...
@@user-ql1sm8dr1y Может и нужен, но косарь стоит, и месяц ждать.. Я всегда симистором с резистором + микрик обходился. Обойдусь и в этот раз.)))
Можно проще, сделать прерыватель на педаль, для ножного включения на любой из контактов
@@user-ql1sm8dr1y тиристор конденсаттор и микрик
Muito bom 👏👏👏
Thanks👍 👋
I’ve just run across your channel and I am very impressed. I hope I don’t sound like a jerk but I’ve watched two of your videos and I want to build some accessories for my press and a spot welder to repair some (expensive to replace) battery packs. Thank you for sharing!
Thank you very much, I'm glad you like the videos. HI 👍👋
This is a really useful video.Thanks for Sharing👍
Thanks👍👋
Dziękuję za naukę
pa, dziękuję
Уважаемый! Вы молодец!
Для ремонта на необитаемом острове, при наличии кучи металлов и старых запчастей, по технологии - "И так сойдёт!" - Просто замечательно! Супер!
Ну а если подойти к решению вопроса ремонта батарей, то куча нарушений при замене акб. Это и выбор новых элементов вместе со старыми и перегрев элементов при сварке (100% будет больше сопротивления в миллиомах), ну и не аккуратность.
Он же не русский😂😂😂
Этому уважаемому язык подпалили по-видимому. И нахрена такие ролики ваще выкладывать здесь
ему бы ещё фенибута пропить курс, чтоб тремора не было, а то руки ходуном как в запое, не удивлюсь если он за кадром ещё и пляшет произвольно
а так напрожигал дыр в ленте, такой себе ремонт
После одной точки элемент уже горячий , нельзя нагревать до красной точки , а здесь уже негодный для работы элемент .
Порожает,сваривать ячейки нержавейкой(всеобщая практика) Бьётесь за низкое сопротивление каждой ячейки,потом засовываете в жопу это,таким соединением,плюс перегрев сваркой или пайкой.Кроме постоянно оттапыренного вверх большого пальца, у большой категории токих умельцев, наблюдаю только метод,,абы как".🫢
Are you feeding the m/w transformer directly with AC or the only part you are using from the computer power supply is the rectifier?! Sorry couldn't follow the video what connections you did. Thanks!
Nice quick and serviceable spot welder! Also when you were spot welding the strips on you looked like you might have a little bit of the parkinsons going on!
Thanks👍😉
Great job!!! What was the transformer taken from?
Also, where can you get thin metal strips like you used?
I"ve been thinking of doing something like that but in a much cruder device, like using a storage battery with 12 foot jumper cables and home-made electrodes like yours. It made a much neater (and probably safer) spot welder than what I was going to use.
@@petemiddleton64 Thanks!!!
Microwave transformer
@@bonaufilho7703 Thanks. I thought it might be from a microwave.
the strips are actually almost (!) the same as the exterior metal part outside of a battery
I would strongly recomend thicker wire for the replaced coil. That wire used in the video can get hot and melt the insulation, when in use.
You are definitely right
a shorted turn is not great that is for sure..
😅
Well done! I did 2 things. For the performance 5)))
Je vous suis avec beaucoup de joie je ne peux dire que de Grand merci.
Merci 👍👋
This looks really dangerous! 💥It will only be $0 if you have all the parts already, but if you don't have a broken microwave and everything else you need, it will be more than $0.
BTW, you should not have metal rings when working with cells and welding.
every week i see them at recycle points together with old 18650 equipped laptops or on the kerbs
Or watches.... I watched a metal bracelet light up on my uncle's arm, just working with 12v. It looked painful, between the laughing. 😂
Help... I got a psu powersupply from fleamarket. When I open it has no small cirquitboard near powerplug... so if I cut wires it will be 220v directly through the green/yellow coilwire. Is that ok?!? Whats the small green board in the corner do.
Please, I REALLY need a LI welder!! Best regards Liz
hi, yes you basically have 220 direct volts. the small board would be for the switch but it depends on the case, some don't have it. If there is no switch, put one on for safety. bye thank you
Complimenti maestro 👏👏
Grazie mille ciao👋👋👋
Grande Gianni.. sempre fantastici progetti.. Mega Like💪😉👍
Grazie mille ciao super
Der mann versteht sein Handwerk 👍
Really interesting. I’m very impressed 👍
Thanks 👍👋
Bravo. Too good.
