How to clean a Printer Transfer Roller
Vložit
- čas přidán 16. 07. 2018
- Symptoms of a defective Transfer Roller are: - Squealing or screeching noises - Frequent paper jams - Light print -
- Streaks or spots on the rear side of the paper -
The trasfer roller is a spongy roller responsible for pulling toner from the OPC drum and onto the paper.
If your printer is malfunctioning, you may be able to save money by troubleshooting the problem yourself instead of calling a technician. Many common problems are the result of a simple issue, such as improper positioning or dirt on the surface of the roller.
Clean the transfer roller whenever you change the toner cartridge, to keep used toner from building up and clogging the print mechanism.
For any question or suggestion leave a comment
-----------------------------------------------------------------------
email: link.accessori@libero.it
other links:
www.emmegiricambi.it/
store.hp.com/us/en/cat/printers
www.brother-usa.com/printer/#....
------------------------------------------------------------------------- - Věda a technologie
This helped fix my problem when HP's own website was useless. Thank you.
Thank you so much for a very informative video. I tried this and the printing is clean and crisp now. Thank you once again.
Very informative and saved me the cost of another printer!!
Very informative thank u hope more videos from you like this i appreciate
Thanks for the practical guidance.
Thank you so much. This has helped me understand the function more. Pax. Steven.
Very useful info, thank you
Awesome and informative video
very helpfull sir thanks
Nice tips
very helpful thx
Thank you!
Muy buen video
Very good
Very good Information
Thank you viandant5 , very cool !
Thanks a lot.
Thanks a lot!!!!!
THANK YOU
great video
Thank you
thx u. solve my problem
Very very goood
Tnx
Sir, I have a hp laser jet pro mfp m128 jn multifunctional printer. when we take a print it was light and some lines are not printed kindly give me the solution to get a good printing
Thank you! Help me to clean a Xerox Phaser 6000.
thanks you very much so so so thanks
🥰
Buen video
Well done.... Thanks...
thanks
Nice, terima kasih, sekarang saya tau permasalahan cartridge saya ternyata ada pada transfer roller yang kotor ☺️ terima kasih
Ah. Many years ago I studied Bahasa and remember Teri a Kashmiri - thank you. Thank you for reminding me.
Creepy, but useful. Thanks.
I went to print out some business cards on my xerox phaser 6022 and it did a horrible job. First time after many uses. How do I clean the sticky stuck ink off the rollers? I tried the stick another piece of paper in and it jammed immediately. Plus, if I don't have any lint free clothes, are alcohol pads ok?
You mean there is paper stuck in the transfer roller? However you cam use a normal cotton cloth. It would be better not to use alcohol
I have an HP Laserjet 451 and was told to clean the Doctor Plate with instructions due to getting streaks in the Magenta color. We did that and now I am getting Magenta all over the page. Any suggestions as to what I should do? Thanks for your help.
The doctor blade must be adjusted, set it downward so there is less toner on the roller surface
Any idea how to get the transfer roller out of the transfer assembly on a Ricoh MP C5502 without breaking it? The service guide doesn't say...
Sorry I have no manuals of that machine
Thanks for your help regarding adjustment of the Doctor Blade! That part is now working great, but now I am getting light yellow streaks horizontally across the page. Any ideas as to this problem?Your advice is very smart and helpful. Thank you!
Are the lines always at the same distance? which distance?
@@viandant5 Yes, Approximately 2.5 inches apart horizontally. I removed the Magenta and ran another cartridge and it worked fine. The problem is that cartridge is almost full of toner. I've adjusted the Doctor Blade several times.
@@dianehouseman2056 2.5 inches is the diameter of the toner roller. may be it's defective or dirty
@@viandant5 I cleaned it and it is better but still there. I think it must be damaged at this point. Thank you so much. You have been gracious and very helpful.
Would I be able to send you a photo of what it's doing? I hate to give up!
