We Build and Dyno Test 6.0L Power Stroke Compound Turbos! | Power Driven Diesel
Vložit
- čas přidán 13. 10. 2022
- Follow along as we build compound turbos on this 6.0L Ford Power Stroke diesel engine. Learn what goes into this build and how it impacts power, performance, and more. Then, head over to the shop and pick up turbos and parts for your Power Stroke diesel today.
Power Stroke Turbos:
powerdrivendiesel.com/product...
Power Stroke Parts:
powerdrivendiesel.com/product...
Power Driven Diesel is a specialty performance shop engaged in the engineering and development of high performance turbo diesel technologies.
1 435 962 9555
powerdrivendiesel.com
/ powerdrivendiesel - Auta a dopravní prostředky
PLEASE produce this as a kit! This is crazy!
We are going to be testing it for a bit to make sure all is good. If there is enough interest we will make it fit sure!
Todd
Socal billet makes a good kit,
I’m 100% interested in a kit as well. I’ve got two that I’d like to compound.
This kit with a 475 🔥🔥
I don't think you guys went over where you put the oil feed and drain?
If you made this kit I'd 100% be a buyer. Keeping the truck's functionality of the dual batteries in the stock locations and the factory downpipe exit is amazing
We are still in the testing stages but keep an eye out for it
As a 6.0 dork I really appreciate the recent content. Great work as always guys
Our pleasure!
Making 6.0's great again 🤔😉
You're funny
It’s always been great, just take brain cells to notice 😜
Always have been.
Keep the 6-0 content coming. As an owner of a 04, 6-0, I’m loving these vids. God bless.
More to come!
I feel like you guys are leading the industry in realistic, useable diesel performance. I know there are several great shops, but it seems at times like they are chasing big numbers only. But you guys make big numbers with relatively small air, which equates to great street trucks with minimal lag and great street manners. I feel like that is the most important thing in reality. Keep up the good work! Love the channel!!! 👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸
Thanks Paul! Big numbers certainty are fun and I love them but they aren't really practical for most people. I am having a lot fun of making good usable street power!
Todd
I've found that wetting the pipe wrap first, and then wrapping the pipes makes it easier, and it helps the wrap lay out very nice and keeps it from slipping as you go.
The bracket off the alternator is a amazing idea to package it tight 👍
Thank you Bobby
I don’t know if I’ve already commented, but I’m watching this for a second or third time. Please produce this kit! Lol
Yes please make this kit and make it affordable!!!! This is awesome
That is the plan!
This is awesome. You should do a compound on a 7.3 powerstroke. The 7.3 powerstroke really needs it
And I have a spare truck you can use to fab with
Maybe one day need to get the 6.0 off the ground 1st
Excellent job Todd
Loving the homemade under hood light
Can’t wait to pick up this kit when yall release it
I really like this id love to do something like this when I get a built 6.0 motor put in my 06
Keep innovating that’s why I love diesel platforms I got a 7.3,awesome video keep up with content
Awesome video guys! That’s a clean looking turbo kit 👌🏻
Thank you
“Okay okay now that’s way north of 500😁” for someone who’s driven 2000+hp trucks for that kit to make you smile.. Nice!
Lol! It really is still fun!
Todd
I need this for my 6.0 🤤
Is there a kit in the future? I like where this is going
Same. Instead of putting a big charger in my truck this would be sick. Depending on how the longevity of it works out
Hopefully. If testing goes well and there is enough interest we will make them!
Take my money now 😂
Love the 6.0 content, I’ll definitely be in line to purchase this as soon as y’all make it a kit!
Awesome to hear if you would like to get on our list to gauge interest give us a call!
Thank you for the update. It is something I would be interested in for my excursion.
Please let us know as we have a early release list here in the shop.
please please please make this a kit! this is the best thing ever
DAMN! Those numbers are crazy
Way more than we expected!
Just came back to rewatch the video, thanks for answering my questions on your live stream!!
Any time!
I would love to purchase this as a kit!
Cant wait till this comes outtt!
Us as well!
Great video. I would definitely consider buying one of these kits for my 05 6.0 in the future. hope to see more content with this truck 👍
Thanks, will do!
WOW!!! 620hp out of stock nozzle 175's is unbelievable!!! I am definitely looking forward to the built motor test! I have a 2005 Waggler rodded, ported aluminum headed, 800hp 1300tq street truck if you need a test truck!? That is simply amazing power with no more than what that truck has!! Great job PDD
Thank you!
I have kdd ported aluminum o ring heads stage 2 cam high output hpop billet flex plate just to name a few parts, no expense spared test truck instead
@@kxp.1496 you know what it takes then to get to our power level "safely" and you know you cant have one without the other! I have all you have listed and then some, i just didnt list the details. My heads obviously are kdd as well. I could fuel and charge mine to double the power, but where im at as a street truck is a freakin blast!!