Very nice job. Genius
Thanks 👍👋
This is the first video where they didn't make it look super easy to take the second winding out. It took me for ever to do it
That should read. Add a Rheostat to have voltage control and I would also sleeve the leads through those sharp metal holes. Great job though. The other thing is to use thicker gage weld leads and add another turn to quieten the hum
There's more to using a rheostat than you've implied. How will another secondary turn reduce hum, exactly?
Sono le quattro di mattina ed ho appena terminato di lavorare in laboratorio. Ma prima di andare a dormire mi sono concesso 15 minuti di lezione a scuola di Gianni. Grazie
Grazie mitico 💪💪👍👍👋👋
Ottimo progetto, ciao Gianni
Grazie Rocco ciao
Clever build. We shared this video on our homemade tools forum this week 😎
Thanks 👍👋
Bellissimo progetto , geniale aver usato l involucro di un alimentatore da pc per contenere il tutto , dirò una cosa ovvia già detta , se aggiungi un pedale ed un timer monostabile al primario , fatto ad esempio con un ne555 ed un triac , si potrebbe avere forse più precisione e ripetibilità nelle saldature , bellissima realizzazione come sempre, complimenti.
Grazie del consoglio 👍👍💪💪. Ciao
Да, именно так, иначе можно перегреть литиевые аккумуляторы и они взорвутся !
Non ti smenisci mai, bravissimo. Se avessi usato un filo di rame più grosso peril trasformatore, però, sarebbe stato meglio.
Avrei avuto più ampere e non va bene. Per questo ne ho usato uno più piccolo. Per questi lamiernii non ne servono molti. Ciao grazie
Thank you hopefully it is blessed .
Можно было просто припаять используя флюс для пайки стали или таблетку аспирина, если нет флюса.
Делать сварочный аппарат имеет смысл только если вы ежедневно проводите такие же ремонты.
И пускатель поставить с ножной кнопкой, прижал нормально контакты и включил толчками.
Хорошо, спасибо, пока
Греть нельзя, можно потерять какойто % от ёмкости!
@@almotik8514 пусть паяет, он ещё не видел и не ощущал как они хлопают 🤣🤣🤣
и не просто хлопают, а с огоньком 🤣
когда увидит - бум от кондёра для него будет комариком
При такой сварке элемент уже можно выбросить , чудо что он не прожёг элемент . Хорошая сварка происходит за счёт кратковременного импульса тока большой силы . Тогда и элемент не нагревается выше 60 градусов , и пластину оторвать невозможно .
Мощно, ничего не скажешь.
🗣Super Gianni!!!👏👏👏👍👍👍
Grazie mille Ciao
Excellent!!!
Je cherche à fabriquer une soudeuse par point mais avec le même transfo pouvoir souder des plaquettes comme sur votre vidéo et aussi pouvoir souder des tôles avec "contact par pincement". votre vidéo m'a donné une idée.
Merci👍👋
Одного не понял: накуя было отрезать старые перемычки с дырочками от оторванной сварки и приваривать новые???Чтоб видео снять?
Старые кривые косые, плоскости примыкания нет, ток будет плохо протекать. Я бы тоже новые приварил 0.2 толщиной.
Я тоже не понял. Но это загадка мастера..
@@alenikverЯ старые выравниваю молотком и затем припаиваю. Все получается отлично и никакого риска прогара.
Легче приварить новые , чем старые оставлять , при плохом примыкании или не будет нормального контакта , или можно даже элемент прожечь .
Ничего не понял,но очень интересно
I like that buzzing sound
Thanks👍 👋
Add capacitor for power factor correction it will work alot better
Thanks👍👍
главное чтобы напряжение вторичной обмотки было U=> 4 - 5
НЕ смешите. Чтобы варить кузовщину, надо делать споттер минимум на двух трансформаторах и с обмотками сечением не менее 35 квадратов медм.
Прежде чем выкидывать отдельные батареи надо было попробовать их зарядить не выкорчевывая их с места зарядником для сотового телефона. Некоторые поддаются зарядке до полной ёмкости. Может быть не пришлось бы их разбирать.
