✨ DISHWASHER HAS NO POWER (EASY FIX) ✨
Vložit
- čas přidán 19. 01. 2019
- ✨ DISHWASHER HAS NO POWER (EASY FIX) ✨
How to replace the fuse on a whirlpool and Kitchenaid dishwasher with no power.
CLICK HERE TO ORDER A NEW FUSE: amzn.to/3qT1Nex
Click Here to order Consumer Report’s Top Rated Bosch Dishwasher: amzn.to/3RQ6AqM
Click Here For Over 300 Easy DIY Appliance Repair Videos At Our Brand New Channel: / bestdiyappliancerepair...
*** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @quickandeasy5minuteap...
🛠-Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @quickandeasy5minuteap...
💻-Website: www.ScottTheFixItGuy.com
📖-Like us on Facebook: / scottthefixitguy
🐥 -Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
-👀See our CZcams Channel: / quickandeasy5minuteapp...
🙏-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
🔌-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY"
Need Extra Help with Your Appliance Today - Click Here:asqme.com/@scottthefixitgu
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Appliance Yourself and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu - Jak na to + styl
You are awesome sir! Reset worked and ordering another one now! Thank you very much!
Great job Jason😊👍
We were ready to scrap out dishwasher and then I took your directions and slammed the fuse off of our concrete step and we are now running some dishes in the dishwasher. Thanks a million
I love it❤️👍😊
Thanks Jesse😎
Thumbs up Sir, resetting the fuse is all I needed to do. To easy to save over $700, my lady wanted to buy her a new one.
If I could give this guy 100 thumbs up I would. We need more CZcams content like this. Not people trying to become instafamous. Great content, keep it up. You are a lifesaver!!!
Thanks so Much Jon😊👍
I just did exactly what you said and banged the fuse on my garage floor. Works like a charm. Thank you so much you save me a ton of money.
That is super cool😎
Going to have to try this!
Very nicely done. My model is different and the fuse is different but your clear description and explanation is great. I was able to repair mine because of your video. Thank you.
Thanks Boss...I just changed the fuse on my dishwasher and it worked like a charm
This is the first time I've worked on a major appliance, but I figured it's broken so why not try? I've never even used a multimeter and had to go buy one and then watch another video to learn how to use it for continuity testing. I already had some Torx screwdrivers and your instructions and camera work were perfect! My dishwasher is not a Whirlpool, but it's nearly the same and so I didn't have to remove the black cover over the fuse section. I did have to bang the fuse on my garage floor and, wow, like magic, continuity! I'm running a load of dishes right now and my spouse is very impressed - as are my girlfriends who are scared to try things like this. A big THANKS to guys like you who help us women (and men) learn new skills here on CZcams! Thanks also for saving my household money and possibly months of waiting for a new dishwasher with how everything is being delayed due to the cargo ships.
That is Great News!
Happy New Year🎉🥂😊
Saved me probably $200. Left a small donation. Thank you!
Thanks Steve😊
I thought I was going to be without a dishwasher until I could order the fuse, and then I happened to see your vid. I must admit, I had no confidence that slamming the fuse on the floor was going to do anything but give me a little discharge, but dang, it worked like a charm! Thanks so much!
Very cool😎
Instead of hitting the fuse with a hammer, I hit the dishwasher with a sledgehammer, repeatedly. I feel much better.
Yep, that works too😂😂😂😂
I'm about to be there! I have 3 teenagers and we live on a farm. 'Nuff said.
I wish I could 😭
Still have to replace the fuse tho
I laughed when you said to hit it with a hammer. I said, yeah, right. DANG! It worked! Thank you. Subscribed now.
Thanks Rob, all you need is a big hammer and a roll of Duct tape😂😂😂
I did replace the fuse after the old kicked off again, but the new fuse lasted about a week before it kicked. Problem not solved yet, but I can pull that top panel and slap that fuse and put it back together faster each time, now. Down to about five minutes.
Perfect. Thank you so much!
Thanks. One minute holding the start button got er done. Praise the Lord and Scott the Fix it guy.
Thank you! Reset worked perfectly. I’ll order a new one!
Excellent 😊
Thanks a lot!! The fuse reset worked for me
Awesome,
Thanks so much Henry😊👍
Loved the fuse reset tip, thanks so much.
Thanks so much Tony 😊 I hope you’ll click here to support us by joining our Channel: czcams.com/channels/GpInAejvpfVVE4FHB_L-Dg.htmljoin
You’ll get Live Appliance help when ever you need it.
Great video. Thanks my sons dishwasher has no power and I’ll check it out👍
Thanks Andrew😊
You saved my butt and my wallet! Thank you for this.
Great hint great content, not only $$ saving, but more importantly, time saving
Great video.... Changed the fuse and it worked perfectly the first time, then it blew again the next time we used it... guess I have other issues that are causing it to blow .. ugh. Thanks for the video. Your instructions were very easy to follow and explained very well.
Nice job Bill, I wonder what’s making that fuse blow?
Hopefully you got this fixed. If not, check that all wires have good inulation on them, and that no bare metal connections are happening
Thanks. That was the most helpful video.