@@kxp.1496 what transmission do you have? I am running a 2200 dpc triple disc billet stall. My transmission is a full billet 850 horsepower rated capable 5r110. Built by former Red Diomond Diesel. Several 1,000 mile trips, and daily driven like a car lol
Well skimming through the comments looks like this will be a kit. There definitely is interest in this compound kit.
Awesome video guys I've never been a newer Ford fan but what you've done with just air and a little tweaking is truly impressive i can't wait for the next faze 👍
As always take care stay safe and may God bless you always 🙋♂️🇬🇧
To much ego to admit it kicks what you drive lol
This makes me so excited about what I’d like to do with my 06 King Ranch. Love my 6.0. Thanks guys.
Anytime!
Very slick set up. Looks super clean! That's a tough engine bay to work in.
It sure was but works great so far
Considering there’s only like 1 company on the market that makes a compound kit for these, you guys definitely should make one
I was there ordering a pump rebuild when they were filming this. Sorry about taking you away from it Baron. Clean truck. Hope the run to Vegas went smooth with the compounds.
No worries! The 4bt build?
Todd
@@pddofficial Yup. My Dad is excited to play with the AFC Live. Lol
BIG OIL is needed for big power for these HEUI style Powerstrokes. Obviously Warren diesel has a kit as do others. Any chance you can do a build tutorial using twin hpop kit for big oil equaling big horsepower!? As always great content. You guys are the best!
Had intake and exhaust on one, best sounding engine.
This is baddd a.. guys love it keep up the good work
Thanks!
100% would buy for my excursion
awesome! build the King Ranch!!
Love the 6.0 content. You guys should do some videos on the 7.3!
Future plans!
This is an absolute work of art. If this kit was out there I would highly consider a compound setup
Thank you we are working on it.
I really hope to be able to pick this kit up one day
We are still in the testing stages but keep an eye out for it
That's amazing I wish I had that
Summer can’t come soon enough I want this! Haha
I'd be interested after I build my engine, whenever that happens lol. KC stage 1 with like a s475 and 155/30 injectors. Simple towing setup with some added air flow and power.
I’d be intrested in this kit for sure
We are still in the testing stages but keep an eye out for it
I’m really interested in the.kit. We have two trucks we would love to do something like this on!
Love the content!!!!! Keeep it up
Thank you! Will do
I would like to see you take a 7.3 powerstroke and see how much power you can squeeze out of it
Definitely in the future
i think just putting a modern turbo would make a difference. compound may help with the sluggish spooling up on our stock 99. I would be happy without huge numbers.
@@uliwehner A turbo and larger piping is a huge start. The stock down pipe size is pathetic.. Wakes em up alot.
All i can say is WOW! That is clean smoke free power! I can't wait to see dyno numbers with your ported heads! But for basically stock, guys you knocked it out of the park! I need a kit! Great job PDD!
Thank you we are excited to find out as well!
@@pddofficial if you need a beta tester, i gladly help!
@@208flatbedOO me too😂😂😂
I need this for a 7.3 powerstroke
I keep coming back to this video to check on any updated reply’s, cause I want it!
If you would like to leave your info or call in we do have a list going for first contact for this kit.
@@pddofficialsounds good I’ll look into it 👍
need this
Surprised Todd did have the guys put this prototype kit on the Excursion after that dyno run!!! Keep videos coming.
I don't think his wife would of liked all the R&D on it still drives everyday
Loving this 6.0 content. Why didn't you guys do this stuff before I did my build? I wasted thousands on a compound setup built by someone else that was garbage. Now i have everything else chosen and paired for compounds but running a single
I really hate hearing stories like that! Sorry we are a little slow to the Ford game. I want to do a fair bit of testing on this set before we release it. Doing some tow tests this weekend. Should have some sort video on it Instagram next week!
@@pddofficial I'm not making any promises but I may be interested in purchasing a kit. Its basically either that or different injectors. I'm looking forward to seeing how yours turns out. Good luck guys
I would definitely buy this kit
Give us a call we are making a pre-order list.
VERY Impressive!
Thank you very much!
Need this
Yes please!! I want a kit.
Stay tuned!
Very nice
Well done guys! Shes a ripper!
I think you'd do well with this in kit form.
Perhaps put together several levels of kits, one with just the turbo and piping for the guy who already has a built 6.0, and then perhaps another version that includes head studs, fuel system upgrades, and a tune, then another kit that includes everything needed to build a bone stock engine into a reliable screamer. There's definitely a market for something like this... 👌
Great ideas! We have lots of plans for the 6.0. It's actually a very fun platform when you start messing with them.
@@pddofficial They make easy power for sure, and there's a ton of them out there yet... It's just some of the weak points that need to be addressed. EGR crap, factory V.G. turbo, head studs, and so on, but I'm SURE you guys are already well aware of all that stuff.
Rock on! I'm interested to see what you come up with. 🍻
please put this on the market !!
Working on it!
That I put sensor should fit behind the ipr in the stock location for a 2003 6.0 i had to do it when another shop put the wrong year motor in a customer's rig.