Хорошо, спасибо, пока
@@koss7210 Посмотрите промерку напряжения до демонтажа банок. 3 шт по 0В, одна 2 и одна 7 (как может быть 7?). О чем это говорит? Какая балансировка. Хоть бы полосу под обрезанные пластины засунул - ан нет, поверху и пожечь сильнее,что бы термоусадка двух соседних АКБ подплавилась. Проще было бы подпаять.
@@user-nu1ev7ci8z посмотрел, там не 7 а 0,07в.
Вот на каждой 0 - 0,07 - 0,02 - 0 - 0,02в - это что за напряжение на банках? Какой балансир, тут батарею З/у не видит и не запускает. Нужно вручную каждую банку зарядить и на остаточную емкость проверить, хотя литий если разряд ниже 2-2,5 вольт - то там такая потеря емкости и деградация, что в мусор сразу ото всё...
А этот мастер итальяно, что-то там намерил, оторвал, припаял. И Хорошо, Спасибо, Пока!)
Короче Джованни криворукий "мастер" ломастер. От таких одни проблемы после ремонта. В итоге этот аккум от шурика в мусор выкинуть!
@@koss7210 Я тоже удивился, что сразу три и в нуле. Ну в крайнем случае 2 и то какое то напряжение должно быть. АКБ все однозначно в мусорку. Мне кажется с платой БМС не все в порядке.
@@user-nu1ev7ci8z дело не в Бмс. Сам аккумулятор со свалки, давно валялся, год может и больше, поэтому все банки в "ноль" - такое в мусор. Он поэтому может так небрежно паял, зная что потом просто выкинет его
Watching his bare hand so close to an angle grinder and then not using gloves for 90% of the process holy crap, I know you probably won't listen to a young man but yeah I would advice some safety precautions here but I think you will just say I've been doing the same thing for years and I will just say you have just been lucky for years but it's your call your content is suspenseful though lol
بارك الله فيك أخي
شكرا الى اللقاء
I respect your ingenuity, but this looks dangerous as all get out! Basically, if you touch your contacts with it turned on, you're getting zapped. Plus, the more you don't have a load on the secondary the sooner your transformer will be burning up due to eddie currents.
Thanks👍👍
What is your input voltage? Is it 220 vac or 120 vac? Do you know what the output is on the secondary side. I am in USA, would I still do 4 turns?
CevaP veremedi. Çünkü anlamadı.
He couldn't answer. Because he didn't understand.
WHAT IS YOUR LINE VOLTAGE? 220 or 110 vac?
More then likely 220
220v . 7:00 минута ролика
The KO ones are probably still good push the thermo button back down under the + side 😉
C’est une bonne idée bravo
Merci 👍👋
Половина приварил половина прожёг, так и в аккуме дыру можно проделать и тогда если дело пожаром не закончится то считай что повезло
Хорошо, спасибо, пока
@@GianniPirolaFaidate да нет останься давай ещё поболтаем
@@GianniPirolaFaidate Я в общем то не притязательный человек к чистоте , но извини дед, а судя по коже на руках , вижу ты уже давно дед, так вот, прежде чем выставлять свои руки на показ в милионные аудитории, ты хотя-бы немного почистил грязь под ногтями , и не позорился! Ногти вообще то ещё постричь можно, конструктор!
@@pavelm5891 рабочему человеку простительно! Вообще то он теперь мой друг, он обещал мне по завещанию оставить точечную сварку😁
@@Aleks-kj1ww8ds8x Слабая сварка эта. этот трансформатор может не только фольгу, но и толстые листы стали до 3мм толщиной сваривать , только надо туда медный провод на 35 мм2 и три витка намотать.
Какая дичь 🤣 на 11:11 он варит как дуговой сваркой. Его счастье, что он не прожег аккумы и все это не бахнуло. Нужно сначала прижать электроды, а только потом подача напряжения на первичную обмотку. Желателен таймер для подачи коротких импульсов. Вторичная обмотка тонкая, 10-ка, нужно 35мм как минимум. Ужас.