Super g
I am having a gray haze problem. I think the toner cartridge I used was not compatible, now I am trying to clean the roller but it feels like there is no end to it. The more I clean it the more I can. I have been trying to it with napkins and cotton bud. It gets worse after the printer gets warmer. How long am I supposed to clean it for? Should I use water?
you can use a cloth lightly dampened with water but you do not need to clean it perfectly. compressed air is the best. however maybe the roller is worn out
Sir , I have ricoh printer which creates small dots on paper in sequence ( . . . . ) like this, would you please help me in this matter?
My brother HL-L2365DW jams paper in the drum unit, what could be the problem ?
Check if the drum turns freely, check if there are foreign objects somewhere near the drum, check if the transfer roller is in the correct position
Good morning. I have a laserjet 4050tn and have a long light black streak up the whole middle of the paper. I cleaned the roller as this video showed and it was fine for a short time but now has returned. Is the roller the issue or can low toner create the problem?
A vertical line or horizonal line?
@@viandant5 same thing happened to me! Mine is vertical down the middle
@@mizzstarr510 I think the problem is not the transfer roller
i have ir2318 canon printer. its comming 4.5 cm intervel paches its drum or pcr ? please help
you mean a repetitive defect always in the same position at 4.5 cm each?
well done, can you also do a vedeo of how to change a transfer roller from laserjet mfp m426fdn. that would really help me
If I find that machine I'll do
hi dear sir, I have canon ir 2420 xerox machine, which print a copy very light, I have changed the drum, even though the problem is same, some of the place is 60% clear and some of the place is 30% clear full document is not at all clear. what would be the problem, kindly help me with the same. Thanking you in advance.
it could be the developer roller into the toner hopper, or the blade, or the toner too old
good evening I am a technician reseller of lexmark products I have to replace the fuser kit of the lexmark B2865 of the maintenance kit can you tell me the exact procedure for the replacement you need to reset the counter and how to do the procedure. Thanks and good job
I never change this fuser, sorry I can't help you that much. The manual says reset the printer by turning it off and on again. and if the message still appears update the firmware. I hope it helps
Use coffee filters as cloths. They are lint free
Ooooh...nice!
hello, I have an Old Laserjet 4 plus, a long time ago, this print dirt. This can repair cleaning this roller?
without checking the printer it's impossible to say but probably the problem is the toner cartridge, or the fusers
@@viandant5 I will see it. thanks, great video.
Hi Sir, I have send you our quotation about the xerox copier parts, please kindly reply to me. Thank you. We are manufacturer, if there are any problems, please let me know, we have tech for it.
Hello
I have brother HL 5450DN. I have cleaned inside my printer, changed drum and toner and it is still printing smudge. What could be the problem? How do you also take out the transfer roller out of the drum?
Appreciate any help 😀
I think the problem could be the fuser unit. You can remove the transfer roller disassembling the drum unit but if you already changed the drum unit I think it's not the problem
@@viandant5 Kind of suspect that too. I was watching your video How to remove and clean Brother Fuser Unit, can I use your instructions to clean my printer (even with a different type)?
Thanks for the reply!
@@elaisatubana9812 yes, you can
how to fix internal misfeed error on ricoh spc 250 dn printer, already checked for debris paper pieces look good....
if there is no paper in the fuser unit, may be a paper sensor near the fuser unit is broken or out of position
ok boss i will try n let u knw ...thnx 4 ur reply
Hello is the transfer roller of HP is different from brother brand
yes it's different
How do I remove the transfer roller in my Cannon Image Class MF267dw?
Sorry I have no manuals for that machine
In ML 1610 the print quality is light. I had refilled the cartridge and cleaned the transfer roller also, but same print only little improved. and while starting it gives red light error. After 10 to 15 restart it start operating. I am unable to understand the problem. Please help me
There is a fuser in that cartridge, to reset the error you have to change it. then the light print could depend on the toner cartridge
in brother DSP 7030 printing out put comes with very light and sides are dusty block Pl.
