The Best Air Cooler for the SSUPD Meshlicious?
Vložit
- čas přidán 16. 07. 2024
- Let's take a look at two more low profile air coolers and see how they stack up, and we'll also make them work at their best. The case officially supports coolers up to 73mm tall, but we'll push that a bit. What's the "best" air cooler for the Meshlicious?
As an Amazon Associate I earn commission from qualifying purchases, thank you for your support of the channel.
Tested coolers:
Scythe Big Shuriken 3 - amzn.to/3i9AiaB
ID Cooling IS-60 EVO - amzn.to/3ewDeNx
Potential Fan Upgrades:
Noctua NF-A12x25 PWM - amzn.to/3AwDgy4
Arctic P12 ARGB PST PWM 0dB, single - amzn.to/35qHeKe
Other components:
Case - SSUPD Meshlicious
Motherboard - amzn.to/3zvGTUk
CPU - amzn.to/3yPINy4
RAM - amzn.to/3doD7mg
PSU - amzn.to/3gqIHGP
Graphics Card - Nvidia RTX 3070 Founders Edition
M.2 Drive - amzn.to/35lbFkX
Extensions-
8 + 8 pin GPU - amzn.to/3gHaEcl
8+ 6 pin GPU - amzn.to/2TGiNpM
Check out Epidemic Sound if you are looking for music for your CZcams content - my personal referral link:
www.epidemicsound.com/referra...
0:00 Introduction
1:30 Form Factor Considerations
4:28 Thermal Testing
7:26 Acoustic Testing
7:55 Other Differences
9:15 Best? - Věda a technologie
Thanks for your persistence to thoroughly test each scenario for every case that comes by your work bench, many other youtubers quickly move onto the next product, its a rare dedication not seen in many, thanks man
This channel is due to blow up. You put out some of the most thorough and clear info on SFF builds on you tube. Your research is indispensable to builders, and 99.9% us of us would never go to this level of trouble ourselves to figure this stuff out.
I don't even care about air coolers. But I'm here for the content and low-fi
Really like your recent reviews, keep the good work! Thanks!
As a meshlicioius owner, huge thanks for doing all these videos!
Found your channel today! GREAT WORK!
nice video as usual. Thanks for clarifying the BS3 with regular 25mm fan. Great!
Excellent review, wish I had found your channel sooner.
My favorite thing about your content is how you continually improve. Filming, lighting, sound, etc. =)
Also, please stop making with want one, you already got me on the NR200 lol
Such good content man. Keep it up!
These Meshlicious videos are just golden to me. Thank you for making them. I would also like to see if you would Dare to get a 3.5 HDD into the Meshlicious Case build Really Curious about how that'll be.
Keep up the golden work and beautiful stuff you've been roling out.
Cheers! Well, it can fit- you need to be using a “SFF” gpu in the horizontal mode. But I think this config will be the extreme minority of users. With a vertical GPU that is a seriously difficult fit, in fact I don’t think it will fit… and for SFF external enclosures are way easier anyhow. 😎
I love to watch your videos to relax
Awesome video bro, I’ve been struggling to figure out which one to buy.
PS: Love the music
I have no idea why the YT algorithm hasn't showed me this before. I've been watching tons of M&M and Meshlicious videos lately. I happen to have one with a BS3 fitted with a MasterFan. It fits just like a glove. I had to drill the screw holes so the heads sit 1mm lower, but it was pretty painless.
For those interested in the IS-60 EVO: The Noctua L9a (AM4) backplate will work with the IS-60 EVO. From discussions in threads I've seen, the backplate assists in providing adequate mounting pressure that the screws alone against the motherboard cannot ~ ultimately aiding cooling performance due to better contact. Additionally, supposedly ID-Cooling is providing backplates for the cooler, not sure if you have contact them directly and pay the small fee for the part + shipping.
Backplate is the reason i return my id cooling IS-50 MAX. It's a good cooler, enough for ryzen 3300x but without backplate it doesn't feel sturdy like general air cooler. I get big shuriken now and have no complain even after upgrading to 5600x.
Using the Noctua backplate with my Alpenfoehn Blackridge - definitely required for proper firm contact.
I am using a beQuiet Shadow Rock LP with the stock fan in my meshlicious and it's right up against the mesh panel, though it is not pushing it out. Also running an older Intel chip, 9700K at stock speeds an dthe CPU is around 75c but it peaks to 80 sometimes. Flipped the case fans around as per your recommendation and seem to keep the CPU closer to 75 most of the time rather than 80 as per before. Can recommend that cooler for sure, it claims to be able to handle 130W tdp chips which is higher than other ones I've looked at
I bought the IS-60 thanks to your review, indeed, it is the best low profile cooler out there. I was however curious how it would perform with only the 92mm fan in cases of extremely tight cases, how well it would compete in the 45mm height category.
nice video thanks for this. will you male the same video for the new ssupd meshroom s ?
