- 90
- 1 271 848
Fraens
Austria
Registrace 25. 07. 2015
This channel is about technical 3D printing and self-developed 3D printed machines of all kinds.
In real life, I'm a packaging machinery engineer with a full-time job. But in my freetime I design, engineer and build all kinds of things that cross my mind. I've been developing things forever and it's a lot of fun. Unfortunately my time is very limited. That's why it always takes a little longer until new content is uploaded to youtube. I try to describe my developments as good as possible in my videos. For me it is very important that things remain simple and can be copied by others.
I try to link all purchased parts to make rebuilding as easy as possible.
I put a lot of work and brainpower and time into my projects. I hope that this will pay off one day.
With "likes" and "subscribe" you can support me and bring my goal a little closer.
Thanks for your support!
In real life, I'm a packaging machinery engineer with a full-time job. But in my freetime I design, engineer and build all kinds of things that cross my mind. I've been developing things forever and it's a lot of fun. Unfortunately my time is very limited. That's why it always takes a little longer until new content is uploaded to youtube. I try to describe my developments as good as possible in my videos. For me it is very important that things remain simple and can be copied by others.
I try to link all purchased parts to make rebuilding as easy as possible.
I put a lot of work and brainpower and time into my projects. I hope that this will pay off one day.
With "likes" and "subscribe" you can support me and bring my goal a little closer.
Thanks for your support!
3D printed wet glue labeling machine
Discover my DIY 3D-printed wet labeling machine, the perfect solution for home use! This fully automatic wet glue labeling machine makes labeling bottles much easier. Whether you're a brewer, beekeeper or hobbyist - this 3d printed label machine will make your life easier.
In this video, I'll show you how to build an efficient labeling machine for your home projects with minimal effort and cost. This machine applies wet labels precisely and evenly to bottles, ideal for small batches of home-brewed beer, homemade juices or jars of honey.
Advantages of wet labels:
- Use of normal printer paper
- Simple printing with a home printer
- Production of small quantities without high costs
- The label layout can be adapted at any time
The machine uses a friction feeder to precisely separate the labels and an innovative gluing unit to apply the adhesive to the underside of the labels.
Learn more about the different types of adhesive and the benefits of dry gummed paper, which is simply activated with water and provides a clean, removable bond. You can find detailed instructions on my website. You can download everything you need to make it on Etsy or Cults3D.
You can download the files here:
only Label machine:
Etsy: fraens.etsy.com/listing/1728687560 (5% Code: "LABEL5")
Cults3D: cults3d.com/de/modell-3d/werkzeuge/diy-bottle-label-applicator-for-wet-glue-labels-bottle-label-applicator-with-3
Friction feeder + labeler:
Etsy: fraens.etsy.com/listing/1747502707 (5% Code: "LABEL5")
Cults3D: cults3d.com/de/modell-3d/werkzeuge/diy-bottle-label-applicator-friction-feeder-machine
There is a detailed description of the machine on my website: fraensengineering.com/diy-3d-printed-wet-labeling-machine-your-fully-automated-solution-for-labels/
If you are planning to buy a laser or a 3D printer, you will get a percentage with my links (affiliate).
Here you can buy the LaserPecker 4:
Link to LaserPecker LP4: shrsl.com/2i8w2-2ohi-17iq9
Coupon Code: Fraens10 for 10% OFF
Ortur Laser master 3 at the best price:
www.geekbuying.com/go/7aHbZXsc
Code: NNNFBDTORTUR
Creality Ender-3 V3 KE: affiliate.geekbuying.com/deeplink.php?affid=4143&url=www.geekbuying.com/item/Creality-Ender-3-V3-KE-3D-Printer-522292.html
Code: NNNDEV3KE
#wetgluelabelingmachine #3dprintedlabelmachine #labelapplicator #DIY #HomemadeMachine #Labeling #Etikettieren #beerbrewing #honeybees #distillingequipment
In this video, I'll show you how to build an efficient labeling machine for your home projects with minimal effort and cost. This machine applies wet labels precisely and evenly to bottles, ideal for small batches of home-brewed beer, homemade juices or jars of honey.
Advantages of wet labels:
- Use of normal printer paper
- Simple printing with a home printer
- Production of small quantities without high costs
- The label layout can be adapted at any time
The machine uses a friction feeder to precisely separate the labels and an innovative gluing unit to apply the adhesive to the underside of the labels.
