theBreadboard
theBreadboard
  • 335
  • 7 441 792
Martin Jerry MJ-S01 simple flashing with Tasmota
I needed to upgrade the wifes sewing room lights etc with automation but also sporting manual override, + NO INTERNET required, Martin Jerry WIFI switches are ideal as they can easily be reprogramed with a web browser, extreamly simple soldering and a USB to serial com converter that can be got for under 20 bucks.
Result is a system that can easily be integrated with HASS (Home Automation Service) and still allows Alexa, Google and manual operation.
zhlédnutí: 2 574

Video

Tronxy Gemini S Part 4 of 4, First Print timelapse.
zhlédnutí 1,9KPřed 2 lety
Tronxy Gemini S Part 4 of 4, First Print timelapse.
Tronxy Gemini S Part 3 First Print and Initial Thoughts
zhlédnutí 2,7KPřed 2 lety
Tronxy Gemini S Part 3 First Print and Initial Thoughts
Tronxy Gemini S Part 2 of 4, bed leveling and alignment
zhlédnutí 1,3KPřed 2 lety
Tronxy Gemini S Part 2 of 4, bed leveling and alignment
Tronxy Gemini S IDEX 3D Printer Assembly and Setup
zhlédnutí 2,9KPřed 2 lety
Tronxy provided me with one of their new 3D printers, this is an Independent Dual EXtruder model so it has 3 hot ends. Very cool Part 1 of 4
Kaiweets Km601 10000 count, first look and detailed test
zhlédnutí 14KPřed 2 lety
Kaiweets kindly sent me one of their new handheld DMM's to review, so here is a detailed look and test of it for you to see how well it performs. Good choice for Home and hobby use for sure, not really for industrial though (IMHO). if you would like one, here are the following ways to get yours kaiweets.com/products/kaiweets-km601-digital-multimeter For other Kaiweets products on Amazon see .CO...
Raspberry Pi Pico Programing Sensor Kit
zhlédnutí 4,9KPřed 2 lety
GeeekPi was kind enough to send me this kit to play with and share with my viewers, its contents are pretty typical of kits but the quality seems to be better and everything is ready to go with no soldering required. The breadboard seems to be top quality and overall the review was flawless so far. I will be executing some demos over the next while and share more of my findings as part of Ardui...
PI 4 Portable, the Sunfounder Raspad 3
zhlédnutí 692Před 2 lety
Sunfounder Raspad 3 is a portable case and display unit providing a 10.1" 1280x800 IPS display with touch, rechargable batteries, Sterio Speakers and additional USB3 ports. Just add Raspberry PI 4. In this video I have a detailed look at the product and show detailed assembly and finally some use cases for it. More from Sunfounder www.sunfounder.com/ More about Raspad 3 raspad.com/ including DO...
Arduino Programming - Electrochromic Displays ...PT2
zhlédnutí 1,3KPřed 3 lety
How to custom program Electrochromic Displays with the Arduino UNO In the previous video we looked at ynvisibles electrochromic display panels and tried out their demo interfaces and code, in this video I want to show you how easy it is to directly program them yourself with simple code. I have taken the LED code from my earlier video and modified it for these displays, I also show how to optim...
Ynvisible Electrochromic Displays Ultra Low Power...PT1
zhlédnutí 1,3KPřed 3 lety
I wanted to save power over LED displays and came across ynvisible' s line of electrochromic displays, these are not your off the shelf displays as there currently made to order but I have suggested to them that maybe they should create some standard displays and sell them as a line, this way people can get to use them without needing thousands to get a good price. They use perhaps 1 microwatt ...
Arduino Tutorial - 7 segment LEDs and more
zhlédnutí 1,1KPřed 3 lety
Continuing the tutorial series, we proceed to using more advanced LEDs from a single LED to 7 Segment and multidigit LEDs. I also tease the next video using ultra low power display like the LED but less than a micro Watt per CM2 of display, and also matrix LED displays. Code etc will be posted in the next couple of days