Thanks a lot Sir, you just saved me from buying a new dishwasher. I changed the fuse of my KitchenAid dishwasher and it came back to life.
Nicely done 😊😊😊
Thank you so much! This was very helpful!!
You’re very welcome 👍😊
Thanks men so helpful video it save me to buy a new dishwasher thank you so much
You are very welcome👍😊
Thanks so much! This worked for me as well. Subscribed.
Awesome,
Thanks so much for subscribing 😊
Massive help, thank you 👍
Glad it helped😊
Thanks!
You’re welcome 😊
Thank you
You're welcome😊
Scott, you've saved my arse several times. Cheers
Happy to save you😊
Thanks man... Worked perfect.
You're welcome!
excellent video Worked for me now the wife is happy 😊
That’s very important🤪👍
I've given up finding a thermal fuse in my model Kenmore Elite 665.12783k311. It doesn't exist. I've taken it completely apart. Good luck getting it back together!
Thank you excellent video!
You’re very welcome😊😊
You're the KING! Worked on my Whirlpool Quiet Partner II, bang that sucker! Thank you!
Thanks Derek😊
Daamn . That fuse reset worked . 💪 thanks man
Awesome,
Nice job😊😊😊
awesome video! thank you!
You’re Welcome 😊👍
Thank you so much!!!!
You’re very welcome😊
This is so helpful!!! Thank you very much. One question... Is there much of a shock risk while working on it?
Hi George,
As long as it’s unplugged, there is no risk👍
Perfect fix buddy. Thank you so much for the video.
Thanks Matt😊
@@QuickAndEasy5MinuteAppliance a
3:18
I just bought a brand new whirlpool dish washer. Hooked it up, used a new power cord. When I plug it in the control panel flickers for 3 seconds then all power is off again. When lights do come on, it's like half light up almost like a brown out
I have no idea what to do other then return it to lowes for a replacement.
Any ideas? WDF520PADM is the model
I had the uncommon problem the latch has two arcade button switches and one was sticking in so I worked it loose and is fixed until I get a new one, im sure it will stick again eventually.
Nice job😊
I seem to have this exact problem with my 3yr old GE dishwasher. My door has no screws, however, although it appears the cover to the panel might pop off from the outside/front. I'm afraid to try to force it without confirmation--does anyone know for sure?
Thanks
Welcome
Can you get the part at Lowes or Home Depot
So if components get to hot and trip the fuse and I replace the fuse don’t I still have an issue (hot components)?
Great video thank you...I have been looking for a fuse to purchase but only finding "capacitor"..are they basically they same thing? thanks
Can you send that same question to me at my email at scottthefixitguy@yahoo.com along with your model number?
After having no power to the dishwasher, I replaced the thermal fuse and wiring. Once complete, the power came back and when I started the dishwasher cycle water started to flow as it normally does. After 10 seconds it stopped. The lights are still on, but it seems like its stuck. I canceled and started a new cycle. Same thing, it starts like normal, water starts flowing in, and then after 10 seconds it stops. I can hear the control panel inside clicking. Any thoughts?
I just replaced the whole control panel, but used the old fuse again, and dishwasher still doesn't work, so NOW I will try to reset the fuse!
And???
Could the door switch cause the machine to show no power ?
Hi, when changing the fuse do you leave the dishwasher power on ...if so is this safe
Unplug for sure👍
Nice trick about resetting the fuse. Are you sure it's actually still a fuse and not just a completed circuit? If it's permanently connected then that could be a fire hazard.
The fuse is modular so it’s easy to replace 👍
I bought a whirlpool from Lowe’s 8 weeks ago. One day it had no power. I called whirlpool because it’s still under warranty. A guy came out and said it was an electrical issue in the house.
Can you send that question to my email at: scottthefixitguy@yahoo.com
Always cool to learn something... Lights came on, which another might say is concerning. Best to turn off power for most of us.
Please pardon if I missed that being said.
we have same dishwasher wondering what is the model number
Thank you so much!!!! 🙏 I'm going to have a crack at that. Nothing to lose,' cept a few hundred $$$. Can you please explain the door latch problem?
Great Question Caroline👍 Click Here to Get Live Expert Help From Me For Just $5.00:
czcams.com/channels/GpInAejvpfVVE4FHB_L-Dg.htmljoin
Please explain how and WHY banging the fuse resets it!? I’m an appliance technician and have never done this so I’m very interested. After you bang it, how long does this type of “fix” last? WHY does it even work on the first place? Please advise! Thank you for the tip!
I threw mine on the concrete patio, it works
From what I gather it resets the fuse that pops when heated up- its like an umbrella that gets blown upside down. Atleast that's how the thermal cutoff fuse on my dryer works.
I have had GE door sw cause problem. When dishwasher installed. top clamps drawn upward to much and in time bow the upper cavity ever so slightly making the door switch not function. Easy fix. Apply some shims where it is bowing up and shim it just enough so it is straight again. Problem solved.
