Chase get a heat lamp to pre warm your molds, blender and injector up with so that your plastic won't cool off so fast while injecting. Also to make your plastic go further have you tried chopping or getting a cheap small food processor to really grind up your leftover harden pour tails and mixing cup cured plastic and mix it with new plastic for up to a 4 to 1 mix. I use to manufacture many different soft baits and we would use regrind as we called in in plastic a lot.
Love the vids...new sub and looking to get in to making my own plastics....your vids are BY FAR superior to the other guys making these type of vids.....keep it up bro!
Very nice. I just started making soft baits and made a two part injection mold it of plaster of paris. It kind of works but the main body part almost always had a bubble or is hollow. The mold also isn't super smooth so that transfers to the bait and they aren't shiny. I need to make some aluminum molds or vac 50 molds...
The best weedless top water bait ever made. The strike king grass frog Bill dance edition would be great since the don't make them anymore and are hard to find.
Absolutely love your video's bud! One day I want too fish Sam Rayburn and Fork. I want too punch, drag, flip and frog the light put of them! Till then I'm stuck in Ohio!
Get a hairdryer or a heat gun and preheat the mold and injector and you wont have any bad pours. I don't make soft plastics but I cast bullets and that is standard casting practice to preheat molds, ladles, etc. Anything that will rob the heat from the casting medium.
Sam dont but the essentials lol get the crystal clear......its a lot better to work with and hold the hook better.......use a medium for better durability use soft for more action......but both are a lot more durable then keitech
I have some 'real' molds on the way, but just bought an aluminum 'Creepy Crawlers' mold on eBay from the 1960s for $14 with shipping. It has a worm, scorpion, dragonfly and spider on it. Will try to catch some fish on a creepy crawlers worm and scorpion.
I got into it a while back. I have a 6" straight tail worm mold 8" curl tail worm mold 4" swimbait mold 4" curl tail grub mold 2 gallons of top grade plastic 4 pyrex cups 14 colors of flake 8 colors of pearl bait bags worm oil and heat stabilizer im in it about $900
I am just getting into it. You can start off with one or two molds off Amazon or eBay, a cheap microwave oven and some plastisol, injector and some colors / glitter pretty cheap.
Enjoyed your video, I didn't know u made baits. I do too I got about 10 molds, very addicting lol. I noticed you suck up the plastic then discharge it, why do you do that?
What kind of mold is that and where can I get it
Definitely do more of the plastic pouring vids! It's an addicting hobby for sure
Amazing color man! I am looking at get started making my own plastics this winter.
SHAD 3.5 " on waiting ! on the same colour as you made on this awesome video, thanks body huge work !
Nicely done... Great idea to past the time away this winter.
This stuffs awesome, really want to get into it! Maybe a intro/tutorial into making your own soft plastics?
Chase get a heat lamp to pre warm your molds, blender and injector up with so that your plastic won't cool off so fast while injecting. Also to make your plastic go further have you tried chopping or getting a cheap small food processor to really grind up your leftover harden pour tails and mixing cup cured plastic and mix it with new plastic for up to a 4 to 1 mix. I use to manufacture many different soft baits and we would use regrind as we called in in plastic a lot.
Love the vids...new sub and looking to get in to making my own plastics....your vids are BY FAR superior to the other guys making these type of vids.....keep it up bro!
Great video you make it look so easy. we could do with those 3.8 swim baits here in Australia
Very nice. I just started making soft baits and made a two part injection mold it of plaster of paris. It kind of works but the main body part almost always had a bubble or is hollow. The mold also isn't super smooth so that transfers to the bait and they aren't shiny. I need to make some aluminum molds or vac 50 molds...
Great lure,can u tell please where did u bought the aluminium mild for swing impact. Thank you !!
nice vid man im thinking about making my own stuff looks like fun and i can make the colors i want
Awesome video! 👍🏼
The best weedless top water bait ever made. The strike king grass frog Bill dance edition would be great since the don't make them anymore and are hard to find.
make more vids like this this is the reason im subbed to you
Great color and great video 👍😎
wow! i will learn to do it myself...thanks for sharing
They look Great
Do you still use the non aluminum molds you got from baitmold? If so, how have the held up?
How would you make the tail a different color from the actual bait?
Damn those look great.
Have you tried the supersoft plastisol? Does the regular plastisol feel and react like a keitech? They are quite squishy!
***WARNING*** May cause extreme addiction and lighten your wallet!! Awesome video man, really nice swimbait! Glad I found your channel!
I currently make crankbaits and have started to make soft plastics what color X2 dyes do you use the most... a top ten would be appreciated
Can you pour without an injector is you just want one color
If you have multiple molds can you inject more than one more at a time without needed to clean the injector?
How do these swimbait compare to the keitechs? Only saw the single mold is that mold you have a custom made one.
Is the injector a must have or can you still lures by poring the plastic in the molds ?
I would like to see those in my box lol. I wanna come make some hoss
Good stuff...thank you.
