How to fix ghost images (double printing) when using a printer
Vložit
- čas přidán 22. 01. 2018
- What causes ghosting when using a printer. How can you fix ghosting?
Here you’ll find troubleshooting tips to correct ghosting on prints.
Ghosting are slight images of previous print jobs that are embedded in newly printed pages, during the printing process.
This defect can be caused by several different issues: drum, toner, the fuser rollers, humidity and other scenarios.
There are several solutions for a ghosting printer. which requires little technical experience.
For any question or suggestion leave a comment.
-----------------------------------------------------------------------
email: link.accessori@libero.it
other links:
www.emmegiricambi.it/
www.samsung.com/it/consumer/pc...
store.hp.com/us/en/cat/printers
www.brother-usa.com/printer/#....
------------------------------------------------------------------------- - Věda a technologie
Thanks so much for having this posted! Still helping people 6 years later :) Our issue was actually #5 - too thick/not designed for laserjet priting
Amazing and easy to understand. My ghost print was 94+mm apart. I replaced the drum unit and it was fixed. Thank you!
Thank you for making such an extensive troubleshoot.
Seems like many helpful hints for the user to check out. Thanks for posting.
Thank you, this explained what is happening - I've never had this before. Not sure how to get access to rollers to clean them, but changing paper thickness has helped.
This is actually pretty good. The toner quality for moisture reminds me also to tell people not to use unapproved toner. The mention of dust also reminds me of making sure to empty that waste cartridge.
Thank you for this comprehensive video.
excellent to the point tutorial. please do more
Thank you for the all the information. 🙏
Excellent video. Thank you!
Many thanks, Sir its very comprehensive, more courage and hoping for more videos thanks
Very good instructional video! Very well made, to the point, clearly explained. Thanks, make more, you will increase overall quality on youtube.
Thank you!
Great video friends
great video, very informative
Thank you, helped me a lot!
Good stuff, Thanks!
Thanks for very informative video. Watching from Al Khafji Saudi Arabia
Great video thank-you
thanks, that was very helpful. Pity the scant documentation that comes with printers doesn't discuss these sorts of issues.
7rd step solved my problem.
My ghost prints were 75mm apart. the idea of replacing the fusing film unit was daunting, so I but I placed a new toner cartridge in and no more ghost prints. Hopefully it stays that way.
Great job, perhaps the most useful video about printer defects on the internet. Having trouble with my CLP-315 as it's printing ghost images (b&w and color) but the defect disappears over time. Also there is a wide blurry strip (black if printing b&w and yellow/black if printing color) that moves on every page. Next thing I could find is some toner residue on the belt in the form of a wide strip that I suppose can make the wide stripe and I have cleaned it up but the defect still persists. I'm very appreciate for some advice.
Same exact problem here! Same exact model and issue (if viewing the printed paper as portrait, my streaks go horizontally from edge to edge of the paper). My issue started when I replaced the Samsung OEM yellow toner with a 3rd-party yellow toner. I think at first I just had yellow streaks (due to yellow toner cartridge leakage), but now also have the black streak. If I print a blank page, the same streaks also occur.
I have cleaned the drum, belt, transfer roller on the rear cover, replaced the 3rd-party yellow toner with a different brand 3rd-party yellow toner. The black toner is Samsung OEM with ~25% remaining. Any help is well appreciated!
Hi, thanks for the video.
My Ricoh Copier smear toner at the right side ofevery paper I print out.
Difficult to say wihout knowing which copier do you have. May be the wiper blade, or the drum
My MFC-9130CW is ghosting on the black toner only. I already changed out the drum, still have the problem. Toner cartridges genuine Brother. The toner stays on page so probably not fuser. Tried several different paper types, same issue. Contacted Brother CS and after responding to request purchase date, serial number and page count they ghosted me. Printing text isn't too bad but bar codes like return labels are unscannable. Blew out machine with compressed air after taking out all components, had problem with false waste toner box full error but that went away.
