VIAIR Onboard Air Install with Auto Revolution and Currie Enterprises

We partnered with Auto Revolution and Currie Enterprises for this instructional VIAIR Onboard Air Install video. NOTE: The installation instructions in this video are only applicable to single-compressor onboard air systems (Part Numbers: 10003, 10005, 10007, and 20001). For other OBA’s, the wiring is different. If you have installation questions, please contact our customer service team:
- Phone: [phone] from 8AM-5PM PT, Monday-Friday
- Chat: Our website’s Live Chat feature from 8AM-5PM PT, Monday-Friday
- Email: [e-mail]

[@knaharrington627]

Why not connect power to the ignition? If you left the switch on, the compressor might run the battery down when the vehicle is parked for any length of time. Good video, thank you.

[@AZQuadRunner]

You mentioned mounting the air chuck on the bumper. What hardware is needed to mount the chuck through a piece of steel like a bumper?

[@ASMRSoldier]

Will this be able to fill up to 40psi?

[@johnnygonzales7481]

How loud is it inside the Jeep when it's running?

[@ke0kie]

For Jeep owners that like to use their cargo area, do you offer a tank mounting solution on the outside or underside of the Jeep?

[@MattCProductions]

I have seen people mount the tank under the jeep, but Im not sure if their tank was this big.

[@anicetopontillas8121]

I installed my air compressor in my 2009 Jeep JK engine bay, tank in the rear. All the wiring according to specs except the on/off connected to my rocker switch and the pressure switch connected to a viair block manifold.
My air compressor runs but it comes on then off then on again. Any reason why?

[@ASDonohoe]

Air leak possibly? It is topping up

[@elijahlong9319]

Can i use power tools with this system?

[@AngelTorres-se9zf]

I have a F-350 pickup truck and plan on placing the air compressor outside under the truck along the frame rail. Would it be ideal if I run a hose for the filter into the cab to keep clean and dry, also if there is a big temp difference like cold outside and warm inside would this option create moisture in the head of the compressor? Looking forward to hearing from you guys, thank you for sharing this video.

[@VIAIRCorporation]

Remoting the filter will be ideal when installing the compressor under the truck due to dirt and water. Regarding the moisture, it will build up regardless of the temperature. The higher the temperature (like inside of a box), the more moisture the compressor will build. The good thing about running the compressor outside is it helps with the duty cycle of the compressor.

[@AngelTorres-se9zf]

@@VIAIRCorporation thank you👍

[@WolfKingJS54]

Do you need Teflon tape on the connectors?

[@SR-jz9wn]

Yes, unless it has the red stuff. They erred in the video on the quick connect to the tank. Also use lock washers on any bolts.

[@dunnoyolo2238]

Whats part # ?

[@teamonboard]

can I use this compressor for air lockers???

[@IgorSh]

You'll additionally need pressure regulator(like Viair 90150) to reduce pressure and replacement solenoid(like ARB 180103) to enable/disable lock.. and probably more fittings and lines.

[@IcarusTECH]

How loud is it?

[@arturoguerrero4514]

can air tank be installed outside

[@VIAIRCorporation]

Yes the air tank can be installed outside.

[@nlopez8294]

Wow! If your a serious off-roader... lol

[@Chris_Powell90]

You installed it Inside the vehicle .... lol 🙄

[@billykr6026]

NEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

[@Chris_Powell90]

@@billykr6026 what ???

[@billykr6026]

@@Chris_Powell90 that's probably the sound it makes mounted inside