Thanks for this specific and well executed clip. I'm in the process of building my SSUPD Meshlicious S with an Asrock SONIC B760M PG, will this options of coolers fit?
Awesome video! Do you think the Scythe Big Shuriken 3 would be a strong enough air cooler for a Ryzen 7 5800x? Looking to build something similar, but with a little bit stronger of a cpu for animation and editing. Thanks!
I have a L12s with an extra slim 120mm fan on top. Panel closed even though cooler sticks out further than the case :)
actually considering about this setup but with the thermalright axp120
if you do have an intel setup I would certainly hope if you can try the heat from the i7 12700k
Do you have a recommendation for a cooler and fans for a meshlicious + 12900KF + 3080TI (founder's edition)? Or would you not go air cooler for them? I'm very interested in as quiet and stable a build as possible.
How much of an improvement would be replacing id-cooling is-60 evo 120mm fan with the one from scythe? I am building pc from an aesthetic point of view, so I like the look of scythe fan, but don't want to sacrifice performance
how about not to use two front intake fans? in this case the only fan would be the cpu cooler. Would this be enough?
Waiting for meshroom S to come
Doesn't want itx,matx/atx mobo is all i need
Maybe I'll reuse is40x v2 for it
I decided to become an open chassis enthusiast and run a Grandis 3 ARGB
Im planing to intall a 7950X on this case and my wet dream is to put an air cooler, Could it be possible?
What if you have a Ryzen 9 3900xt? I need reliable cooling options that won't break the bank.
🌼
Question after watching your full guide, will stand off mode can be done with big shuriken 3 and Noctua NF-A12x25?
It cannot. The clearance becomes too low for even a stock BS3. At that height there are a few options such as the stock AMD stealth cooler but no serious options. If you’re doing it for cable management and you have a 2 slot card I might recommend just shifting the card out and leaving the board as is, and just use that extra space in between.
what's your general recommendation on case fans, run them on PWM or static speed? (Noctua NF-A12x25)
I would go flat at 1000 RPM, ramp to 1500 RPM for heavy loads. Where that ramping begins and ends would depend on your typical usage; if gaming then I’d figure out typical gaming temps and have the case fans running harder at those temps to help the GPU out. Given the slant towards GPU power consumption in a modern gaming system, it makes more sense to index based on GPU temps with compatible software or a temp probe, but typically CPU temps are good enough.
@@MachinesMore There are very few videos out there on this topic, so thanks!
The Alpenföhn Black Ridge should fit with the new Phanteks T30.
Alpenföhn cooler, Noctua backplate, Phanteks fan, ThermalGrizzly paste. Could just be the best aircooling setup.
The T30 is 30mm thick
@@reallycarson What's the clearance for b550i strix with black ridge? I was hoping to try this setup
Don't forget custom top and rear fan mounts. They're on etsy
Nice video mate, so I presume with the '' be quiet SHADOW ROCK LP Low Profile '' 75mm total height it will be alright , maybe
Probably fine, it’s outside spec but as you have seen with the mesh there’s a lot of give.
@@MachinesMore thnaks mate !
Try to build custom loop watercooled Ryzen 9 5950x + RTX 3090 system in this case(use 2× 280mm radiator, one front and one in side panel). I think its possible.
Yeah, it is provided you can side mount a 240 or 280, I’ve seen it done before!
Are these done without a stand off mod? (Sorry new to SSUD Mesh platform)
Yeah- the standoffs would reduce the height clearance quite a bit for air coolers.
Would I be able to stream 4k while playing games with this build?
Probably OK as long as you use the NVENC encoder! 4K30 I’m assuming.
Stop making these videos! No one is putting an air cooler in a meshlicious 🤣 If you want to help people out and give some good information, compare some AIO ideas and testing... it’s 2021 not 2012
Imagine liking your own comment
Well that was harsh. Guess I'm a "no one". *looks over at air cooler in meshlicious*
@@randutch3860 there’s a register for people like you
I'm gonna be a rare person once I put one in it ig
Will any of these air coolers adequately cool a 5900x? @machinesandmore
ID-Cooling has released a backplate for this cooler: j-hackcompany.com/?product=id-cooling-backplate-for-is-47k
Still no word if they'll re-release these coolers with the backplate and J-Hack said you have to contact ID Cooling if you're outside of the US to get one: smallformfactor.net/forum/threads/id-cooling-is-47k-47mm-6-heatpipe-cooler-with-92x15mm-fan-black-ridge-alternative.13754/post-247605
I have yet to see the backplate in Taobao and Asian market so I guess it's still in the process of mass production.