How is it holding up after all this time? Also I want to use the jb weld clear weld epoxy. I didn't know this one is good for glass to since it doesn't says it, this is the original jb weld formula right that you used?
Unfortunately couldn't tell you, I sold the car some time ago now, it was all fine up until then, the job weeks that I used was technically for metals, but it seemed to work just fine for me! 👍
It is the right way of doing it but WAY to much glue and it’s just created an uneven surface so eventually with the vibration it will come off again, same process but just a thing layer of glue and job done 👍🏻
hey im having a problem where i cant seem to fit my mirror into the metal holder, ive tried every position to try and fit it in but nothing will hold onto the metal holder piece
more specifically my mirror itself fell off from the metal disk that hold it and now its super hard to put the mirror back, how do u recommend i fix this?
@@ilyrexzy Hiya, the mirror and the disc that holds the mirror on the glass are keyed so that they kind of snap in position when you twist them together, it does take some force just like when you remove the disc from the mirror!
@@MrFabeRick Thank you for your fast reply. Is yours still attached now? Reaaon im askung is that on the Internet lots people just come back off after a while.
@@bobwarner8345 ok, nice work, the one I used is a metal based two part that I had from a subwoofer magnet repair (long story), post back with your results mate 👍
@@cameramen3141 do you mean the disc that attaches to the windscreen? yeah, everything is aligned so that the mirror faces the right direction, try to align the disc the same way that it came of the car
I have literally just ordered this! Tried so many things and been unsuccessful. Feeling hopeful about this now! 👍🏼
Great video I really needed this cause it just happened to me
thanks, Kev, I didn't find a video when it happened to me, so thought I should add one just in case it might help someone else 👍
thanks bro saved me big time
You're welcome mate 👍
Do you just attach it and turn it hard? I mean mine pretty hard to turn for it to stick as I’m afraid I’ll break the windshield hmm
How is it holding up after all this time? Also I want to use the jb weld clear weld epoxy. I didn't know this one is good for glass to since it doesn't says it, this is the original jb weld formula right that you used?
Unfortunately couldn't tell you, I sold the car some time ago now, it was all fine up until then, the job weeks that I used was technically for metals, but it seemed to work just fine for me! 👍
@@MrFabeRick did u clean or scrap the old glue off first?
@@justlg3359 i didn't, but if you can you probably should, if it's easy to come off I would probably remove it!
It is the right way of doing it but WAY to much glue and it’s just created an uneven surface so eventually with the vibration it will come off again, same process but just a thing layer of glue and job done 👍🏻
Just ordered the same jb welb for my rear view mirror. Is yours still holding? Can see it's been about 6 months for you
Hi, yeah, my mirror is still holding up after all this time, so far so good! 👍
@@MrFabeRick great stuff! I'll let you know how it goes
Worked great for me. The mix is super strong and can't see it falling off again. Thanks for the video!
@@movtec1 fantastic, glad it worked out for you too mate! 👍
hey im having a problem where i cant seem to fit my mirror into the metal holder, ive tried every position to try and fit it in but nothing will hold onto the metal holder piece
more specifically my mirror itself fell off from the metal disk that hold it and now its super hard to put the mirror back, how do u recommend i fix this?
@@ilyrexzy Hiya, the mirror and the disc that holds the mirror on the glass are keyed so that they kind of snap in position when you twist them together, it does take some force just like when you remove the disc from the mirror!
Hi
Did this method of repair work as mine has fallen off exactly like yours did.?
Hi, yes, it worked a treat, I had to wait for 24hrs for it to set before I was confident in reattaching the mirror.
@@MrFabeRick Thank you for your fast reply.
Is yours still attached now? Reaaon im askung is that on the Internet lots people just come back off after a while.
@@bobwarner8345 hi, yes, mine is still attached
@@MrFabeRick I've just stuck mine but used araldite 2 part epoxy. Put it on this afternoon and will wait 2 days before trying to attach the mirror
@@bobwarner8345 ok, nice work, the one I used is a metal based two part that I had from a subwoofer magnet repair (long story), post back with your results mate 👍
Do you just attach it and turn it hard? I mean mine pretty hard to turn for it to stick as I’m afraid I’ll break the windshield hmm
Hi, do you mean after the repair? Yeah I just position it and twist it back into position 👍
Is the position of this metall holder important? Cause i just installed and if i install the mirror now, its crooked
@@cameramen3141 do you mean the disc that attaches to the windscreen? yeah, everything is aligned so that the mirror faces the right direction, try to align the disc the same way that it came of the car