Так у него и лента никелевая тоже максимум 1.2 мм . И то греет её до красна , а это хана элементам
Interesting use of microwave transformer, would rectifying not help the welds? , thankyou for posting your project
Thanks👍 👋
Useful video on spot welder all the others I have seen were impractical and the fixing the batterys on cordless drill batt packs is definitely a positive .
Это скорее как делать не надо)
Спасибо добрый человек!!! У меня все есть чтобы повторить твое творение для пайки аккумуляторов!!!
Grazie ciao 👋👍
Получилось?
@@rusuion8775 нет, это ужасно.
Для убийства аккумуляторов ! Потому как так сваривать нельзя , Явный перегрев . Я тоже начинал именно так , выбросил немало элементов .
Very good I like your project keep that way
Thanks👍👋
Absolutely the best video on how to burn the house down and put your family at risk, top job👍
😂😂😂😂
Берегите себя.
спасибо, пока
@@GianniPirolaFaidate You did not understand him, it was to put it mildly, sarcasm.
What gage wire did you use to rap around the transformer? So I may make the same. Thanks
3mm cable for batteries. bye thank you
Very good!
thanks !!! bye
Spot welder should allow the current for a small fraction of the time when it's pressed, when you're replacing cells in the battery you should do all cells not only 0v's. And those welds are really terrible. It's 0$ fire hazard and I would go buy normal replacement if I had to do this.
0$ fire hazard hahaahahahahah 🤣
Ай да Идея полный бред.
Хе за то чтобы попасть к доктору ДЮ 🤣🤣🤣😂😂😂
nice idea thanks
Thanks 👍👋
MUY FINO ESE CABLE AMARILLO PARA FABRICAR ESE TRANSFORMADOR PARA HACER PUNTOS DE SOLDADURA !!!
Thanks👍 👋
Какую же херню он сделал. Суть точечной сварки - высокий ток при минимальном времени контакта. Один день у тебя или АКБ рванет или от перегрева изоляция с проводов слезет и закоротит на корпус БП.
БП боеприпас?
Или это что такое?
Безпилотник ?
@@user-sl4ck2be4c Я думаю, учитывая контекст и содержимое видео, не трудно догадаться, что речь идет о блоке питания.
Quello di sostituire solo le celle guaste è una pessima idea.
Ok grazie ciao
Excellent. Thanks
Thanks 👍👋
I would think you would have to isolate each battery to get an accurate reading on them with your ohm meter .
Sorry! But, you forgot to tell me: what kind of transformer is needed?
От микроволновки, любой.
От СВЧ-печки
Microwave
I think it's from a microwave oven
Так чаще прожигает,как сваркой,я поставил микрик,на вкл.220в на одном электроде,держак сделал из кусочка фанеры плоским,типа рейки,а жала из провода заземления 3мм,прижимаю-нажимаю и отпускаю микрик...и ВСЁ...контакт не дрожит,искра не скачет и получается чистейшая КОНТАКТНАЯ сварка.
Все равно не понимаю что куда подключает. Трансформатор от чего он взял и к чему припаял? Ни схемы ни копонентов не привел.
@@user-hz1ew1jr9d Советую и не стараться понимать. Особенно момент приваривания. Следующий по глупости будет приваривать газовым резаком
@@user-hz1ew1jr9d Трансформатор от микроволновки. Вторичка удалена. Вместо нее несколько(2-4) витков медного провода. При сварке важен ток, а не напряжение, поэтому важна толщина провода, а не число витков. На видео провод тонковат. Собран самый примитивный вариант, поэтому много искр, что не есть гуд. Повторять не рекомендую. Это хрень.
@@alsm61 спасибо!
Я просто ударяю по микрику пальцем , чтоб не перегреть точку . Буду переделывать держак по типу китайских - микрик на один из электродов поставлю , а ставить релюшку пока нет желания возиться .
Ужас! Опасная вещь. Не рекомендуется к повторению!
Nice work ❤❤❤
Thanks👍👋
great DIY. after wiring , to check voltage on the output how much Volt do we have to see?
Thank you. I don't know how many volts it is mm I'm focused on the amperage. keeping it low so it doesn't burn. bye thank you
Переломал кучу всего ... чтобы в итоге сделать никудышнее чёрти шо ... !