RC HOT TIP - How to fit 2 x 3S Hard Case LiPos in your ARRMA car
Vložit
- čas přidán 9. 07. 2024
- RC Hot Tip Playlist: • RC HOT TIP Series
Aussie RC Playground Instagram: aussiercpla...
Aussie RC Playground Facebook page: / aussiercplayground
Intro done by Wiziquad: / wiziquad
Music purchased from: www.premiumbeat.com/
Track used for intro: Modern Logo www.premiumbeat.com/royalty_fr...
Artist: Olive Musique - Auta a dopravní prostředky
You can still use the plastic battery hold down with two 3s hard case batteries. All you do is release the clip and pull it up just enough to clear the batteries. There is enough length on the rods to keep it in place after unclipping it, and it will hold the two batteries down better than just using the straps or adding Velcro.
yes thats exactly what i do with my talion exb. and 2 - 3s lipos. a slight lopsidedness on the body but i might be able to raise the mounts up a bit but it works!
Ahhh, the simple things in life. That most of us don't know about! Thanks!
That body shell looks so cool....! Thank you.
Great tip and body shell looks beautiful. Thanks Vas.
Thanks for the battery clip removal tip. I just removed it form my kraton 6S, was just an obstacle so happy that it's gone now!
Excellent tip this is exactly what i do on my Mojave for 10S 6S+4S & 4S+4S 8S👍👊✌️
Very helpful as always, thanks 👍🏿👍🏿
Got to love all these tips Edition thank you so much very very helpful😉😁🙋♂️💪👊🤙👍👍👍
Great info as always 👍
Crazy at this point Arrma or a 3rd party doesn't make an extended battery clip would be so nice to have.
Though you can place it back on top of the battery and the metal sliders still engage, it's not as good as the intended use but it does help.
Brilliant Vas 👍👍
Thanks for this helpful tip.
Wow good to know thanks for this tip bro 🤝🏎💨💯
good stuff bro. thx for sharing
Thank you, I was so confused, I have a Kraton 6s on the way and got to watching videos i thought 1 pack per side then realized the motor and esc is on the other side no place for that 2nd pack..
Good tip ! thank you 👌
Interesting. Thanks Aussie.
Do a video on the outcast 8s on how to do the battery straps....that buckle thing is a problem for me, just bought it and haven't run it yet...thnx
Very helpful as my batterys arrive today
2 spektrum 3s hard shell battery packs fit perfectly in the holder with out removing anything.
Even on a typhon?
Thanks for the tip! Is that a special edition Outcast? I haven't seen one with silver alloy bits. Keep up the great work!
You can actually use 2 big 3S hardcase packs and keep the lip when you mod the battery tray a little bit. To modify it, just do the following:
- remove the battery tray from the car
- remove the lip. You will see that the little nose/hook that holds it in place and stops it at the top is running in a gap in the tray
- extend this gap a little further to the top as much as you need it. I just took a hobby knife and cut a little bit into the plastic on the top left and top right corners (a few millimeters). Then I tore the middle plastic piece away with pliers.
- look if the lip is now going up far enough to use your packs. If not, redo the last step
- when they fit, put your battery tray back into the truck and you are done
I personally have done this on mine and now run 2 Arrowmax 3S Hardcases (37mm height per pack) together with the lip without issues.
That would mean the metal rods would only be in their holes a couple of millimeters, so I can't see keeping the lid on all that functional. But if it works for you, then it works. 👍
@@AussieRCPlayground Well, I just measured it. In my case (2 x 37mm high packs) the rods are still 15 millimeters inside.
I mean I haven't bashed that hard yet (I am only a few packs in with my Kraton). On the other hand, it seems to still be stable, and most importantly: This mod doesn't have any negatives. You are right, if you put the lip further out, it may loose some stability, but it still we be more stable than not having it at all. And when using smaller packs it won't impact stability at all, as in that case nothing changes compared to earlier.
True. 👍 Good mod. Thanks for sharing. 😊
Thats useful even though i dont own an Arrma vehicle!You think its possible to remove the pins and put some longer ones?Or are they fixed in the plastic?
@@BASSstarlet As far as I know they are fixed, but I haven't looked further into that up until now
I've got the same batteries and I have no problem putting them in my V3 Talion bro
Can I fit 2 8000mAh 3S gens ace in my Kraton 6S? Thx
Very helpful info Vasco... 🤔🤔👍
Thank you. 🙂
Remove holder. Place batteries in. Replace holder. It will not click back into place but you can simply use the horizontal velcro strap to hold it down on top of the batteries. Simple.
Looks like you could cut that tab off and get a little more height. The strap would hold it in place ultimately. 👍👍👍
Hi Vas, great video again, could you do a vid on ESC, battery and motor over heating Why its so and what you do to fix it! cheers mate!
I'd be interested in that too
TheWheels1965 use a cooling fan or lower the size of your pinion gear
Nice 👌😊🙏🏼
Hey Vas, you going to like what I have to tell you.
