Elegoo Mars Pro, First Resin Printer for me...
Vložit
- čas přidán 24. 09. 2020
- I have many filament printers in the lab, all reviewed previously, thought it was time to introduce a resin printer to see what all the fuss is about
This is my initial look at the Elegoo Mars Pro, this is not a sponsored video though if Elegoo wants to reach out :)
The printer was relatively easy to use even with minimal experience, hardest part was getting the correct bed zero and exposure to start, after that, plain sailing :). The example print provided did not work so I re sliced it and tried again with the right parameters for the resin and voila !
Link to Elegoo on Amazon here
.COM amzn.to/2Hrb0pu
.CA amzn.to/3hY8e7S
and if you want to go the latest Mars 2 pro
.CA amzn.to/30bbExT
,COM amzn.to/3kSNpwz
Banggood www.banggood.com/custlink/3KG...
more printers www.banggood.com/custlink/m3K...
Or direct to Elegoo www.elegoo.com/ - Věda a technologie
I did my first print and went through the same thing as you did and finally after changing the settings in chitubox it printed nice
Thanks for this video! I’m about to try my very first print on the Mars and it’s good to see someone else starting it up.
Have fun!