A Brother cartridge could give ghosting problems. You should try to change toner cartridge but before the reinstallation of the new cartridge clean the drum with a soft cloth
This is a very good video.. I have a color laser printer that was repeating text every few inches but in a lighter shade, each image faded more than the previous image. I noticed that the image was well fused to the paper, so the issue was not the fuser. I created and printed my own sheet with blocks of each color, K,Y,M,C with each block surrounded by a black border. This was only printed once at the top of the sheet. When printed, ONLY the Black (K) image repeated down the page, including the black outlines of the color blocks. The 3 other colors printed only once and were well fused to the paper. Conclusion: The Black (K) Drum is bad and needs to be replaced.
btw... to make your test sheet in Paint or some other program, you need to convert RGB to CYMK. This conversion is R+G=>Y, R+B=>M, G+B=>C *** Use color values of 255 for each. Size it to fit in Portrait Mode, placed at the top of the page and Print.. this will give you a good indication where the problem is.
thank you for the suggestion
@@viandant5 I ended up having to junk the printer and get a new one. It turned out that the circuit board got cracked during our move and even though I repaired some traces and got the printer to print, it seems there's an electrical problem that is not discharging the static from the black drum. So, it's holding onto the toner and gradually reapplying it until it fades out. So, with the fact that toners and drums were getting harder to find and more expensive at that, and that mac drivers were no longer available and it was at least 15 years old (worked great but slowly) I scrapped it. The printer repair shop said that HP printers were the most reliable, easiest to get parts for and easiest to repair. So, I got an HP M182 color laser. It's fast, prints well, takes up to 14" paper and supplies are a lot less expensive, it's wireless AIO. Higher end models have duplex printing, but we don't need that. So, very pleased with it so far.. AND it came with full sized toner cartridges.. Highly recommend if you're looking..
Thanks!
I really thank you for the help you give me!
I have a problem with my Brother MFC-9340CDW printer while printing colors. Some of the colors will print slightly after where it is supposed to, (the yellow color prints slightly down from where the other colors print. Can you please help me. I tried changing the toner cartridges already and resetting, and calibrating.
If the problem is only the yellow probably it's not a calibration problem. May be there is a deformation of the chassis or a gear problem. Check the yellow drum unit
hi. my HP m175a printer prints the first copy perfectly but the rest are faded and ghosted. I've installed new carriages and imaging drum but still have the same issue
it could be the transfer belt. check the fusers too
my brother 2270dw is ghosting, when printing i open the back cover i look at the upper fuser surface /heater roller accour lots of small bubble when the heater light is on. is the upper fuser defect? no scratch at all
ghosting is a typicalfuser error, probably the fuser unit is defective
My Ricoh Savin C3003 ghost when printing but not copying and if I do anything full color the toner comes off when coming out as if the toner has been over heated. Could this be the fuser?
It's a typical fuser defect but it could be the toner too
How many pages does this print?
HP LaserJet Pro MFP M281cdw - Any idea why I would get ghost printing only in Word or PDF environment?
In other words, word documents ghost print, but printer test pages are clear as a bell.
It's strange, I can only suggest to reinstall the printer driver
Can you help me for my canon image class MF635Cx. Ghosting problem always occur.Any idea please
The informations of this video will work on your printer
I’m getting a ghost print on the first or second print then it’s a perfect print what is the issue thanks
Without knowing which is you printer it's difficult to say. may be the toner powder is damp or too old
I appreciate this as it is giving me new ways to figure out why my papers are coming up with ghosting. However.... 7rd Step? Really?
They are the 7 causes that could cause the problem
🤭🤣
Hi i have the same Problem of ghosting in my Samsung m2022.
I bought a new cartridge and i continue to have the same problem. Is my drum problem?
No, probably the fusers
yes!
On Xerox or Samsung clean the transfer roller (its that sponge roller ) ,use isopropic alchool .
in laser printer 1566 or 1600dn printer the the toner would not bonding and result is smudge if i rubbed the page
Fuser problem, probably best to try and clean it and if that doesn't work, get a new printer.
if the problem is in the film fuser what can i do to it ? change it or the problem is in the heat reistance ?
my printer: Canon IR 2420
if the fuser sleeve surface is ok, the problem is the heather
Very Informative. Very Helpful. Thank you very Much. My Printer is Canon Imagecalss 4720w. My Printer Roller pulls/grabsn multiple papers & jamming while printing, but no problem while feeding one paper only. Pls let me know how to fix it. Thanks again. Best regards.