Did you check the toner cartridge? Is the toner evenly distribuited on the toner roller?
would like to know more about laser jet pro 400
The foam roller under the drum of the cartridge is the transfer roller
Hello I have this Problem
PCL XL ERROR :
Subsystem : KERNEL
Error : CurrentCursorUndefined
Operator; BeginImage
Position; 8
Can you Help me Please
may be you are trying to print a document with unsupported symbols or characters. If you have the problem only with a PDF document try to print it as image
@@viandant5 OK Thank You Bro I will Try with Image and Word doc
I have an hp colorlaserjet pro mfp m182n. I have a dot on my drum of cyan cartridge, which comes over page 4times. But after many prints I see a cyan line developing on the page so position of dot. Why does this line develops? Any solution?
The PCR charge roller discharge the electricity on the drum surface through the dot. In that zone the Aluminium substrate of the drum is not covered with the coating
@@viandant5 any solution to remove this line?
@@hathakker802 I think you have to change the drum
@@viandant5 thank you
Bonjour, j'ai des lignes horizontales sur mes impressions et j'ai une imprimante samsung xpress 430w je ne parviens pas à trouver le rouleau 😭 Seriez - vous m'aider s'il vous plaît merci.
Which type of lines0 are you sure the problem is the transfer roller? are the lines always at the same distance?
Bonjour, j'ai une kyocera ecosysMita fs1010....Le bras qui protège le drum est cassé. ... comment réparer ? Merci
If I remenber well you can remove it, it's only to protect the drum during the transport
@@viandant5 merci beaucoup pour votre réponse...thank you
Hello sir. I cleaned my drum of ML-1660, and it's getting dirty every single time again. Black spots on the exactly same place in paper all the time. What do you suggest to do?
which distance?
@@viandant5 less than 2 fingers and repeatative. also this black dots on the drum again.
@@ercouldnt whar is exact 2 fingers? It could be the circunference of the toner roller or the charge roller. Is there a defect on the drum where the black dot is?
@@viandant5 it is about 2 santimeter from dot to dot vertically. so there is 11 dots vertically and 6 horizontally per line. i can send you a picture of it sir if you want. by the way when i have cleaned the drum, i couldnt see any damage on it but tomorrow i will look at it more carefully.
@@ercouldnt That distance could be a defect on the charge roller
Thanksssssssssssssssssssssssssss
Hello. I have an hp color laserjet printer mfp m182n. I have refilled all the four toner cartridges. The printer is working fine. There is just one problem that when I print an image in grayscale the printer prints that image in yellowish black not completely black. Why does this yellowish tone develops even though I print in grayscale?
Kindly recommend some solution
The grey scale are printed using the colors, not the black. May be the yellow cartridge is defective, or cyan and magenta are low
@@viandant5 does the setting with option 'print in black and white' uses color cartridges ?
@@viandant5 I don't see that my cyan, magenta or black cartridges are low. Yellow cartridges does not seems to be defective since color prints seems good.
If there is any problem despite of these facts in yellow cartridges, what can that be. Kindly tell solution? And predict what defect can be in yellow cartridge.
@@hathakker802 Try to adjust the doctor blade of the Yellow cartridge so it prints lighter
@@viandant5 actually while refilling I had never disassembled the doctor blade and it's on the original position as it was when I bought it new. And also for other 3 cartridges I had never moved their doctor blades from their original position.
So why does this situation arise that the doctor blade need to be adjusted?
Where can we buy spare transfer units?
There are very few spare parts for transfer units. try delavamp or uninet imaging
@@viandant5 Won't same size rollers do?
@ which roller? you mean the belt?
Dear respected Sir how to bypass or reset Samsung ml 2165 Toner cartridge chip plz help me and guide with a video thankful
For what I know there is no way to reset the chip. you have to change it, it costs some dollars
What about not working at all, except only light on when switch turn on
It depends on which printer do you have. may be USB connection or wifi connection
Hello. I've made a video to show how to replace the transfer rollers on a Lexmark printer:
czcams.com/video/osFP36etcjw/video.html
"Repating spots at the same distance of circumference of the transfer roller also indicate a defective roller." is wrong. Maybe at the circumference of the drum...
Transfer roller nd drum have different circunferences
Our site on Alibaba 5146mall.en.alibaba.com
don't touch it, otherwise it doesn't work at all,,,nothing will printed,,