Video

Have you tried any of those other 3.7v 18650 batteries in this. Like mine came w/only a 1200mAh one. I have some that r 4000mAh and 6000mAh was wondering if would work if so would give way more power time in between charging compared to the 1200mAh one it came with. So was wondering since I seen in your video u have some different 3.7v 18650 rechargeable batteries also u mention and show. But didn't say forsure what I'm wondering. Thanks great info video by the way

Great videos, very helpful! I’m debating between dunborc def-350 and ldarc-ct01, which one would you recommend more?

Holmes is the best but its x3 times the price of the Surpass.

Vielen Dank für das tolle Video, ich habe mir danach erfolgreich auch so ein Kabel zusammengelötet und es funktioniert einwandfrei. Jetzt kann ich mir endlich diese blöden USB Ladegeräte sparen 👍🏼👍🏼👍🏼

The HotRC stuff seems to be amazingly good for the money. They have a great range of interesting transmitters, too, including 2 different single handed controllers, great for making RC videos! I remember switching to DumboRC because my Flysky stuff would give me really bad latency issues in certain areas and with certain ESCs etc. The issues were resolved with Flysky's newer afhds 2a stuff, but it would have meant having to get new transitters and recievers to benefit from it, so I decided to give Dumbo a try. Dumbo was not only cheaper, but had much better range and resistance to glitching etc. The only thing that annoyed me with Dumbo, at the time was that parent company Radiolink deliberately split their higher end stuff (radiolink branded) and lower end (dumbo) so you couldn't, for example, use a Radiolink transmitter with a dumbo receiver, even though they were physically identical, because they firmware made it impossible. I didn't realise this at the time. It's nice that Dumbo have finally released a higher spec Transmitter, but it was a long time coming. The HotRC stuff seems to be even better value for money than Dumbo, with a lot of great features at lower price points plus those unique one handed transmitters etc. Seriously tempted to invest in HotRC. I'll still keep my dumbo stuff, but I might go with Hot moving forward.

it is not a "designated" crawler. it is a rock "bouncer". you must modify it to achieve "crawler" designation.

Tried to update the DDF-350 and it failed...I cannot use the transmitter anymore!

Thank you for the comprehensive review and comparison. Do you have experience with the FlySky G7p? If so, would you prefer that to these two? I know the G7p is a bit more advanced in some areas at least; however, I’ve read that the G7p has issues with the mechanical durability - have you experienced any issues in that regard?

Thank you for sharing, good to know these things that make your truck better 😃😃

@ donaldsneffe Do you have to keep the Bluetooth on your phone on and close by to be able to use this ESC? I can’t just turn the Bluetooth off on the phone and exit the App then run it?

Wow, very thorough video 🤙 What shocks would you upgrade with? Cheers 🤙

Servos are glitching badly in RedCat MT/XT Hexfly hx 30HT steering servos how do I fix this problem or do I need better servos? Using DDF 350

Great video and thanks so much man for the reference to the wire stripper it makes life so much easier than having to cut it manually, Thank you so much!

Ich erlaube mir dich hier etwas zu fragen weil du dich mit den CR18s offenbar intensiv beschäftigt hast ? Welche Motor alternativen zum Venom bringe ich da problemlos rein, ev. auch brushed, brauche ich/gibt es adapter ? Ich bin eigentlich SC24 Fanboy und kenn mich da gar nicht aus - habe mir jetzt den 2024 Trail Hunter bestellt weil ich den einfach so ohne rumbasteln fahren wollte, allerdings war nach zwei Minuten klar daß diese Venom/Lizard Lite Combo für mich unbrauchbar ist, sehr slow crawl und heftiger Sprung auf hohe Geschwindigkeit - so kann man nicht crawlen. Außerdem ist der Motor nach zwei Minuten so heiß wie eine Herdplatte. Wobei mir jetzt in einem anderen Video jemand geraten hat den ESC zu verbessern, hier liegen einige Pythons in der Lade, kann ich auch probieren. Sehr enttäuschend jedenfalls das Ding und RTR nur wenn man irgendwie herumbolzen will.

Hey great video, does anyone know where to get the EVO version of the flatbed part? Apparently they are different between the reg and evo editions.