Kywoo3D Tycoon Kit Build and first print
zhlédnutí 4,3KPřed 3 lety
Coupon Codes and links below, check them out. Current pricing includes shipping from China, I got this note from KyWoo "the actual price for the tycoon is $469 USD with free shipping from our GE/US/CA warehouse, no tax charged". The price in the video was CDN$ (Canada Dollars ). Tycoon Direct Drive DIY 3D Printer Kit with BL-Touch Auto leveling, TMC2209 Silent Steppers, 240*240*230mm print area...
Raspberry PI 400, Visual Studio Code, Arduino IDE
zhlédnutí 7KPřed 3 lety
Quick look inside the PI 400 then how to install Visual Studio Code and Arduino IDE onto the Raspberry PI 400, Not all Arduino installs are created equal, you want the latest so dont do this "apt install arduino" How to import Arduino Sketch into PlatformIO / Visual Studio Code and some gotcha's Case sensitivity can cause migraines .....
Elegoo Smart car V4 assembly and Initial test
zhlédnutí 8KPřed 3 lety
Elegoo was kind enough to send me an update to their Smart Car V3, in this case the V4. The new car adds a camera (WIFI attached to a cell phone app via an ESP32), this also allows control of the car via serial and the WIFI. the car also has a few enhanced components like an IMU (Inertial Measurement Unit for closed loop control of Driving Straight :) (See more on that in video 2), the motor co...
Innovative case for Raspberry Pi, MaticBox.
zhlédnutí 1,1KPřed 3 lety
LeapMatic sent me some MaticBox cases for Raspberry PI 1, 2, 3 and 4, they have many mounting options including Top Hat DIN Rail or can be used just on a deck. they also support an internal 2507 5V fan and allow for small heatsink on the PI, here is a link to their site leapmatic.com/ to get yours from Amazon USA PI 3 amzn.to/3bQgqFZ PI 4 amzn.to/2ZZpwe9 Amazon Canada PI 3 amzn.to/2NFew3h
3D Printer custom PID and Marlin 2.0.7 PT2
zhlédnutí 1,8KPřed 3 lety
3D Printer custom PID and Marlin 2.0.7 PT2
3D Printer custom PID and Marlin 2.0.7 PT1
zhlédnutí 2KPřed 3 lety
3D Printer custom PID and Marlin 2.0.7 PT1
Ender 3/5 32bit controller upgrade
zhlédnutí 1,9KPřed 3 lety
Ender 3/5 32bit controller upgrade
Entry Level Clamp Meter, Kaiweets HT200B
zhlédnutí 1,7KPřed 3 lety
Entry Level Clamp Meter, Kaiweets HT200B
1.8" power house Ryzen 1000 based SBC, the GHF51 from DFI
zhlédnutí 3,8KPřed 3 lety
1.8" power house Ryzen 1000 based SBC, the GHF51 from DFI
Vankyo Matrixpad S10 for Home Automation ?
zhlédnutí 1KPřed 3 lety
Vankyo Matrixpad S10 for Home Automation ?
Home LAB for Students equipment PT 2
zhlédnutí 1,1KPřed 3 lety
Home LAB for Students equipment PT 2
Home Electronics Lab for Students PT1
zhlédnutí 2,8KPřed 3 lety
Home Electronics Lab for Students PT1
Elegoo Mars Pro, First Resin Printer for me...
zhlédnutí 1KPřed 3 lety
Elegoo Mars Pro, First Resin Printer for me...
FPV Goggles, Eachine EV300D and a few words of insight!
zhlédnutí 2,9KPřed 3 lety
FPV Goggles, Eachine EV300D and a few words of insight!
HeimVision HM311 3rd party apps, security camera review pt2
zhlédnutí 6KPřed 4 lety
HeimVision HM311 3rd party apps, security camera review pt2
HeimVision HM311 3Mpix security camera review
zhlédnutí 12KPřed 4 lety
HeimVision HM311 3Mpix security camera review
REYAX RYLR896 Long Range (LoRa) radio controlled by an Arduino pt2, the software...
zhlédnutí 3,3KPřed 4 lety
REYAX RYLR896 Long Range (LoRa) radio controlled by an Arduino pt2, the software...
REYAX RYLR896 Long Range (LoRa) radio controlled by an Arduino pt1
zhlédnutí 4KPřed 4 lety
REYAX RYLR896 Long Range (LoRa) radio controlled by an Arduino pt1
Arduino Power LEDS, The Hardware (Beginner)
zhlédnutí 713Před 4 lety
Arduino Power LEDS, The Hardware (Beginner)

