How to fix a Brother toner cartridge with quality problems

Shop cheapest Brother toner cartridge replacements with high quality at YB Toner:
ybtoner.com/brother/
How to fix and repair a defective Brother toner cartridge with fading, light print lines or other print defects. How to properly clean the toner roller
For any question or suggestion leave a comment
email: [e-mail]
other links:
www.emmegiricambi.it/
www.brother-usa.com/printer/#....

[@megansummers1154]

Oh my gosh, another great how to.

[@marksugarman8462]

Thanks - cleaning the blade with a piece of paper as shown got rid of white stripes I was getting. Been driving me crazy, now prints perfectly. Toner cartridge was still half full, so saved me $50 for a replacement that I didn't need yet.

[@twodogswalking840]

With your great info I just fixed my toner cartridge. It was faded right down the middle of the page. I'd already ordered another but it'll get used eventually. Thank You.

[@gbmorais93]

Wow, finally a video that actually helps.

[@dsds3968]

Excellent. Allowed me to fix a white stripe on my Brother printer which was preventing bar codes from being properly printed.

[@teminus1]

thank you so much for this!!! our printer has been leaking more and more for a while and sure enough i just had to wipe it like you instructed! amazing video!

[@brantvogel1806]

Thank you! Great video! I was thinking about buying a new printer due to the poor print quality I was experiencing. Now my prints are perfect.

[@woodrage1]

Thanks for this. I ended up taking the blade out and cleaning it that way. There was a lot of built up toner on it. That was my problem with bad prints. Now it's like new again. This will save me hundreds of dollars a year now.

[@DanBurgaud]

this website is a treasure trove of knowledge..... very helpful!

[@markmullan2498]

Good video, and he ID'd my problem of ghost printing due to dirty roller.

[@davidtritsch4532]

This is an excellent video. After cleaning the roller per this video, my printer works like brand new. Thank you very much

[@jasonk.6374]

Thank you! Using a piece of cardboard to clean the blade worked for me. Much appreciated!

[@abdulrajak9705]

I use xerox m225dw.. and the catridge as same... Thank you for solution..

[@patthesoundguy]

Thank you very much! I had part of my page printing lighter... A quick swipe with a business card fixed it right up

[@wing-chungleung1461]

Thanks, the insert thin cardboard tip worked, half-used 3rd party toner saved. Subscribed. (P.S. thrown away the old original toner with scaly cracks on the roll. Sad to say that 3rd party toner works better.)

[@karlosss1868]

This fixed my problem. Thankyou soooo much!

[@DragonLord878]

This actually worked! I'm surprised the doctor blade could get contaminated this way...

[@shimonvaknin2041]

perfect. Thank you. I was able to fix the stripes in the print quality. Thanks again!

[@happydhanoa8688]

it fixed my problem thanks

[@drnoob935]

dude you are the best! my problem is fixed