Just got off the phone with my contact at Arrma in the UK, and apparently in the near future, Arrma will switch to the new DX3 Smart transmitter for the high end models that normally came with DX2E Smart, and models that came with STX2 now comes with STX3. Why is this important? Well, I just got my LHS to include a DX3 Smart for a DBXL-E 2.0 I just ordered, and while the internals are very much DX2E, it now features a foam covered wheel as well as better ergonomics. My guy at Arrma also claims that the new DX3 has better range. If they have improved the range in the same way as they have on my DX6R, it's pretty impressive. The same goes with the STX3, and the resolution of the STX3 has supposedly been improved over the STX2. So no more issues with poor dual rate adjustment etc.
Lastly, the foam steering wheel off the DX3 Smart can be retrofitted to the DX2E:)
Did your guy at ARRMA also tell you which models that will be? Maybe a new Kraton v5? 👀😉
Where’d you get body?
I need this tip thanks!
What number is that Vasco?
Hi, my problem is the body of the Typhon 6s, I cannot install up to a maximum of 68mm in height, and a maximum of 46mm in width. Should I try with duo 3s or single 6s it's hard to find. (and I wouldn't want to spend too much) Thanks. 😅
....ok but how do you use the strap
Aha , thankyou Vas I appreciate that🤜🤛👍
No worries. 👍
Thanks
I have 2 spektrum 3s hard cases and they fit no problem in my Talion V4
Yeah, it seems those are an exception to the rule. 👍
Actually, doesn't the caveat also apply to the Talion? I've tried it with the dual 3s batteries I have, which look similar to what you have. I think they hit the body as with the Typhon you mentioned.
Hmm, it looks like there's heaps of room for the packs and I believe you can adjust the height of the body too, which is something you can't do on the Typhon. I don't know, you got me curious now...
Great little tip!!! But I have to correct you ever so slightly... The new 3S 5000mAh 100C hardpacks from Spektrum actually do fit in the Typhon tray and gives you no problems with the body...
Well, those batteries aren't available in Australia, so I would never have known that. But this was just a tip or a chest to fit larger batteries, and there are hundreds of different ones out there, so hopefully it will help some people out who didn't know you can take that lid off. 😊👍
Fact: goldbatt sells 4 inch long lipos to fit customized arrmas. Save yourself the headaches lol
So 2 Spektrum 3s batts dont fit in the 6s Arrma Typhon?! WTF that is exactly what the hobby store recommended I get. Spektrum 3s two pack. Now I wont even be able to fit the body on? I need to know if anyone knows if they wont fit so I can return them fast
Apparently the Spektrum 3S batteries are slightly smaller and will fit in the tray, however, given how tall they will be on top of each other, I still doubt the body will fit. I would suggest trying it out in the store before paying for your packs.
@@AussieRCPlayground Thanks. Yeah I called Horizon and told them I bought the recommended Spektrum x2 3s lipo/charger bundle they promote for the typhon on their website and ended up calling the tech support and asked if they even fit.
@@FalcoINC I just ordered the same thing. Mine will be here Thursday. Have you had any luck with the body fitting ?
@@mikefreetage6808 I dont actually have access to the typhon yet. Its from Santa to myself lol. But I called Horizon and asked the lady if Spectrum 3s x2 lipos fit in the Typhon because that is what they sell as the power stage pack drop down menu for this car on their site. She had a tech actually go back to the warehouse and try to put the two 3s Spektrum batteries in the car and she said they couldn't even get the body back on :(
I told them they need to remove that add on for that particular arrma car or put a note somewhere that you cant run them in series with the body on. You should be able to contact them and tell them you bought the same bundle and would like to return/exchange them. I ended up buying the Smart charger and a single 6s smart battery which should fit given the dimensions of the Typhon tray.
@@mikefreetage6808 Just an update on this. Horizon basically told me I'm out of luck and that they don't accept returns on batteries. I wrote back to them saying that this is pretty crappy service since we literally ordered their recommended power pack bundle they advertise on their website for this car. Ill see if they follow up.
Can two 3s fit in the typhon ?
Since he is to busy, the answer is yes and no. Some soft case will fit stacked but two hardcase is not happening
Can I run two 3s lipos in my kraton 4s?
If you connecting them in parallel, yes. If you're connecting them in series, no. "Series" means you'll be running 6S and that won't work in a 4S car unless you've upgraded the power system to be able to handle 6S.
@@AussieRCPlayground parallel =more punch..around same run time as 4s single..
Series =lesser punch ..longer run time.🤔🤙
Are you still working with ovonic
Yes, why?
Hey vas, have a look at exocage r/c he done a video on this same thing and managed to heighten the brace for batteries with a small hack, don't remember what it was he done exactly but atleast you can still use it. The hack was in a Mojave video where he installed the keratin 8s system in it. Check it out.
Kraton**
Just watched to look at the truck
You never showed how to strap them in? Lol
There's 2 velcro straps... Pretty obvious how they strap in. 😏
Not to obvious, the directions aren’t clear and I’m running one 6S. Can you show how to strap them in. Thanks