Learn more about the different types of adhesive and the benefits of dry gummed paper, which is simply activated with water and provides a clean, removable bond. You can find detailed instructions on my website. You can download everything you need to make it on Etsy or Cults3D.
You can download the files here:
only Label machine:
Etsy: fraens.etsy.com/listing/1728687560 (5% Code: "LABEL5")
Cults3D: cults3d.com/de/modell-3d/werkzeuge/diy-bottle-label-applicator-for-wet-glue-labels-bottle-label-applicator-with-3
Friction feeder + labeler:
Etsy: fraens.etsy.com/listing/1747502707 (5% Code: "LABEL5")
Cults3D: cults3d.com/de/modell-3d/werkzeuge/diy-bottle-label-applicator-friction-feeder-machine
There is a detailed description of the machine on my website: fraensengineering.com/diy-3d-printed-wet-labeling-machine-your-fully-automated-solution-for-labels/
If you are planning to buy a laser or a 3D printer, you will get a percentage with my links (affiliate).
Here you can buy the LaserPecker 4:
Link to LaserPecker LP4: shrsl.com/2i8w2-2ohi-17iq9
Coupon Code: Fraens10 for 10% OFF
Ortur Laser master 3 at the best price:
www.geekbuying.com/go/7aHbZXsc
Code: NNNFBDTORTUR
Creality Ender-3 V3 KE: affiliate.geekbuying.com/deeplink.php?affid=4143&url=www.geekbuying.com/item/Creality-Ender-3-V3-KE-3D-Printer-522292.html
Code: NNNDEV3KE
#wetgluelabelingmachine #3dprintedlabelmachine #labelapplicator #DIY #HomemadeMachine #Labeling #Etikettieren #beerbrewing #honeybees #distillingequipment
zhlédnutí: 21 006
Video
3D printed Label Dispenser | DIY Friction Feeder | download all Files
zhlédnutí 5KPřed 2 měsíci
This 3D printed machine called Friction Feeder solves a problem that many people have already tried. With the right technology, however, it is relatively easy to separate a stack of paper or labels. The use of my 3D printed friction feeder is very versatile. The feeder can be used in everything from semi-automatic labeling machines to automated production lines. The separation of the sheets wor...
3D printed Vibration Rock Tumbler with magnetic drive
zhlédnutí 12KPřed 3 měsíci
Welcome to my CZcams video about the 3D printed Vibration Rock Tumbler! The 3D printed rock tumbler took about 4-5 months to develop. The goal was to polish rocks to an impressive shine, which takes some time. During the development phase, various challenges arose, in particular problems with spring breakage. Fortunately, these problems were successfully resolved and the Rock Tumbler has been w...
3D printed Sphere machine
zhlédnutí 127KPřed 4 měsíci
Producing a perfectly shaped wooden sphere without machine assistance is almost impossible. Industrial sphere machines are extremely expensive and far too bulky for home use. For this reason, I designed, built and tested a 3D-printed ball machine. The machine is comparatively simple in design and should be able to be assembled by anyone who can hold a screwdriver. Wooden balls are not only aest...
10 best 3D printed industrial machines.
zhlédnutí 3,9KPřed 7 měsíci
In this video I show you my 10 best 3D printed machines that I have designed, developed and built. These machines are the result of countless hours of development. Every single machine is unique and no one before me has ever built one using 3D printing. There is a separate video for each machine. You can download all building instructions for all machines. They contain everything you need to bu...
Is it possible to produce 3D printed optical lenses with a 3D printed lens grinding machine?
zhlédnutí 98KPřed 7 měsíci
In this video I show how to produce 3D printed optical lenses in relatively good quality. I have designed and built a 3D printed lens grinding and polishing machine. With this machine it is possible to grind and polish 3D printed optical lenses precisely. I show some experiments to find out the focal point. I measure the transparency of the lenses with an Arduino and a photoresistor and build a...