Komentáře

  • @Elikroon
    @Elikroon Před dnem

    The moisture can dip also in water don't keep it in moisture it's gonna corode en it slightly is different by the drivers elegoo uses a different ic then Arduino

  • @frankdearr2772
    @frankdearr2772 Před 7 dny

    late, but great topic, thanks 👍

  • @HUYLE-yd2tf
    @HUYLE-yd2tf Před 12 dny

    hi ! I am using ic TPS92512 to design a led driver voltage regulator circuit The input voltage is 24Vdc I connected 7 LEDs in series, and there were 7 parallel branches I need it to operate at an output voltage of 2A for the led power block. Hope everyone can support me! I need to calculate the values ​​R1,R2,R3,R4,R5,R7

  • @supreetyadav5021
    @supreetyadav5021 Před 24 dny

    A version of this with hall effect current sensor would be cool

  • @faersalhozn282
    @faersalhozn282 Před měsícem

    Hi I need urgent help please I want a data cable for an LVDS screen NT116WHM-N23 Connected to the comprehensive dashboard HDV56J-LT v2.0

  • @manuelacardonaacevedo4207

    Hi i have a problem, my convertor do a sound when i put more than 7v in input and Vout is equal than Vin

    • @TheBreadboardca
      @TheBreadboardca Před měsícem

      Are there any events happened before this sound appeared, has this board been working or has it always done this. the only place I can think of were a sound would come from is the coil in the actual convertor

    • @manuelacardonaacevedo4207
      @manuelacardonaacevedo4207 Před měsícem

      @@TheBreadboardca it was working really good before but we start to drecrease the Vin to study the stability in Vout and then when we try to increase Vin again it starts to do a sound abd Vout seems like being cortocircuit with Vin

    • @TheBreadboardca
      @TheBreadboardca Před měsícem

      you may also need to increase input v to 9 - 12V, 7V may be too low for this board. (From memory of over 7 years ago :) )

    • @manuelacardonaacevedo4207
      @manuelacardonaacevedo4207 Před měsícem

      @@TheBreadboardca when i put 9V it starts to sound weird and that was not happened before :c

  • @bertram-raven
    @bertram-raven Před měsícem

    For better control the delay needs replacing with a state table and elapsed time calculation. This allows for events to take place during the pause between steps.

  • @MrGarkin
    @MrGarkin Před měsícem

    aged like a milk

  • @peddersoldchap
    @peddersoldchap Před 2 měsíci

    Hi. I bought one of these volt\ammeters. I has a voltage adjustment pot, but no amperage adjustment, although in the description it said it had both and it even had pictures of the PCB showing both pots. Ironically, the voltage measurement is quite accurate but no the current. Is there any way I can increase the accuracy of the ammeter?

    • @TheBreadboardca
      @TheBreadboardca Před 2 měsíci

      often the volts range is directly measured by the CPU on the board, with a divider network of course, the adjustment will just tweak the divider ratio. The current if often measured by a small ADC external to the CPU, it is programmed by the CPU and unless your able to re-program the device is pretty much fixed. Having said that, the SHUNT (Small piece of thick wire usually ) could be adjusted by filing or soldering to its surface to adjust its value. The adc is measuring the voltage across the shunt . It is often the case were the description of a device does not match the reality of what you received. especially if there made and bought from "Overseas" at a budget price.