Very good solution😊👍
Does the thermal fuse you mentioned in the link work for any brand? I have a 19 year old Bosch dish washer. Can't find the model number.
What symptoms do you notice about your Bosch dishwasher?
@@QuickAndEasy5MinuteAppliance It doesn't power on. Circuit breaker turned off when this happened. I turned it back on, but no power to the DW. (No lights) Bosch model SHE43RL5UC/64
I’m not finding a fuse on my Frigidaire dishwasher. So my only option is to replace the control panel? Suggestions on where the fuse could be?
Hi Robert,
I think there’s one connected to the control board in the door.
@@QuickAndEasy5MinuteAppliance I'm having the same issue with my fridigaire. Doesn't seem to have one in the door portion. The model I'm working with is FFBD2406NS11B. I have checked in the panel behind the buttons, as well as all throughout the door. I have read about a thermal fuse being down below, but haven't got around to checking.
Hi. Could you please tell me your camera set up?
Sure ,
I use IVUE Rincon Video glasses👍
My question is your mention the lock what if the lock is stuck how do you open it
Can you send me an email at scottthefixitguy@yahoo.com so I can give you more detail on the fix?
Hi any idea where the fuse is on a belko dishwasher I’m struggling to find one
Thank You So Much for A Great Question.👍
Can you send that same question to my email at: scottthefixitguy@yahoo.com
I’d like to offer You Our Channel Membership That Gives You ✨LIVE HELP ✨With Zoom or Texting or FaceTime. Click Here To Join: czcams.com/channels/GpInAejvpfVVE4FHB_L-Dg.htmljoin
Thanks Again,
Scott
Can the fuse intermittently stop working? My power intermittently goes out on my ge. Usually unplugging it for an hour it'll fix it temporarily. I replaced the control board. Still the same. A month later and the unplug trick isn't working anymore.
Try removing all the wires from the circuit board located below the door and then plug them back in👍
After resetting the fuse and turning it on. The washer is coming up with 2 minutes on the board. After the two minutes are up, I'm stuck right at the beginning, no power.
Can you try it again and when it shows two minutes can you press cancel to see if that will reset it.
Hold cancel button down for thirty seconds, that’s the ReSET Button!
Thanks Mitchell, good info.👍
My dishwasher has this problem but i dont know where the plug is where can i find it
Thanks Sam,
Which plug do you mean?
@@QuickAndEasy5MinuteAppliance where my dishwasher is plugged into. Cant see an outlet, could it be plugged into the wall behind it?
That's why if you just kick it sometimes it fixes things
Yep😂😂😂😂
What's the fix for door switch? Need to change parts?
Can you send your model number to my email at: scottthefixitguy@yahoo.com
The fact there are like 900 videos showing the same exact brand and problem says everything about this junk. You know what would be better than a thermal fuse you have to replace? A damn sensor that stops the appliance from ever getting too hot. What a concept.
I know this is an older video. Ive got a black whirlpool dishwasher. From around late 2017 is when we bought our house and replaced the dishwasher. We only used it about 1 time per week. It died about 6 months ago. Its one that has the buttons hidden under the counter once its closed. There is zero light or power going to this thing. Will this video fall in my lane? Thanks in advance.
Can you plug a lamp into the same receptacle that the dishwasher plugs into to see if the outlet has power?
It's hardwired unfortunately.
The light on start won't stay lit to start. Please help.
Hi Carol,
Can you send a video of that to: scottthefixitguy@yahoo.com
If I put the old fuse in my driveway and run it over with my car, will that reset it?
You’d need to hold it with pliers and bang against hard surface.
i was told if you put the fuse in the middle of a sausage and hit the wife over the head with it ...that works...but not on a Thursday
Scott, thanks for the tip. I did smack the old fuse on my patio floor, then put it back in and it worked! Who woulda thought to try that?
So long as your holding it with the pliers 😀
The fuse I meant😕😀
All I did was open it to put a knife in it…I used tofu all my stuff. But now I haveALS and can’t go taking it apart.the breaker box is ok.any ideas?..
Ment used to fix my stuff
Mine is odd. It no longer lights up after washing to show it’s done, all lights off. So I have to go flip the control panel in the garage to get it working again. Last night it took me 15 times of flipping the fuse box to get the lights to come back on. I actually hear it trying to do something after I flip the fuse box each time… HELP!
It’s a GE dishwasher approx 18 months old.
Normal light and delay light is blinking
Usually the touch panel
Cmon dude. Banging it? Didnt work on my wife either
😂😂😂😂😂
Sucks that I'm here but I'm here
Did u fix the problem?
@@macheteslice hi! Thanks for asking and yes I did:) fuse needed to be reset, tried running it over
I threw my fuse around on the concrete a few times. I didn't think of running it over, maybe next week when it the dishwasher takes another nose dive. Have a good one.
Mines died 😢
Can you try disconnecting all the wires from the circuit board below the door and then put them back on to see if it’s better.
DW80N3030
www.fixya.com/support/t27115673-normal_light_flashing_samsung
Probably a leak underneath
pretty cheap, $30.....
Yah, they need a new power board, but it is pretty cheap👍