Try to clean the paper pick up roller with alcohol. Try to change paper, may be it's damp.
@@viandant5 Good Morning. Thanks for your Helpful Feedback. Have a Nice Day.
I have changed a new opc drum, but the problem still exist.
What shoud I do next? My ghosting is regular pattern as distance same as drum circumference.
It depends on which printer fo you have
@@viandant5 Mine is Ricoh 210
@@NickyDIY101 Did you change the drum or the cartridge?
@@viandant5 I changed only a drum (the green cylinder)
@@NickyDIY101 It could be an issue with the fusers, or the toner powder is too old or damp
my rocoh spc 250 gives overlap color, i changed bit still the same problem yellow color is in background of black color
it could be a problem related to the drum unit but without checking the printer it's difficult to say. try some calibration procedures
When I print with lots of black, I see white spots on the print that ghosts the other part of the paper, is it related to this? But when I print normal document, it works fine, it just happens when I print image with lots of black part
Which orinter? May be the transfer roller
@@viandant5 Brother HL-L5100DN, when I just print normal documents it works fine
@@janinea601 It could be the toner cartridge, too old, defective or near the end of the cycle
@@viandant5 thank you so much! This is very helpful
I have the same problem, when i print brother print test page, the big ABC is ghosting, the other small font and lines, dark small square are not ghosting. what probably defect and need to be replaced? my 2270dw already print 46k
My xerox machine Konica Minolta Bizhub 215 print out black dirty in some part only in every first page... if i need 1 copy i alwys print 2 copy first one for dustbin.. lots of wastig paper.. cn you help on that??
check the fusers, or clean the inside of the printer
www.amazon.com/Compatible-Cartridge-Replacement-Laserjet-Pro/dp/B07MLB2KHY/ref=sr_1_4?ie=UTF8&qid=1549185016&sr=8-4&keywords=CF294X
i bought the the new ink for the printer, is an HP officejet J4580 All-in-one, and i did all what the printer asked me for alline the ink.
the try for alline the ink is perfect, no ghosting letters, but when i started to print a document the problem appeard, and still give me the problem, i don't know what to do :/
i'm sorry if is not clear, english is not my first lenguage, i'm italian, so if you know what to do could be nice if you can help me
have a nice day
this video is related to toner cartridges, it's useless with inkjet printers.try to clean the print-head of the cartridge with a wet cloth. in this channel there is a video on how to clean a print-head, I think it's a problem of a dirty or damaged print-head
Help. I am experiencing shadow printing on my print outs: the original script is not affected. It only affects my 'written' work and not anything which has been copied and pasted onto the same page. It seems to have started after copying some text off of the internet. Many thanks: I am trying to write up and print out my family history!
which is the printer without watching the printer, it's difficult to say. May be the fusers or the drum
The only difference I can think between copy-pasted written work and the rest of it is either based on position on the page, or that maybe the typed text is printed in black ink and the rest of the graphics/drawn/copy-pasted stuff is printed as a graphic and using colour inks (combining all colours to get any black/almost-black colours needed there). You could test that idea by telling the printer to print only using black ink and do a black and white version of your printouts, or you can test the position hypothesis by moving things around on the page to switch them around (unless you've already done that accidentally or on purpose and ruled it out). I can't help beyond this, you should probably call a professional - unless anyone else here can help given more info.
Hello. I have an hp colorlaserjet pro mfp m182n which uses original hp 216a cartridges. now I want to replace my cartridges but hp203a cartridges is available at store. I want to ask you that can I use hp 203a replacement cartridge instead of hp 216a. Because both cartridges actually look the same
The chip is different, it will not work
@@viandant5 I will replace the older chip, will it work then?