    • @peddersoldchap
      @peddersoldchap Před 2 měsíci

      @@TheBreadboardca Ha! Mine doesn't even have a metal shunt like the one on the video. Of course, in the pictures it has a shunt (lol). The one I have has one big 16 pin chip (unmarked) and a voltage regulator. There's a "big" R018 smd resistor near the ammeter connector, though. Could that be the "shunt"?

    • @TheBreadboardca
      @TheBreadboardca Před 2 měsíci

      @@peddersoldchap Yes, most lightly it is. it would be under 1ohm in most cases and the more current it is rated for, the lower this value would be to keep heat dissipation down, most lightly it is in the milli ohms range..

    • @peddersoldchap
      @peddersoldchap Před 2 měsíci

      @@TheBreadboardca So, if I want to adjust the ammeter, I should replace that resistor with one of a different value?

  • @Nik-qh7cq
    @Nik-qh7cq Před 2 měsíci

    Hello! You mentioned at approximately 11:20 all you need to pick the controller board is resolution, number of pins, Channels and bits and voltage supply. So if I found a board with that criteria matching but the title of the board says "Controller board kit for xxxxxx" where xxxxxx is not my display name will it work? ( My display is CLAP070WP03XG which is 40pin 8-bit 1 channel 3.3V)

  • @richreinke4918
    @richreinke4918 Před 2 měsíci

    I am way behind the times here. I appreciate your video helped a lot! the only issue i am having is the auto marlin is exporting firmware.elf and firmware.hex files instead of a .bin file? any advice?

  • @GabeDerico-hj4ke
    @GabeDerico-hj4ke Před 3 měsíci

    I want to build an all in one sorta thing, like i have a Laptop Display, a Raspberry pi 4 and hard drive, maybe like 3d print a Enclosure and design it around the screen and everything idk how to start other than get a Controller board for the screen

  • @TOM-cj4ct
    @TOM-cj4ct Před 3 měsíci

    The little sot23-6 ic is a mcp3421 from microchip

    • @TheBreadboardca
      @TheBreadboardca Před 3 měsíci

      Thank you, I appreciate the info (As will any interested viewers)

  • @DarkSoul-il1sg
    @DarkSoul-il1sg Před 3 měsíci

    Do you know where I can find someone who can help me design a custom LCD controller board for the Nintendo 3DS's screens? A million thanks if you would. Willing to pay a low budget.

  • @cncdavenz
    @cncdavenz Před 3 měsíci

    Hi Peter, My partner Jacqui has a long arm quilting machine that i have automated with Mach3 (many brownie points gained 😃) Also I have automated some of the house using Shelly and Home Assistant and love it. Cheers Dave.

    • @TheBreadboardca
      @TheBreadboardca Před 3 měsíci

      LOL, My wife Nora also has a Long Arm but I have not yet automated it, did you post details on your automation (I would love to get more points :) ). I did provide Martin Jerry switches providing zoned lighting across the sewing room (Cutting, Quilting and general sewing. And the longarm itself of course). The one rule I have to follow is, sure I can automate it but there must always be manual traditional backup for when not if things dont work lol.

  • @cncdavenz
    @cncdavenz Před 3 měsíci

    Hi Peter, I have just been gifted two of these displays and hope to integrate one into a dual rale power supply. Have lots of time now I am retired with lots of projects in mind. Thanks for your videos that are still of value many years after you made them. Cheers Dave.

    • @TheBreadboardca
      @TheBreadboardca Před 3 měsíci

      Glad there of use still after all these years, yes those displays are very easy to program for a number of cool uses. A power supply display is a good choice.

  • @jakkiryanov9859
    @jakkiryanov9859 Před 3 měsíci

    Hello, i have a Dell Precision 5520 that comes with a touch 4k Sharp IGZO screen, i have the same exact model panel but the matte non-touch revision, it passes and powers the Dell screen diagnostics test but wont show the bios or boot into an operating system. Im using a non-touch 40pin LVDS cable but i think there might be a misconfigured pinout since the 5520 was never offered with a matte non-touch screen. Do you know of a way to find the pinout for the Dell Precision 5520 motherboard?

