![AKproXR](/img/default-banner.jpg)
- 457
- 3 905 043
AKproXR
United States
Registrace 12. 07. 2006
Video
Bought sight unseen - Polaris Pro R cross country race sled
zhlédnutí 2,9KPřed rokem
Bought sight unseen - Polaris Pro R cross country race sled
Raptor 700 - newest addition to the fleet
zhlédnutí 1,4KPřed rokem
Raptor 700 - newest addition to the fleet
2003 ProX 600 - ice racer to trail shredder
zhlédnutí 3,5KPřed rokem
2003 ProX 600 - ice racer to trail shredder
Polaris XC 700 and Skidoo Formula 3 trail riding
zhlédnutí 2,1KPřed rokem
Polaris XC 700 and Skidoo Formula 3 trail riding
End of the line for the 770 big bore ??
zhlédnutí 4,8KPřed rokem
End of the line for the 770 big bore ??
Polaris Pro X2 gets a new engine dropped in it!
zhlédnutí 2,6KPřed rokem
Polaris Pro X2 gets a new engine dropped in it!
I bought the CHEAPEST Polaris XC’s I could find
zhlédnutí 9KPřed rokem
I bought the CHEAPEST Polaris XC’s I could find
XCR 440/700 gets a track, suspension setup, tank
zhlédnutí 2,3KPřed rokem
XCR 440/700 gets a track, suspension setup, tank
If ya get out of the way , Mabe we can see what your doing!
Don't put your hands in the solution when it's running apparently can be very bad for your hands joints to do with sonic waves
Good information in the comment section. I'm trying my ultrasonic cleaner for the first time and maaaaan it's rough on the ears.
Be careful putting your hands in the machine when it is running. The ultrasonic waves will damage your connective tissue and nerves in your hands after repeated exposure.
2:24 The forbidden Polaris curse! Trust me its not just you!
Are you still alive Must be busy working
I have /am using All those same Degreasers .. cleaning my engine parts. Also Bought a Heated Ultrasonic Gizmo to use. I promptly sent it back for a Refund It didn't do enough to justify it's Price.. Don't believe what Utube videos claim :-)
I have a 1976 model 140 less than 50 hrs on it the guy I bought it off broke the starter pawl and did not want to wait for another one so it sat in his garage for 45 years, I got a bunch of Pawls made out of acetal plastic by CNC machine, anyway has anybody had problems with the water pump? I put 2 new impellors in but I cant get it to pump water
I ran 100% Simple Green Pro HD on a spare junk carburetor without discoloration or other issues at 150 degrees F for 30 minutes. Next time I'll dilute but it's worth an honorable mention.
Your neighbors love looking at your fukn yard 😂😂😂😂😂
You failed to clean all the metal shavings out of the crankshaft bearings and base of the crankcase.
Carbon monoxide anyone!
Loose snow there bud? I Don't know
Up there once.go home and eat some hotdish
😂
So you ride a red rocket? Dog person? I own an out of date snowmobile that's red and is a 440. They are no longer in production. They were fast compared to snowshoes.
Hey man. Im building a ves 700. I would love to ask some questions and maybe buy some parts if you have them or tell me what I need. Thanks man
@AKproXR i have a 04 Pro XR 800 with SLP twin pipes on it and im wondering if its worth buying vforce 3 reeds for it? I can't find much information about it on forums.
Top Notch and love the commentary. Helped me tremendously.
Amber did a good job on cleaning up the sled
I'll never trust oil injection again. Premix only for me. Like seeing your videos with amber in them.
Hey bud, just wondering, what's needed to convert a stock 99 style non-ves 700 into one of these 770's? Based on what you were saying, it sounds like it was just the standard 700 crank and case, with 800 pistons and cylinders right? Cause you said it's basically an 800 but with a 700 stroke? Does it require programming the CDI for the timing? Or could you theoretically just slap a set of 800 cylinders and pistons on it and have essentially a 770?
One other thing you have to do is replace the oil pump, because the original oil pump in the 98-02 or 03 non-perc motors wouldn't pump oil in reverse, so you've got to swap it over to avoid accidentally blowing your motor from lack of oil.
How long do you run a sled in reverse? Have you seen how slow an oil pump actually pumps oil? It will not hurt a sled using an older pump, unless you leave it in reverse for hours.
@@AKproXR I personally haven't had my sled blow from this, but I have seen it happen. I only said what all of the forums and Polaris techs have told me, and I've been inclined to believe it after seeing one of my buddies sleds blow after about 4 minutes or so of being in reverse with the older pump.
Francais s.v.p
How bout the 01 700? Is that a good one to grab for racing?
Mine Xcr 440 have a idle rpm of 500-1000 ;(
Appreciate this one bud, I got a question for you though, would someone be able to slap a set of 800 VES jugs on a 700 non VES crank and case? I got a set of good jugs for an 800, and the top end just went in my 700, so I'm wondering if I could just buy a set of 800 pistons, rings, and gaskets, and slap her together or if I'll need to get some new 700 cylinders and pistons since it grenaded them.
Hey,mister Akproxr youtube creator. , are ya selling any late 90s Polaris snogos for an AK N8ve to own. These rigs are die hard, compared to recent models . I love in the boonies part of rural AK. I desperately need a reliable beater heater of Polaris 90s era.
How many different 700cc do they have from 98 to 2004 and which ones are non and ves. Is ves better or what's the difference. Thanks
I was helping a relative on a 1999 rmk 600. They had put the puller and oil pump on, and 2 oil line was cracked I change them but I'm not sure where they connect to. If you can help me out show the oil lines that connect to the oil pump
So, could you use the normal old lower compression head on the ves to get better throttle response and burn lower octane feul?
Are the 01 700 motors ves and non ves also? I'm trying to start racing and I need a 2001 or older sled.Or any recommendations on which sled to pick? Thanks for any help
i was lucky that i had this sled in my junior years i didnt just know that it was this powerfull because my speed handling in 10yrs old wasnt that good this video gave so much memories.
🔥
Hey man! Where ya been? Family and work holds thing back I know but let us know what’s going on!
Just wanted to say that I got one, a pre-series -97 xc700. One of four that made it to Sweden 🤙🏻
Awesome!
It’s 10 times times better when the snow is soft
Where the heck you been? Missing the vids.. hope all is well.
Purple power was right a corrosive solvent type
I have a xc 700. How does the needle come out of the slide. I didnt want to break it Does it unscrew
Where is this tripple ?
Bro we miss you. Where did you go?
Garrett, where are you my friend, we miss you!!!!
❤❤❤
Akproxr, do you know the measurements of the prox mounting bolts for tunnel to front and rear arms on the pro x . The polaris part numbers don't show bolt sizes. Figured I'd reach out. Haven't seen any your videos in a minute
Do you potentially have a pro x2 or pro xr seat for sale?
I've got a 01xc800 engine. Budget build. Have you ever just just replaced wrist pins? My pistons are good. But I got it back together last night and it's chattering. So I think I need to do wrist pins.
Cool comparative test. You get the most out of sonic cleaner if you fill up to the fill line.
Will a 99 big block 600 no ves crank fit a 01small block 600 ves?