@@hathakker802 There are tabs, at least in the original cartridges. May be the compatible cartridges are the same
@@viandant5 so can I use china-made unoriginal hp203a cartridge with my old chip in place of my original hp 216a cartridge?
@@hathakker802 Some type may works, other type not, it depends on the producer
I changed the toner powder in my Brother laser jet and now I get toner on the paper edges when printing. I cleaned the drum and it went away for one print, then returned. The roller is heavily coated with powder all the time and I see powder on the wiper, even after I clean it off.
Is this due to cheap toner powder?
Did you refill the cartridge or is it a compatible new cartridge?
@@viandant5 I refilled the original Brother cartridge with toner from ebay.
@@riverraisin1 Did you remove all the old toner from the cartridge? It could be the problem
@@viandant5 No, I didn't remove the old toner. I guess you can't mix them?
Thank you for your help.
@@riverraisin1 It's important to remove all the old toner
because I only use the laser printer for like once every 2 months or so, I guess the damp or air-exposed toner could simply be too damp to work properly sometimes, and what you need to do is print like 10-20 pages to dump the toner as well as clean the drums? LET THE PAPER DO THE JOB, and don't freak out if for some reason you opened up the imaging drum and try to clean it, maybe the towel is a little dirty or you touched a bit with your hand and not realizing it, when you install it its like the whole smear of it just made it worse like it doesn't print anything anymore so you think you fucked up big time(just redo the cleaning it with IPA and let it dry, remaining few dust is ok, but there are still ghosting, thanks to the damp/weathered toner)
this idea kind of works, but I've never seen it, I just applied what I kind of know from using fountain pen and previously refilled inkjet cartridges continuously, but on the partial reverse as the ink is dry powder; You have to use the machine and keep the ink going in order to maintain it.
You forgot to mention cause of ghosting picture is PCR (primary charge roller) which is in contact with OPC drum and discharging remaining charge on OPC from last page.
PCR Works on 1500V and if the HVPS (high voltage power supply) fail the PCR has no proper voltage to discharge OPC drum and ghosting appears.
please i need your help i have 7845 xerox machine comes with an error replace black toner in spite of its already replaced then grinding noise appeared
It could have mechanical problems. There is a chip, no reset procedures
@@viandant5 may this be caused due to damaged drum cartridge ??
@@heshammostafa6770 Probably not, may be a gear in the toner cartridge
@@viandant5 thanks for you time ,but i replaced it with new one and still same error exists
Sometime a ghost image is forming before the image and after! for this situation how will I do? Cause the remark is that, for the first photocopy of a document I observe about this problem.
you mean the ghost image is always present? probably the fusers
@@viandant5 After completely clean cartridge bloc, drum bloc and fusers the problem is still present. In this case am I have to change fusers?
@@yvannzeunou2932 it's useless to clean a damaged fuser. I think you have to change it
@@viandant5 All right! I will do that!
thank you for what you do for us.
@@viandant5 You mean replace the printer. Isn't it too much trouble/ expense to change a fuser?
Hello I have an hp colorlaserjet mfp m182n, I see a magenta lining on my pcr and drum of magenta cartridge. I have cleaned that lining but after few prints it again develops. Is this some sort of defect? Why does this occur? Drum has no scratch
Does the toner roller is defective? Does the printed sheet is ok?
@@viandant5 toner roller is ok. Lining occurs on printed sheet
@@hathakker802 Does the lines repeat at a specific distance?
@@viandant5 yes
@@hathakker802 which distance?
Does the damaged drum cartridge cause grinding noise during printing??
yes it could
grinding noise are the gears OR what they are driving by.
Hi, I have a HP CP1515n colour laser. The cyan wasnt printing (the image on the paper had magenta, yellow,and black ok, but no blue), even though the cartridge was not showing as empty. .I swapped out the cyan cartridge, and now the image is solid blue over the entire page,(you can see the actual image in the background) What could be wrong?Thank you
You swapped out, you mean you install another cyan cartridge?
@@viandant5 yes,bought and install new cartridge.