    • @TheBreadboardca
      @TheBreadboardca Před 3 měsíci

      What you need is the exact model of the led display, the details are typically printed on the back of the display panel. With this info you can Google the details. If the display is typical then the pin out should be standard. But a 4k display will probably have at minimum 2 channel but probably more. Post the display model and make if you can't find the details and I'll have a quick search and see what I can discover for you

    • @jakkiryanov9859
      @jakkiryanov9859 Před 3 měsíci

      @@TheBreadboardca Its the Sharp LQ156D1JW33 thats the exact model but they offer both matte and non-touch, in the Thinkpad world the pinout for touch/non-touch is slightly different and Dell never offered a non-touch version of the Sharp LQ156D1JW33 but whats strange is Dell themselves used the Sharp LQ156D1JW33 to make their own custom display assembly infused behind glass where they added the touch feature to this panel themselves somehow. So i was hoping to find the pinouts so i can make the matte version work since the glossy screen hurts my eyes. Bliss computers sells the matte/glossy non touch Sharp LQ156D1JW33 and advertises it as compatible but its seems i need an LVDS cable that doesnt exist.

    • @TheBreadboardca
      @TheBreadboardca Před 3 měsíci

      @@jakkiryanov9859 As I suspected, this display has a different interface, it uses eDP not LVDS, The eDP interface allows higher transmission speeds as opposed to LVDS cables. eDP also uses less conductors on your cable design reducing space and possible cost depending on the design. Another benefit of eDP cabels is that they allow you to easily connect your source (such as a person computer) directly to an LCD. hwew is the details on panellook.com www.panelook.com/LQ156D1JW33_Sharp_15.6_LCM_overview_34287.html so an LVDS adapter will not help here, you will need one supporting eDP, so far I have not rtied any as I have not come across a display needing one. I hope it helps.

  • @johnnymotorboat8824
    @johnnymotorboat8824 Před 3 měsíci

    I know you made this a long time ago but thank you for taking the time and effort. I'm 40 years old trying to teach myself which can make difficult.

    • @TheBreadboardca
      @TheBreadboardca Před 3 měsíci

      Is there anything you need to have help with?

    • @johnnymotorboat8824
      @johnnymotorboat8824 Před 3 měsíci

      @@TheBreadboardca I think something that would make a good video, especially for beginners is component selection for precision voltage and current regulation. For me the op-amp specifications were difficult too differentiate. I've spent hours on Newark while googling slew rate and the like.

  • @intenteloencasa7322
    @intenteloencasa7322 Před 3 měsíci

    Hello, I have a problem with my Eachine ev300d. The image is cut off on the right side and below. Which changes the view to the center. But in the DVR recordings it is shown in full. How could I solve it? Beforehand thank you very much.

    • @TheBreadboardca
      @TheBreadboardca Před 3 měsíci

      if this just happened then it sounds like your eye displays ( there are two, one for each eye) have moved, maybe with the headset getting knocked or dropped etc. if the recording is ok then it shows the issue is not from the camera or transmitter end. if this is how it is from new then it maybe your eye positioning (FIT), on later use i did get the sense it was sometimes a little finicky to get optimal view.

  • @home_Grown_studio
    @home_Grown_studio Před 4 měsíci

    Friction can be simply reduced with grease or maybe a Teflon coating of sorts

  • @NavinBetamax
    @NavinBetamax Před 4 měsíci

    It's been 8 years on since this video was uploaded. None of the wise guys in the electronics world who have seen this and commented here till today has pointed out a mistake made while measuring resistance in the milli-ohm range.............Our Great Guy here is A Shunt to the actual resistance being measured , because his finger tilps are in contact with both prongs of the multimeter. !!!! So much for the electronic buffs here !

