How to Install the Delta® Classic 500 Shower Wall Set 36x36
Vložit
- čas přidán 13. 06. 2024
- Follow along as Mike and Hannah walk through how to install the Delta® Classic 500 36x36 Shower Wall Set. This video will also work for the Delta® Classic 500 32x32 and 48x34 shower wall sets. See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Drill
- Safety Glasses
- Caulk Gun
- Adhesive
-Two Tubes of Sealant
- Tape Measure
- Staple Gun
- Sill Plate Gasket
- Level
- Carpenters Square
- Shims
- Drop Cloth
- Pencil
- Utility Knife
- 3/16” Drill Bit
- Bit Holder Extension
- Driver Bit
- 1 ¼" Stainless or Zinc Plated Truss Head Screws
- Hole Saw
- 2 ½” Construction Screws
- Lumber
Steps:
0:00 Intro
2:50 Check for Plumb, Square, & Level
3:51 Install Blocking
5:35 Install Door Nailers
7:19 Dry Fit Panels
9:24 Drill Pilot Holes
14:24 Install Foam Tape
16:38 Install Fire Retardant Pad
17:51 Install Back Panel
20:42 Install Side Panels
Check out these related videos:
How to Install the Delta® Classic 500 Shower Base (36x36) - • How to Install the Del...
How to Install Shims - • How to Install Shims - Jak na to + styl
Great video, thanks for sharing.
Great demo. Thank you.
When you are measuring the height of the blocking are you measuring from the top or bottom of the sill plate?
5:15 shower mixing valve not soldered in yet and shark bite for the showerhead pipe? idk but that's asking for trouble.
What about sound insulation ?
Thin plastic shower wall with large open gaps behind shower wall.
I was wondering about that too.
I'm having trouble finding the right door for the delta 500 32x23 has 27in opening for door iv order 3 different doors and still don't have right door the bottom of the pan has the radius and you can't put a flat rail on it
In the instructions it says "It is recommended to install insulation." What kind?
How about the shower door? Which Delta product fit the Delta Classic 500 36x36 shower wall set?
My understanding is none.
my side panel is off by 1" and doesn't fit into the base- can i cut the bottom out to make it fit?
Hello Shaun. Thank you for contacting Delta Faucet Company and we are happy to help. We do not recommend cutting off the bottom to make the panel fit. With any further questions or concerns, please do not hesitate to give us a call or send us a private message. -Carrie
Why not list make thickness and width of the foam tape Who makes it would also help a lot. Thank you.
I can't find the foam tape can't you tell me where you found it at
It comes with the shower walls
It's 5/8" wide by 1/4" thick
How long should the 2x6 door nailer boards be. You didn't say it in the video.
Hello Richie, Thanks for contacting us, I'd be more than happy to assist you today. Are you needing the size of the screws to screw the flanges of the surround to the studs? -Kelley
@@deltafaucet yes I figured out the size of screws can you tell me the size of the door nailers for the 48x34 500 series. I know it is a 2x6 boad need to know length to cut them
What was the length ? To the top of the surround wall?
All he noted was how far off the bottom (5/8"), but no mention of how long (or how high it should go)... :(
@@richiestaklinski5499it is mentioned in the wall kit install. But it’s 69 1/2”
What is the purpose of the foam tape? Our plumber didn't use it.
I believe it's to prevent water from migrating up over the lip, I also used silicone
Noise or squeak noises
@@sanchezvh It still squeaks you have to tweak it yourself ,I did it and it should be done during the manufacturing process and come treated properly .
How do you find the foam tape I can't find it
The foam tape comes with the wall kit. At least ours did
can you spell "Sueplate gasket" I couldn't find it anywhere on the web. Thanks
It’s Sill Plate.
It's spelled at 2:15 of the video on the materials screen.
SO YOU DON'T ADD ANY GLUE TO SIDE PANELS
How about the shower door?
Hello Mike, Thanks for reaching out. The 36x36 Classic 500b Wall Set can be paired with the Lyndall 36 in. x 64-3/4 in. Semi-Frameless Contemporary Shower Door. Installation instructions can be found online or in the box with the product. -Kelley
@@deltafaucetI'd like to see a bifold option. I don't have room for a pivot door to open out.
@JamesB84 grab a curtain
These walls leak ,I install elevators for a living and have been for over 32 years I'm used to snapping walls together in a much more complicated fashion ...This is a very nice surround kit but the walls leak underneath where they sit over the base/pan flange even when they're secured all the way down...The entire kit is squeaky too you have to deal with it unless you know how to stop it I fixed them myself ....I will say that the base /pan is the best one that I've ever installed and I have built dozens of custom showers .The base/pan engineering is awesome ,it's solid and does not squeak like the walls ...I know exactly what manufacturing process would fix the problem and make this the best selling product on the market ,it has to be tweaked and redesigned I could do it easily...All in all it's a really good concept and decent product that needs a final manufacturing tweak....
Bob….can you list the mods? We are in the process of installing two of these assemblies.. bases are set and wall panels are dry fitted… Thamks