@@drrobfalconer It's strange, it seems you have two defective cartridges. It could be a bad contact between the cartridge and the printer
@@viandant5 Thank you for your suggestion. Is there a way to test the cartridges' electrical circuitry?
@@viandant5 Update: I swapped the blue cartridge for the yellow cartridge ( after swapping their identity chips), so now the cyan cartridge is in the yellow slot, and vice versa. Now the prints come out with 100% yellow coverage. There must be a printer fault related to that cyan cartridge slot .
thanks, my problem is that previous prints will show as a shadow on the next print job just at the lower end of the page. It is related to this?
yes, this video is related to this
Same problem is mine
@@viandant5 what should I do?
@@syedakazmi5707 You have to follow the suggestions of this video
When I print on 65lb card stock, it double prints. Works fine with 32lb paper. Didnt have this issue before with the 65lb paper
MAy be the fusers are worn, or may be your printer is not suitable for cardboard
Thank I How to solve paper jam when fuser is fine
Am also need the same topic
Hello, I have an hp colorlaserjet pro mfp m182n printer, and I refills it's cartridges, but the reset chip is unavailable in my country. Now can you tell me that up to how many pages will my printer yield till its chip restricts it to print.till now I have printed approx. 2500pages/ cartridge.
I have also set supplies settings to not be stored on supplies by using advanced settings in computer.
Also Do you have any solution for this
Which printer?
@@viandant5 hp colorlaserjet pro mfp m182n
@@hathakker802 You can continue printing if you set the machine on "continue Yes"but you'll have a error message every time you launch a print
@@viandant5 will there be any sort of locking system if I keep on printing like that. If yes, what will be the solution then?
@@hathakker802 check in the printer folder or in the printer menu display an option like "print continue Y/N"
I have a Richo MP2501 printer but it prints a fait text
Any solution for that problem.
fait text what do you mean?
when you command a print out it comes out when its faint
I own a MFC 260C printer and have ghosting on my printed sheets. What do l do ?
Brother MFC? Is it an inkjet?
Yes it is
@@keithedwards4777 A ghosting in an inkjet printer is strange. which is the distance between the images?
@@viandant5 sorry, not an inkjet, l have been told it may be the drum, needs cleaning with a lint cloth, but not sure how to remove the drum
@@keithedwards4777 the problem could be the fuser unit. cleaning the drum could not solve the problem if the drum is defective or worn or too old
It is to ask you that my hp laserjet printer prints text very well. But when I print images the image is printed half faded starting from middle till bottom. Kindly tell the solutions.
Difficult to say without knowing which printer do you have. Probably the problem is the toner cartridge
@@viandant5 I am using hp colorlaserjet pro mfp m182n, I recently filled black cartridge like other of my color cartridges. The color cartridges works fine but the black one works fine only till start of page and then prints faded image down the bottom of the page. The toner is of same quality. I checked the opc drum and developer roller, they are fine, I hope so the problem is in toner part of the cartridge, can you kindly figure that out
@@hathakker802 I think you have to adjust the blade of the toner roller. if it's too near the roller, the toner on the roller is low
Do you mean I need to adjust doctor blade ?
@@hathakker802 yes the doctor blade
Luckily my ghosting issue got fixed by a new cartridge. Samsung M2070W.
Hl l5100dn ghostigmng problem when printing high black image. Only half is printed and the other half is ghosting the upper half
I think it's a fuser problem, but the toner cartridge could have problems too. Try to change the toner cartridge
Hi, did you found the problem? I also have the same printer and when printing high black image I see white spots and some ghosting in other parts
@@janinea601 It's a typical fuser problem but it could be a defective or near the end of the life toner cartridge
@@viandant5 if it’s a fuser problem does it mean that I may need to buy new printer?
@@janinea601 I think you have to contact a repair centre and ask them the cost
how can i find the heat fuser in a hp mfp m477fdw
where to buy it? try with a search engine
No. How to find a heat fuser IN a hp mfp, not FOR a hp mfp. That means WHERE in the printer is the fuser and how to clean, inspect or remove it.