    • @TheBreadboardca
      @TheBreadboardca Před 4 měsíci

      The part about 14 mins in is were i see myself "Shunting" the Shunt resistor, considering the value of the shunt is in the milli ohms (0.025Ohms) the human body resistance is something in the kOhms (even 10K is very low for a body) will have negligible impact on the reading ( 1/Rt = 1/Shunt + 1/body ) = 1/0.025 (40) + 1/10,000 (0.0001) = 1/40.0001 = 0.0249999ohms. I hope this is self explanatory in response to your comment. Am I shunting the value... yes, significant in any way... no. if this was a resistor of several K then it will be more significant and as its value increases, the affect is more so, but as I said, in this case it is not relevant. I do appreciate your comment though and thanks for the opportunity to educate a few viewers that may have thought the same thing and just not said anything.

    • @NavinBetamax
      @NavinBetamax Před 4 měsíci

      @@TheBreadboardca Thank you for this response....all ways good to hold bare wire when taking ANY reading ( wether negligible difference in read value than the exact value ). is what is stated in your reply. So...how about measuring milli-volts just your way !!! Next...upscale and try wall outlets........Bare finger tips, Of Course !!! Education ???

    • @TheBreadboardca
      @TheBreadboardca Před 4 měsíci

      @@NavinBetamax Your twisting my words ?, measuring an un powered milli ohm resistor using your fingers to keep the wires on the probes is not at all the same as sticking your fingers in a live socket, if the person doing the measuring is not aware of basic safety etc then they should not be using the meter.

    • @NavinBetamax
      @NavinBetamax Před 4 měsíci

      No….no twisting of any words of yours by me here……Straight up you are doing it right. Please forget I ever said anything here. Peace !!!

    • @TheBreadboardca
      @TheBreadboardca Před 4 měsíci

      @@NavinBetamax No Problems

  • @masoodurrehman8562
    @masoodurrehman8562 Před 4 měsíci

    i am having an issue with my INS8335A motherboard. it only shows American Megtrends log when i energize it. what is the issue/?

  • @_lynchy_19
    @_lynchy_19 Před 4 měsíci

    great video. just wondering, i am trying to use two arduino unos as both my transmitter and receiver and currently, i am just trying to send a string between the two rylr896 modules before actually sending data from another module. But my receiver is not receiving anything and my transmitter seems to be sending a lot of garbage values instead of the string itself based on the serial monitor. I am using the voltage divider set up to drop the voltages from the RX and TX pins to 3.3V, and i am also using Software Serial. Do you have any idea of where the issue could be? Any response would be appreciated.

  • @TIANYULANGTONG
    @TIANYULANGTONG Před 4 měsíci

    THIS IS PCB800099V.9

  • @TIANYULANGTONG
    @TIANYULANGTONG Před 4 měsíci

    TEST PCB800831 AIRPLAY+MIRACAST+WIFI DISPLAY+USB VIDEO+ROTATE+WIRECAST LVDS 2CH OUT

  • @ahmedatef6203
    @ahmedatef6203 Před 5 měsíci

    I have tronoxy x5sa but Why the proximity sensor not work with me it look like didn't save the z offset can any one help me ? And can I change the frameware in this printer or no please help .

  • @lorito6995
    @lorito6995 Před 5 měsíci

    Many thanks

  • @rittol2365
    @rittol2365 Před 5 měsíci

    My ender 3 trips gfci, could this be the cause

    • @TheBreadboardca
      @TheBreadboardca Před 5 měsíci

      Yes, that defiantly could be a faulty psu, but a lack of ground would not cause it, as it is the current going through the ground that would cause the gfci to teip

  • @user-zu8oh7dt9b
    @user-zu8oh7dt9b Před 5 měsíci

    Thans and the

  • @user-zu8oh7dt9b
    @user-zu8oh7dt9b Před 5 měsíci

    Thanks for your

  • @user-zu8oh7dt9b
    @user-zu8oh7dt9b Před 5 měsíci

    Thans is the

  • @Trev619
    @Trev619 Před 6 měsíci

    My power button doesnt light up but power supply powers on no fans work beside the main one on extruder would tgis be the problem

  • @stoptheirlies
    @stoptheirlies Před 6 měsíci

    So where is the second part with the circuit etc?

  • @arjenveninga5038
    @arjenveninga5038 Před 6 měsíci

    What would be the problem if you design a corexy printer with X Y and Z axis has a ballscrew or leadscrew? all axis?

