Samsung Dishwasher Drain Pump Replacement
Vložit
- čas přidán 24. 08. 2024
- This video provides step-by-step repair instructions for replacing the drain pump on a Samsung dishwasher. The most common reason for replacing the drain pump is the dishwasher not draining completely or leaking.
Buy part #DD81-01527A now: www.repairclini...
Additional dishwasher repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:
www.repairclini...
All of the information for this drain pump replacement video is applicable to the following brands:
Samsung
Tools needed: phillips head screwdriver, flat head screwdriver, 5/8 inch wrench, 9/64 inch hex head screwdriver, pliers
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!
Thank you! A glass cup broke and 1 decent sized piece was missing. The next wash the dishes washer wouldn't drain so we went digging and this video helped us find and disconnect the drain pump. Immediately the glass piece fell out upon removal and everything works properly now that it's all together again
Thanks so much. You saved me $300 as the tech who came to do diagnostic check told me that the drain pump needs to be replaced. I did not believe him and once he left, I googled and found your video that made be believe that locating and replacing a drain pump is so easy. I didn't have to replace it at all. When I opened it, I found a date seed in it. I removed it and OE error was gone and dishwasher started working in no time. Thanks once again!
BTW, you don't have to remove the hose and pipe or disconnect the cables if you can switch off from the main circuit breaker and your hose is long enough to bring the dishwasher out.
Thank you, thank you, thank you. I bought a new pump for $25 and did the job myself thanks to this excellent video. You saved me $hundreds!
The drain pump stopped working on my Samsung DW80J3020US. Using this video I removed the drain pump and surprise! Out popped a circular black piece of rubber. Turns out the check valve broke off and became jammed in the pump. That's one thing fixed! Excellent video. Now to watch "Samsung Dishwasher Check Valve Replacement".
Thank you, I had a piece of broken glass jammed in my pump. This was the first video I have seen showing how to pull the drain pump to see if it cleared..
Omg this video just saved us so much money!!! Found a Lego in our pump!!!!!!
Thanks for the video. I removed the pump and the spindle was broken.
why do you have to disconnect the wires if you're already turning off the dishwasher in the breaker?
to uninstall it, sometimes the wires are tight and you cant pull the machine out
Instead of replacing mine I bought some plumbers grease and put it around the seal. Did the same for the turbidity seal.
This video was exactly what I needed. Thank you. Washer works again. Kids will be pumped not to have to wash dishes anymore.
When connecting the wires to the new drain pump terminals, does it matter which wire is connected to which terminal?
Honestly I doubt it matters much cuz it’s AC current, although sometimes things are designed to be polarized for general safety so the entire item isn’t electrified when not in use (think of old lamps, if you plugged them in one way they’d have electricity running through the bulb and everything and then the connection is broken at the switch, which meant you could stick your finger in the lightbulb socket and get shocked even when it’s turned of…now they make the plugs where they’ll only plug into the wall in one direction, so that the only hot wire when the lamp is off goes to the switch and stops there)
Basically, I’d put the wires back on the way it looks in the video, but if you already finished and did it backwards I wouldn’t pull everything apart again just to swap them back 👍
Thank you for the video I ordered a part off Amazon for well I'm not going to say but it was cheaper than calling a bloody Samsung technician.
Mine is not accessible. See to be a little different in the bottom panel
Unfortunately my DW80R5060US model has the whole assembly rotated so that the pump is inaccessible through the removable panel. I suppose I will have to disassemble the entire base to reach it.
Just finding this iut now. What a joke!
what size is the o-ring around the drain pump?
Did you ever figure this out??? Ive been looking everywhere and cannot find it
do you sell parts also??I need a drain pump for a samsung dishwasher model # dw80k705oug/AA 02 or maybe atleast that part number..sew I no what too look for please
where can I buy this pump ?
like it
👍
This annoys me so much. To replace this pump, you have to:
Turn off power and water. Unhook water, power, and drain lines, mounting brackets. Slide the machine out of the wall. Rip onto face. Remove bottom plastic panel.
Now you can access the drain pump. It’s got trick connectors, that look normal, but are actually locking connectors. Then you find the hidden locking tab to rotate the drain motor off. Now you can check for obstruction, vacuum the drain line, feel the motor for issues.
Who designed this freaking washer?
On a kenmore, you remove the two screws to the toe panel and you’ve now got access to the drain motor.
Depending on the model. Kenmore has some crappy designs also.
Don't blame the designers, blame the bean counters and the consumers. Consumers won't pay more for easy to service so if it saves a $2 in manufacturing that what's they will do. Actually not that bad for something that may need service once in the appliance's lifetime.