@@viandant5 I would like to know the answer to this Q. I have a HP similar model and am trying to locate the fuser because of ghost printing on my pages
@@jayjacome358 The fusers are the rollers in the back of the printer. You can see them opening the rear cover
If we used old or use tonner powder to refill than old shadow appear
you mean the old toner powder in the waste section?
@@viandant5 yes
Respected sir,
I have samsung k2200 printer .After change drum image are not develop in print out in a paper. But text are clear. Please give any solution sir please.
have you tried to print another type of document? is the èrpbòem onòy related to color?
@@viandant5 thanks you sir.....
Strange, I thought I posted a comment but I don't see it.. Anyway great video!
My Xerox phaser 6000 ghosts and smudges a bit, but only one side. The rollers are clean, not worn and seem to provide enough pressure on both sides. Two sensors on the fuser are clean and both give the same electric resistance. I can't figure out what the problem is here.. Any ideas? Thanks!
It could be the drum, or a toner roller or the toner roller blade worn, or the toner too old or damp. Try to remove all the old toner
I have a LaserJet 2200dn.
I see ghosting of my text as outlined in Step 3 at 1:09 in the video.
My ghosting is exactly 94 mm apart as outlined at 1:20 in the video.
1:20 appears to show a page from the HP LaserJet 220dn manual.
I know the optical drum on my ink cartridge is the problem, not the fuser, becasue the problem is on the page before it reaches the fuser.
The ink is steadfast on the page after printing and cannot be smudged indicating the fuser is doing it's job properly.
The toner cartridge is new and is original HP manufactured.
The optical drum is constantly coated in ink particles, and I don't think it should be.
When I carefully clean the drum, no sooner have it cleaned it than it is covered in ink particles again.
I have run the printer cleaning cycle a few times by pressing and holding the Go button for 15 secs or so, and releasing it.
This has helped a bit, but the ghosting is still there.
Any ideas?
(I opened up my reserve new original HP cartridge, out of the box, and tried it as well.
It produces lots of smudging, not ghosting, and again the toner is everywhere.)
I think the wiper blade of the drum is old and defective. It's an old machine, the toner cartridge could be exipred
@@viandant5 is the wiper blade inside the toner cartridge on this model?
@@ksmith7122 yes
@@viandant5 I'm going to try one more new toner cartridge with this printer and if that fails get another printer.
This HP LaserJet 2200dn has been a great printer, very reliable and cheap to run.
Can you recommend something similar, a good printer model that does double sided. The used market is Ok for me.
Thanks
@@ksmith7122 The HP old printers were best than the news one but it dependes on which operative system do you have, The new printers don't accept old printers like the HP 2200
7rd step? Hehehe
I have the same problem. I clean all, but it's still doing ghost print
the cleaning does not solve the problem if the fuser roller is worn.
@@viandant5 How can one tell if the fuser roller is worn? There's mention at the end of the video to clean the black roller w/ a damp cloth, so I'll give that a try, but curious about this worn business. Thanks.
@@wcw8316 Often is enought to look at the fuser rollers. If they looks dirty or the surface is uneven, probably you need to change it
Ciao e complimenti di cuore per i video! mi scervello da una settimana con una Samsung CLP 315, ho la riga orizzontale nera abbastanza random e talvolta il ghosting delle pagine precedenti,specie quando viene usato molto colore; la cartuccia del nero non è originale e risulta un po' più dura delle altre...chi è l'indiziato secondo te? :)
Ci potrebbe essere un contatto da qualche parte che non funziona bene, oppure secondo me potrebbe essere il tamburo consumato o con un piccolo difetto che "scarica" creando una linea nera random
@@viandant5 che faccio? Verifico e uso il contact spray sull'asse che tiene fermo il tamburo?..potrebbero essere le lame di pulizia del tamburo e/o transfer belt?...i numeri del report non mi sembrano così alti:(consumables life) fuser life 6078/transfer roller life 2671/tray roller life 2725/transfer belt life 6194
@@dedoguitarman Intendevo i contatti tra la stampante e le cartucce e il tamburo. Controlla che non si siano puntini sulla superfice del tamburo, anche un piccolo puintino potrebbe causare una riga orizzontale
@@viandant5 lo smonto e controllo..non ho alcol isopropilico...posso usare denaturato mischiato ad acqua?