  • @CandyHam
    @CandyHam Před 6 měsíci

    thanks for posting this detailed unboxing

  • @braveheart9275
    @braveheart9275 Před 6 měsíci

    Thanks a lot , great job.

  • @user-yr4ij9hm4c
    @user-yr4ij9hm4c Před 7 měsíci

    Good day I could change the date and time stamp on the PLC. But if i cycle the power on the Unit it shows the old date. Any advice will be appreciated.

    • @TheBreadboardca
      @TheBreadboardca Před 7 měsíci

      It has been a while but it is very possible there is a command that sets the system date time, and probably a different one to set the hardware clock date and time, some newer systems will do both together but not all, I think this may be such a case. I had never tried this myself during my reviews. I hope that helps stear you in the right direction

  • @SevenDeMagnus
    @SevenDeMagnus Před 8 měsíci

    New subsscriber here.

  • @ags_1905
    @ags_1905 Před 8 měsíci

    How long do the batteries last? I imagine not too long.

    • @TheBreadboardca
      @TheBreadboardca Před 8 měsíci

      I don't use mine every day but I put in some Duracell batteries after I reviewed and am still using them now. I replaced the ones that came with it as I have more confidence in the duracells

  • @3D-Brothers
    @3D-Brothers Před 8 měsíci

    great

  • @sujaysurendra8118
    @sujaysurendra8118 Před 8 měsíci

    Hello i have a 40 pin 6 bit 2ch lcd screen, could i use a 40 pin 6 bit 1 ch lvds cable to connect it to the control board?

    • @TheBreadboardca
      @TheBreadboardca Před 8 měsíci

      You would loose some of the colors, I don't think the controller or screen tries to reconfigure to use a single Channel, you can buy just a 2 channel cable quite cheap, just make sure it has the right connector

    • @sujaysurendra8118
      @sujaysurendra8118 Před 8 měsíci

      @@TheBreadboardca Thank you for your advice

  • @thelostbouys
    @thelostbouys Před 8 měsíci

    my pizo wont STOP buzzing upon bootup!! any thoughts?

  • @billhill839
    @billhill839 Před 8 měsíci

    This board is discontinued now. If it worked ok , why stop making it?

  • @joeschmo5171
    @joeschmo5171 Před 8 měsíci

    Just discovered these today, and I am very excited to try these out. Looking to incorporate some of these units into a fun game for the kids to simulate an industrial control console complete with lights and sound.

  • @mensamoo
    @mensamoo Před 8 měsíci

    very informative thanks

  • @surenbono6063
    @surenbono6063 Před 8 měsíci

    ..is this module durable..?.. I tested hc12 ,it only lasted few day if tx'ed every sec...tx pin failure..but RX pin was working..

  • @N0remacsketch
    @N0remacsketch Před 8 měsíci

    Can someone help me out? I got a shoebox cassette player and when I turn the volume on too high it makes a loud nosie

  • @savvybuilds
    @savvybuilds Před 9 měsíci

    Thanks! I've been trying to learn the language of CNC for a future project and it hasn't been easy! This helps.

  • @wildbill4680
    @wildbill4680 Před 9 měsíci

    Fantastic demo, thank you. Can it log I/O data from sensors. If so what frequency can it log at and for how long. Many thanks.

  • @FooblyWoobly
    @FooblyWoobly Před 10 měsíci

    Nice video! Very informative. Though one correction: the N156BGE-L21 panel at 8:14 is 1366*768, not 1024*768, this can be easily seen simply by the dimensions of the panel. I've never seen a 4:3 aspect ratio 15.6" panel by the way. 15.4 are usually 16x10 and all the 15.6" ones I've come across are 16x9. If it operated at 1024*768 that is usually a sign of missing graphics drivers on the device it was connected to. I myself came to this video in search of a converter board from lvds to 2 or 4 channel mipi, which would allow a direct connection to mipi dsi interface of SBC's like the rpi4, but no luck so far!