3D printed Vibration Bowl Feeder / Construction / Technical Details / Arduino Code / DDS-Algorithm
zhlédnutí 23KPřed 9 měsíci
3D printed Vibration Bowl Feeder / Construction / Technical Details / Arduino Code / DDS-Algorithm
CR-Scan Ferret from Creality / Post-process with mesh mixer and 3D printing
zhlédnutí 2,1KPřed 10 měsíci
CR-Scan Ferret from Creality / Post-process with mesh mixer and 3D printing
3D printed Wine decanting machine / DIY Decanter / Assembly instructions / Download all Files
zhlédnutí 2,1KPřed 11 měsíci
3D printed Wine decanting machine / DIY Decanter / Assembly instructions / Download all Files
3d printed Coin Sorting machine with Arduino/ 280 coins per minute / Download all files
zhlédnutí 14KPřed rokem
3d printed Coin Sorting machine with Arduino/ 280 coins per minute / Download all files
3D printed Laser Rotary unit with Ortur Laser Master 3 / Download all files, Technical details
zhlédnutí 6KPřed rokem
3D printed Laser Rotary unit with Ortur Laser Master 3 / Download all files, Technical details
3D printed Braiding machine - Assembly instruction / Download all 3D Files / Drawings andPartilist
zhlédnutí 27KPřed rokem
3D printed Braiding machine - Assembly instruction / Download all 3D Files / Drawings andPartilist
Fastest 3D Printed Semi Automatic Cigarette Stuffing Machine
zhlédnutí 60KPřed rokem
Fastest 3D Printed Semi Automatic Cigarette Stuffing Machine
Fully automatic 3D printed cigarette stuffing machine with Arduino / Construction/Technical Details
zhlédnutí 105KPřed rokem
Fully automatic 3D printed cigarette stuffing machine with Arduino / Construction/Technical Details
Community-Tap: Cigarette Stuffing Machine
zhlédnutí 4,4KPřed rokem
Community-Tap: Cigarette Stuffing Machine
Water Vortex / How you can build a water vortex / Physics of a vortex
zhlédnutí 4,8KPřed rokem
Water Vortex / How you can build a water vortex / Physics of a vortex
3D printed Paper folding machine / How a Paper folding machine works / How buckle folding works
zhlédnutí 31KPřed rokem
3D printed Paper folding machine / How a Paper folding machine works / How buckle folding works
First 3D printed sewing machine Upgrade / more details, improvements, all parts can be downloaded
zhlédnutí 6KPřed rokem
First 3D printed sewing machine Upgrade / more details, improvements, all parts can be downloaded
First 3D printed sewing machine / How a sewing machine works
zhlédnutí 35KPřed rokem
First 3D printed sewing machine / How a sewing machine works
3D printed Weaving Power Loom / technical details, how it works, construction
zhlédnutí 78KPřed 2 lety
3D printed Weaving Power Loom / technical details, how it works, construction
3D printed braiding machine / How it works, Construction, Technical Details
zhlédnutí 72KPřed 2 lety
3D printed braiding machine / How it works, Construction, Technical Details
Pneumatic Linear Generator with 3D printed parts.
zhlédnutí 18KPřed 2 lety
Pneumatic Linear Generator with 3D printed parts.
4 stroke solenoid Motor with 3D printed parts / How a solenoid engine works.
zhlédnutí 4,9KPřed 2 lety
4 stroke solenoid Motor with 3D printed parts / How a solenoid engine works.
Magnetic Levitation with Arduino. Technical details, Code, Circuit diagram, 3D Models, Circuit board
zhlédnutí 16KPřed 2 lety
Magnetic Levitation with Arduino. Technical details, Code, Circuit diagram, 3D Models, Circuit board
DIY guitar under 60€ with 3D printed parts.
zhlédnutí 2,2KPřed 2 lety
DIY guitar under 60€ with 3D printed parts.
Working 3D Printed Maneki Neko / How does it work?
zhlédnutí 1,5KPřed 2 lety
Working 3D Printed Maneki Neko / How does it work?
How to buy and cost ❤
Price
This is exactly what I was looking for! Thank you so much!
Hello, I'm glad I came across your channel! Keep creating! =) +1 Subscriber!
Thank you very much ;-)
That's are awesome tell me your WhatsApp number
Berapa harga nya mesin itu bosku
cults3d.com/de/modell-3d/werkzeuge/3d-printed-stuffing-machine
Per stampare etichette ci sono i service di stampa che anche per solo 100pz. non ti chiedono più di 20-30 Euro e sono pure adesivi... già con la colla sul retro e vengono molto meglio di questo accrocchio... tanto ingegno ma resa scarsa.
Well then... if that's how you see it, everything has been said.
Can this setup/magnet pulse at a frequency of 3 KHZ. or what is the highest frequency you can get out of this magnet?
The machine worked best at around 30Hz. At higher frequencies, the rotation was stopped by too little stroke.
Hello assalam walekum ji bhaiya mis call kharidna chahte Hain hamen kaise khel sakte hain😮😮
Good job bro
pretty job!