Amazing
Finally a reputable builder comes out with one of these! I want one for towing, can you guys start providing egt #s??
We are towing with it this weekend. Will have some egt footage next week on our Instagram!
I saw a comment and they said they did some towing on fairly steep grades and kept around 1150 on the egts
While I'll never buy a Ford this still has some solid info for fabricating custom compounds for any truck
Same methods we use on our Cummins kits!
My 2wd shorty would love this currently 205/100s 366 have a stealth 67 that would be perfect for this kit
That would be great for it
yes yes and yes take my money that is badass set up
It really exceeded all our expectations.
Produce it, I’m in!!!
In the works stay tuned.
would definitely be interested in this as a kit!!! would pair nice with kcs2 and 205/30s
That what we are think have a truck that will have all of that
I need this
Keep the 6.0 vids coming
Planing on it they have been alot of fun!
I live in Saratoga Springs Utah just say when and I will drive my 6.0 to cedar city to get this kit 😎
Yessss!
Please make an lb7 Duramax kit like this!!! Awesome keeping everything especially the battery in the factory location
thank you, that's one of my favorite parts as well.
Hey did you guys make the kit for the compound? I would be interested in the piping in in the process of bulletproofing and I have an extra turbo laying around.
We are working on the production of the kit.
This kit needs to happen
We agree!!!!
Do a regulated return with this kit. Removes the issue of obstructed fuel filter and keeps fuel pressure more uniform across the injectors
Yes they are great!
I think I have the perfect truck for that compound set up 03 F 550 ....... I've got to get with you guys on some mods
Please manufacture these I’ll be the first one to preorder!!!
Make the kit please. This is awesome!
In the works.
Pls make this kit, I been wanting one but very few kits for the 6.0. I’ll definitely get one
We are working on it!
@@pddofficialawesome can’t wait and thanks
That's some serious power ...just wondering watt you are using for an oil cooler ..awesome job keep up the good work 👍
Stock oil cooler on this truck.
I'd 100% buy this kit.
We are still in the testing stages but keep an eye out for it
Need a 7.3 build series and top of off with a compound kit.
We like where this is going!
would be awesome if you made a set for the 99-03 7.3l. i know their would be a huge demand for it!!!!!
we have plans to build a set in the future, but we need to fine tune this 6.0 set up first.
This is really cool being under the hood and all.......How did you do the oil feed and drain lines???
The oil feed is a tee that we put in the oil pressure switch and the oil drain is in the lower pan by the starter
Truely love what you guys are doing.
Just be careful if you throw fuel at that truck, with compounds they tend to chuck rods over about the 750hp range.
Yup especially high torque at low RPM tends to bend rods. But we have to give the 6.0 credit it’s fairly stout bottom end.
I friggen love the bed plate and 4 bolt mains!
Todd
Warrens makes 1000 plus on stock bottom end
@@pddofficial they’re stout rotating assemblies for sure! It’ll handle whatever you throw at it with a set of rods
Yep. Rods are a must over 700 or so. 👍
That’s awesome, curious how well it pulls a trailer. My 6L is mostly a daily but sometimes pulls a 25’ flatbed with a skid loader or hay and would love to run this set up depending how it handles weight
Did a towing test this weekend it was great. Never had to downshift and kept egt around 1150 going up steep grades while in the max power tune! We got some footage going up on IG in the next day or 2.
@@pddofficial Sweet! 😁
Useable daily's is where it's AT with these things.
I love this concept! I am wondering if fitment would be case by case. I have many aftermarket parts i.e., intercooler pipes, external oil cooler, air filter box, etc. I just want a reliable truck but some extra power with little added weight would be awesome!
This kit would be built around stock parts for sure. Hopefully other aftermarket mods will be easy to make work also.
@@pddofficialI have been thinking about this concept. I’m wondering if you can put the turbos under the truck. You would need is a custom manifold and to route pipe under the hood. Just a thought.
Mer needs to pick back up his youtube channel haha hes great on camera and he has a ton of knowledge to teach people❤ and its fun watching the team in their more natural daily shenanigans 😂❤
please do a NBS 7.3L powerstroke!!
Can we get an update on how it’s been so far. I want to do mine and I’m willing to wait. It’s a must have
we have done a couple more tow tests, and its working amazing, I did have a factory up pipe bellow start leaking so we are waiting for new up pipe to install
Baron
Gale Banks will have a Heart attack over where you are putting the air filter, but I am sure he'd sell you guys one of his fancy Air Density Gauge setups (Boost and 2 stage IAT calculator for your dash for those that need new 'cool' stuff to talk about.)
Nice job on the 6.0 fab work. Sure you'll be getting some $ from me in the near future.
Thanks Steve!
I’d buy a kit!
Can you do a video on how you ran the oil feed and drain lines?
the oil drain line goes to the oil pan just in front of the starter. the feed line comes off the engine oil temp sensor hole where a have a T that still send oil to the sensor and sends oil to the turbo
What did you guys do for the drain and feed?
We need a follow up video!!!!
Yes we agree!