ho estratto il tamburo e c'era la strisciolina di toner orizzontale...considera che ho stampato diverse pagine tutte bianche
Salve. Grazie ai suoi video sono riuscito a sostituire i rulli del gruppo fusore e sembra essere andato tutto bene. Dico sembra perché la qualità delle stampe in bianco e nero sono perfette, mentre le stampe a colori (non tutte), soprattutto le foto, o elementi un po' elaborati a colori, presentano l'effetto ghosting. Da quello che dice nel video potrei pensare che il problema sia il gruppo fusore che non riesce a raggiungere per qualche motivo la temperatura ottima, ma il fatto che le stampe in bianco e nero o la gran parte degli elementi in nero non presentino questo problema mi fa pensare che il problema siano i toner a colori (che non hanno mai stampato alla grande a colori, sebbene della stessa marca compatibile del toner nero) oppure i tamburi, attualmente al 21%. Ho molti dubbi, perché in 5 anni di vita della stampante l'70-80% delle stampe effettuate è stata in bianco e nero e quindi non credo che i tamburi dei colori siano effettivamente al 20%. Ho cercato di pulire i tamburi in base alle sue indicazioni, ma non ho avuto un significativo miglioramento. Avevo pensato di procedere per esclusione per risolvere il problema, ovvero sostituire i toner color prima e poi in caso di insuccesso cambiare i tamburi. Qualsiasi indicazione da parte sua mi sarebbe d'immenso aiuto. La ringrazio anticipatamente e le auguro una bella giornata :-)
Sì ma che macchina?
@@viandant5 Salve. La stampante è una Brother MFC-9332CDW. Oggi ho sostituito i toner con quelli di un'altra marca: ho notato un miglioramento nel livello di ghosting, ma il problema rimane. Ho lasciato il toner nero della vecchia marca, perché con questo colore i risultati sono ottimali e non riscontro effetto ghosting legato a questo colore. Ho notato anche che con i nuovi toner, facendo il test colore, i colori pieni non risultano perfettamente uniformi ma se guardo da vicino sono presenti linee orizzontali dove il colore risulta più intenso. Alla fine ho fatto anche l' Halfway Test facendo entrare il foglio dal vassoio frontale e ho aperto la stampante appena il foglio è sparito dentro e ho riscontrato che i colori vengono distribuiti uniformemente e non è presente il ghosting, e quindi ne deduco che il problema è il gruppo fusore. Sono sicuro di aver montato il kit fusorein modo impeccabile (due rulli, superiore e inferiore) in modo impeccabile e il problema potrebbe essere legato forse alla qualità dei rulli. Potrei sostituire anche i tamburi, visto che sono al 20%, ma non so se ne valga la pena nell'immediato per risolvere il problema. Forse il problema potrebbe essere il sensore che controlla la temperatura: l'ho pulito delicatamente con dell'alcool e carta scottex e forse potrebbe essere rimasta sulla sua superficie qualche microfibra vegetale che ne impedisce il corretto funzionamento o stacca il riscaldamento del rullo prima di aver raggiunto la temperatura ottimale. La cosa che non riesco a capire è com'è possibile che il ghosting si presenti solo quando stampo a colori. Se stampo in bianco e nero la stampa risulta perfetta. Confidando in qualche suo suggerimento la ringrazio anticipatamente e le auguro un buon fine settimana!
@@carlotrombetta4063 Non mi sembra siano i fusori. Credo che i tamburi dopo 5 anni potrebbero essere consumati. Anche se non stampano niente quando la macchina è in funzione lavorano comunque, consumandosi.
@@viandant5 La ringrazio molto per la risposta 🙂
I have squirrels that sit on top of my printer and eat walnuts, so that's probably my printer problem.
Toner power company name प्लीज send india number
Yes how to get the fuser in Hp laser jet pro MFP M477fdw