Bosch dishwasher no power

Sdílet
Vložit
  • čas přidán 29. 01. 2019
  • Damaged junction box connectors
  • Komedie

Komentáře • 20

  • @misterjoe3
    @misterjoe3 Před 2 lety +2

    Thanks SO MUCH. You just saved me an expensive service call (at the very least) or the cost of a new dishwasher !!!

  • @OroStation
    @OroStation Před 2 lety +2

    This dude just going around dropping knowledge and saving everyone cash. @/legend. Mine was burnt out, getting a replacement harness, 26 dollars. Easy peezy, 20 min job. Thanks man, saved me the wrath of my mother in law and wife. May you have a wicket week!

  • @rolandwood148
    @rolandwood148 Před 4 lety +3

    Great video, I had the same issue of no power after the unit operated for 15 years. Per your video I opened the junction box on the unit and the wire nuts looked exactly the same as the video. The hot side wire nut melted and the wire did not short to the frame so the breaker did not trip but the dishwasher side wire melted away from the power wire. Therefore no power at all. I cut and reconnected the wires and the unit now runs perfect.

  • @familysyed1682
    @familysyed1682 Před 3 lety +2

    Thank you, You just saved my $ 150+ ( my wire and wire nut was melted in the box ) I reconnect it now it is working fine.

    • @mahleeboo
      @mahleeboo Před rokem

      Same w me--couldn't believe it was so easy to fix!!

  • @david-iandawson
    @david-iandawson Před 4 lety +2

    Great video. My dishwasher has t same symptoms ie no power also is integrated into t units 🤬. I'm an auto electrician so il be doing some basic tests when I bring home my multimeter. Thanks again 👍

  • @B_with_13_Es
    @B_with_13_Es Před rokem +1

    YEP! we think this just happened to our Bosch. Power on the wall works and breaker isn't tripped. Had it for a little over a year

  • @jasonpsink9828
    @jasonpsink9828 Před 3 lety

    Thank you so much, this was my problem as well which saved me from simply replacing the entire unit...thanks again!

  • @DarrenWhittington
    @DarrenWhittington Před 3 lety +1

    Had very similar issue with a UK model, the live on the plug had shorted, needed to replace wall socket and plug, all working now

  • @tiktoktiktok9308
    @tiktoktiktok9308 Před 2 lety

    Thank you very much , my wire connectors had to be replaced with new ones.

  • @wazupuass
    @wazupuass Před 3 lety +1

    Thanks man, this fixed mine

  • @subsailor650
    @subsailor650 Před 3 lety

    Very helpful. Found the exact same problem on my dishwasher. May want to add a step to RESET the controller. After replacing the terminal block, the unit wouldn't sequence thru the cleaning cycle. Holding the three wash buttons down for 3 seconds (buttons labels with cancel/reset over top) reset the timing sequence..

  • @mrc4912
    @mrc4912 Před rokem +1

    For a dishwasher that costs so much, they shouldn't be having basic issues such as this. My fairly new Bosch dishwasher won't turn on a lot of times until I slam the lid a few times. Last Bosch appliance I'll ever buy....

  • @speedstreet2573
    @speedstreet2573 Před 3 lety

    thx that was the problem =]

  • @anthonywilson4873
    @anthonywilson4873 Před 4 lety +2

    Bad connection means high resistance means heat and damage. Moisture getting into connection causes corrosion and starts whole process?

    • @toddolsen995
      @toddolsen995  Před 4 lety +1

      Possibly. It's usually a result of the connections not being secure, or wired in reverse in this case.

    • @nicbarkadix
      @nicbarkadix Před 3 lety

      Todd Olsen what exactly do you mean when you say wired in reverse ? Is that even possible?

  • @annakitchen8692
    @annakitchen8692 Před 2 lety +1

    My dish washer isn't even 1 year old. Do I call the number on dishwasher to fix the power issue or can electrician do it?

    • @toddolsen995
      @toddolsen995  Před 2 lety

      Check the breaker panel first, if that doesn't do it call bosch, and there's most likely a warranty on the unit, they can schedule for a service visit.