Bout how much did this cost if you don't mind me asking, and what is an absolute needed for this I have an idea but you look experienced
That's sweet man , how much did that set up roughly cost you if you don't mind me asking ? I'm very interested in doing this
Which injection mold did you use?
Where did you get that mold?
Where did you get your dual injector?
Where do you get your molds from. Thanks
What mold are you using?
where did you get that mold?
Where did you purchase the blending tool???
Awesome thank you
Do you use your home made plastic lure in saltwater
Do you think it’s cheaper to make the baits your self or to buy them?
Well done! Nice bait and video
nice mold. where you bought it?
i have a question about "GLITTER" can i use the stuff you buy off the shelf at say like wal-mart or target? help this noob out bro! THANKS!!
Chase..........bro....2???Were did you get that mold..Are you fishing lake Athens near Athens TX??
Absolutely love your video's bud! One day I want too fish Sam Rayburn and Fork. I want too punch, drag, flip and frog the light put of them! Till then I'm stuck in Ohio!
Can u make a video of u making a mold of the swimbait u made this video
Where do you get your molds at
Thank you
Where do you get the injectors and all that?
which company's mold did you use in this video???
Where do you get your color ideas from?
What kind of mold it that where do I buy it at
who made the dual injector ?
Great Video
Hey bud how much does it cost for a a set for a first time
Can you do a homemade black shade like the kiTech swim impact fat swim bait
What mold brand is that
How do get amber brown color
Where did you buy the mold
What mold is this?
Молодець.👍
if u could but a link on here for the stuff that would be really cool
good video do more like this
What's a better way to melt plastics because in the microwave it could contaminate the food
Do you sell your lures that you make
So good
Great video!! Can you add the links for the molds?
Nice job
Have you got into tubes by chance there is no videos that I can find. That color is sweet
how can i get some baits
how would you stiffen up the plastic so the bait isn't as noodly.
Make a bluegill color next please.
Hey man where did you buy your mold I need one hahaha
How much does all the molds cost
Can u make a video on how to make a mold?
Did you sell it?
Like these videos! Do you think it's overall worth it?
AW Fishing over time you might save money but you can buy a lot of baits for what I spent getting all the stuff
Get a hairdryer or a heat gun and preheat the mold and injector and you wont have any bad pours. I don't make soft plastics but I cast bullets and that is standard casting practice to preheat molds, ladles, etc. Anything that will rob the heat from the casting medium.
Hey guys, ss the essential series plastisol durable? If so, how durable would you guys say it is? Can it handle landing multiple fish?
Sam dont but the essentials lol get the crystal clear......its a lot better to work with and hold the hook better.......use a medium for better durability use soft for more action......but both are a lot more durable then keitech
I have some 'real' molds on the way, but just bought an aluminum 'Creepy Crawlers' mold on eBay from the 1960s for $14 with shipping. It has a worm, scorpion, dragonfly and spider on it. Will try to catch some fish on a creepy crawlers worm and scorpion.
Hey chase where did you get that mold?
baitmold.com i can tell by each cavity having its own fill spot. Was looking at same mold's today but they ship from oversea
thats not a do it mold, do it is shit@@edsonrodrigues8336
Where did you get that mold, have been looking for one but can't find one
Riley Bush should be at just do it molds
baitmold.com/
from license plates to swim baits. lol good video
Where do you buy the supplies to make these?
doitmolds.com
I like to see you catch some Bass on them swimbaits.
Pls make more like this
will do
What would you charge for a dozen of these
What's an estimated startup cost to do this I'm semi-retired just looking for something to do
I got into it a while back.
I have a 6" straight tail worm mold
8" curl tail worm mold
4" swimbait mold
4" curl tail grub mold
2 gallons of top grade plastic
4 pyrex cups
14 colors of flake
8 colors of pearl
bait bags
worm oil
and heat stabilizer
im in it about $900
I am just getting into it. You can start off with one or two molds off Amazon or eBay, a cheap microwave oven and some plastisol, injector and some colors / glitter pretty cheap.
I would like to see a swim bait that is Pumpkin with watermelon flake.
if you could do that, that would be great
I'm guessing you can use the dual injector for just one color?! I'm wondering, get the single or dual injector?
420redbarn... you can take the dual injector apart to do 1 color
good news (except for the cost of the dual and mixing block), thank you!
Hell yea
Where did you buy the mold?
baitmold.com/
Sweet vid where did you get the mold
baitmold.com
Where do you buy that at
baitmold.com
Enjoyed your video, I didn't know u made baits. I do too I got about 10 molds, very addicting lol. I noticed you suck up the plastic then discharge it, why do you do that?
To make sure I don't have any air in the injector
Chasin' Bass hmm, I have same injector and never had a problem, just seems like how u shoot it back in cup will introduce bubbles in plastic.
Love the color man, keep up the good work, enjoy your videos
How much
Thats a keitech! You don't fool me !
Where do I get the molds
baitmold.com ;)