That's exactly what I need for the products of my small farm. I was watching many of the Chinese factory videos about these machines last year, thought about converting an old inkjet printer but never found the time to do it. This design looks really awesome, and perfect timing for the upcoming harvest! PS: Liebe Grüße aus Graz! : )
Hi, darf ich fragen was du etikettieren möchtest? Braust du Bier? Oder arbeitest du in Puntigam ;-) LG aus Weiz
@@FraensEngineering Hallo, meine Eltern haben eine kleine Landwirtschaft mit alten Obstbäumen. Daraus machen sie Säfte und Marmeladen hauptsächlich für Nachbarn/Freunde. Heuer möchte ich auch Essig und Most/Cider probieren zu machen. Alles eher im kleinen Umfang nebenbei, aber das manuelle Etikettieren mit Uhu-Stick ist als Abendbeschäftigung schon eher fad 🙈
Ja das kann ich mir vorstellen das diese Arbeit nicht so toll ist.
Price
cults3d.com/de/modell-3d/werkzeuge/3d-printed-stuffing-machine
these machines can put paper through no doubt
Mohon info alat ini sudah dijual bebas apa blm kk.kalau mau pesen kira2 harga berapa ya
cults3d.com/de/modell-3d/gadget/3d-printed-cigarette-stuffing-machine
hi can v get machune drawing of bottle laber with dimension , thanks lot for your creativity
Hallo, hier findest du den Labler: www.etsy.com/at/listing/1728687560/diy-bottle-label-applicator-for-wet-glue?click_key=3703690d79bec0109a2258daf18deefc82acf42c%3A1728687560&click_sum=c15b21c8&ref=shop_home_active_2&pro=1 If you want to have it fully automatic, I also have an article in the shop
finally something cool not just a benchie
Nice! Is 2 Jahre her, wo bleibt der Jacquardwebstuhl 🤣
Tatsächlich habe ich mir die Funktion in den letzten Tagen genauer angesehen und etwas darüber nachgedacht. Es ist schon nicht ganz ohne aber sicherlich machbar. schön wäre es wenn man die Schnüre elektrisch steuern könnte. Aber die richtige Idee dies günstig zu bauen ist mir noch nicht gekommen.
Vielleicht eine vereinfachte Form?
@@FraensEngineering Also die heutigen Steuerköpfe sind modulartig aufgebaut. Zwei "Rahmen" die 180° Phasenverschoben sind ähnlich wie bei deinem Zweischafter. Dann haste darauf Platinen sitzen die einzelne Elektromagnete steuern die dann die einzelnen Harnisch Seelen auf den Rahmen ein und aushängen. Das ein und aushängen der Seelen hat früher die Lochkarte übernommen. <- Was vielleicht ne bessere Idee wäre es als elektrisch zu Probieren.
Aber davon abgesehen. Bevor gleich zum Jacquard gehst, probiere es erst mal mit einen 5 Schafter. 2 Grundgewebe, 3 "Zierfäden". Damit ist mit Nockenwelle zumindest schon mal nen Fischgrätenmuster drin, mit Steuerkette auch interessanteres. Und auf deinem Kettbaum brauchst dann zwei Farben, einmal ein Grundgewebe und dann die "Zierfäden".
Ich sehe du kennst dich sehr gut aus mit diesen Maschinen. Ich verstehe nicht mal die Hälfte von dem was du schreibst ;-) Kennst du gute Webseiten wo ich mich einlesen kann? Vielleicht kennst du alte Pläne? Ich denke eher an einen halbautomatischen Jacquard. Vielleicht das man eine Nadel manuell durchführt. Dann betätigt man eine Mechanik und führ erneut die Nadel durch. Das schießen des kleinen Leichten Schiff würde ich als Fehlerquelle gerne ausschließen.
you can get better results with fdm printed petg tbh
Классно. Теперь можно на все бутылки дома сделать маркировку. Почему бы не одеть на валы прорезиненную термоусадку?
Wie lange dauerte das Projekt? Wenn ich bedenke da selbst einfache oft 4-5 überarbeitet werden müssen
Ich habe etwa 3 Monate an der Entwicklung mit Hochdruck gearbeitet.
@@FraensEngineering Das waren bestimmt 10kg Filament 👍
10kg waren es nicht. Aber 2-3 Rollen schon schätze ich.
