How To Set Turbo Waste Gate Crack Pressure On Your Can Am X3.
Vložit
- čas přidán 22. 07. 2020
- This is the process to set the waste gate crack pressure on your Can Am X3 if you're running our Alpha 1 reflash. This is the crack pressure setting you need adjust your waste gate to on your 120hp Base model X3.
Link to purchase Mityvac pump used in the video:
www.amazon.com/Mityvac-MV8510... - Auta a dopravní prostředky
need to start posting more videos !!!!!!!
Great video
What’s a turbo r factory setting at?
Hey where can i buy that pump
Are u pushing pressure or pulling vacuum?
He stresses at the beginning that it has to be pressure. Mityvac sells a vacuum/pressure pump for about $50.
Your simulating Boost (positive pressure your Turbo is generating!)
How many turns to get to 8 psi
You will need to contact your tuner. The turns from stock is not the recommended procedure for setting crack pressure. Like stated in the video, counting turns is just a good starting point. The hand pump with gauge is the only accurate way to set crack pressure.