This was helpful thank you!

I know this video is 2 years old but have they figured out the updates? I’m hear in the US and fixing to order one to try out in my crawler. Thanks for any updates and help

How to disconnect?

Very good video 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

Definitely dumbo for me, though I must admit I hate the (spin button in 1) as a selector. It makes it hard as it spin while pressing most of the time 🤬

Schade... keine Videos mehr, vom Experten... warst echt gut...

Richtig toll vorgestellt und erklärt. Ich bin begeistert 🙂👍abonniert ✌

Extraaaa

Donald, DumboRC DDF-350 vs Radiomaster MT12. Which do you prefer more and why?

Do you know how to limit maximum speed by adjusting ch.5,6or7? I tried channel mixing and end point but it just does not work. adjusting ch5 will just constantly increase ch.2 value so vehicle will just go forward in ch2 null position.

Sehr cool.

AAh nice und ich dachte mir schon das hört sich so nach arnold englisch an! find ich geil das du das machst! keep going. ich starte demnächst meinen fpv adventure trail channel. Nice Video!!

Echt gut erklärt. Mein Englisch ist nicht das beste aber bei dir komm ich noch mit 😅. Bin gespannt wie das sich in fcx24 im 2 Gang verhält..da kann man auch eine Dragbrake gebrauchen 😉

He’s says thank you fms, not! Lol I can almost hear him saying that. I don’t speak German but I left a like and comment to help you out, thanks for all the videos!

Are the inner gears of the ax3560 gearbox the same as the trx4m

Theres a version 2 now with 80% reverse, can you test it? I was wondering if the control and drag is still there in version 2 of the mb100 esc.

Do you know if the fs bs6 can bind to a radiomaster boxer?

Super, thx😊

Thank you very much. The Test was very good. And ! I could understand what you were saying. Good speech amd not so quick and good clear. Thank you. So I can make a Abo 😊 Best regards from Germany

I can’t get any 1.0 rims to fit. What are those rims 🫵

Hello to you, can you please tell me where I can buy decals for dash guages? I have a WPL B1 in restoration 1/16 scale

Your videos are great, I was referencing this video for another project and learned of the wire issue on the Furitek. Thank for the video!

Sooo a question then, beacuse suspension links, shocks and diff gears are interchangeable, then the metal replacements made for trx4m from injora and brands like that will fit? (also ps. what hex is the will on austar? 7mm?)

Das ist wirklich alles sehr hilfreich 👌🏻 Ich würde gerne eine Servo-Winde auf Ch7 legen (für ein/aus) aber trotzdem mit Ch5 oder Ch6 die Geschwindigkeit der Winde steuern. Meine Frage wäre, ob man das mit Kanal-Mix realisieren kann 😊

Where did you get the body panels, hood, etc?

Traxxas is one best crawlers ever Trx4m lol anyways okay I don't agree but ok.

это видео отличного качества

Most garbage radio ever. The OS is garbage. The pots are even worse garbage. Jitter on both steering and throttle. Only good thing about this radio is the proportional knob that works great for rear steer. Other than that, this radio is not worth the plastic it's made of.

1.52 dumborc saya tidak ada fitur ini. Apakah dumborc anda sudah di upgrade firmware nya? Tolong jawab

Thanks for the video! I ordered a Modelbau-Regler ESC immediately after watching this video for 1 of my SCX24's. It appears that there is quite a bit of dead band with both of the ESc's that you tested. Have you tried messing around with EXPO. It's seams that a little positive expo may limit the dead band a bit but I could be wrong.

I want to get fcx18, mn99, or the cr-24 hobbyplus. Really not sure which one would be best I like the size of the MN99 though. what do you think

Do you not have a mn99? Is this one better ?

Very helpful. I learned a bunch. The sound volume does exist on mine. You can set the tone level and off. I think its in model? I'm not close to my controller to look but I did find it.

Apa esc ini mendapatkan pendingin/heatsink

Hi, Great video! Im looking to purchase one of these for my rc crawler, Is it possible to customise switch A to be momentary? so when you push the button my winch would go out and then stop when i release the button and then when i push the other button it would go in while i hold it only?