@@FraensEngineering Zufällig Anlagenbauer? Als Hobbyist kommt man ja nicht gleich auf die Idee das Papier mit Rundschnüren einzuziehen. Nun Fehlt noch ne Version die Selbstklebeetiketten von der Rolle appliziert 😅
Ich brauch schon vom zuschauen ein Bier. Gute Arbeit.
This is the sort of things home 3D printing should be doing. We have enough benchies.
Awesome work! And btw, how much time did it take to assemble?
Once all the parts have been printed and the holes are clean, assembly is relatively quick. You only have to put everything together and a few screws to fix it.
Thank you for showing the messy workbench. Most youtubers make everything look so clean that it seems like they just magically get everything right on the first try. But your bench looks more like my bench when I am working on a project, and that makes me feel like I am the same as you, capable of the same things you are. That make me feel good. It is empowering.
Yes, it is a challenge to keep the workbench for video clips clean ;-) Do you also build machines? I would be interested.
@@FraensEngineering I try but they do not usually work. I need to scale up some and upgrade my space before I can take on biggee machines.
Cuanto me cuesta el telar de mantas x fa urgente me avias necesito urgente
Su número de teléfono para llamar
Como puedo contactarme sobre el telar de mantas
Nice work! I'm really impressed. I started working on a similarly complex machine, but gave up after a couple of months. Maybe I should get back to it... Where do you get the rods and all the extra hardware from?
Yes, it is certainly one of the most complex and elaborate machines I have built. The hardware is all from Amazon. So quite cheap parts.
So we need a 3D printed brewery now. Thank you for your awesome work !
Good idea :-) I'll think of something.
This is one of the best 3D printed machine ever👌🫙
Holy cow, that is an intricate design. Super cool! It must have taken tonnes of iterations to get it right?
Yes, it took a lot of pressure parts until it worked well. The glue module in particular took a lot of attempts to work well.
Excellent work, as always. What kind of super useful 3d printed device are you planning next?
I don't know exactly what I'm planning next. For now, gardening is on the agenda ;-)
❤Wow, you've really outdone yourself again , amazing build! This must be your most Intricate build! Did you reverse engineer?
Hi, yes it is certainly one of my most elaborate projects. I thought it would be easier at the beginning. But I'm very happy with the result.
Is it able to pick up stacked labels one by one
Exactly. The friction feeder pulls the labels out of the stack one by one.
Cuanto cuesta. Yo soy.de.españa
cults3d.com/de/modell-3d/werkzeuge/3d-printed-stuffing-machine
true genius!
great.bro
How much to build me one complete like a version 2 more refined and everything covered in a completed shroud to cover all the vital moving parts that if bumped or accidentally have something dropped on it would ruin calibration or break more precise and fragile fine tuned pieces u kno 500 750 1000 1500 2000k what's up
Hello, at the moment I am not planning to build a second version. However, I would like to make some improvements. You can download the current version here: cults3d.com/de/modell-3d/werkzeuge/3d-printed-stuffing-machine
Anychance u will be selling this machine or selling the full instructions with parts made that aren't 3d printed like the metal parts and the clear lexan or acrylic panels and the brass injector screws and the motors and options to purchase audrinos for extra or purchase myself
Hello, the machine is sold with all drawings and parts that need to be built.
machine price plz
cults3d.com/de/modell-3d/werkzeuge/3d-printed-stuffing-machine
Hallo Freund, ich freue mich, ich bin Steeven Future Ing Mecatrónico aus Kolumbien, ich habe die Dateien der Tabakauffüllung gekauft, aber ich habe ein Problem; wenn der Motor den Tabak in die leere Zigarette einbetten wird, bleibt er stecken, ich möchte Sie bitte um Hilfe bitten, geben Sie mir eine Wsp-Nummer? Vielen Dank!! Ich bin in meinem Bachelor-Job und unternehmerischer Zukunft
It's beautiful
สอบถามราคา หน่อยครับ
How to buy this machine?
cults3d.com/de/modell-3d/werkzeuge/3d-printed-stuffing-machine
Thank you for this genius design and your hard work to get it working!!
Perhaps in the future it can replace CNC and hand-made vibrating bowl feeders we used many feeders in our machines...
I think it will in the future. Making the bowls is extremely time-consuming. 3D printing is a very good option here. When metal 3D printing becomes cheaper, it will certainly be an alternative.
Perhaps in the future it can replace CNC and hand-made vibrant bowl feeders, we use many in our machines...
I have printed a few versions of 3d printed feeder bowls for my factory job, but never the base, very cool to see the effort you put into the design, and video editing.