Very nice shooting good groups for a windy day liking that nova not bad for price , I was out shooting my hatsan air max 22cal today 100 yards it was windy about 12 mph the 18gr jsb were every where 3 inch groups but at 60 yards quarter size groups on a perfect day nickel size groups , I enjoy watching your videos very much awsome
Robert Kruckman , let me tell you it's got some major power pellet flying every where , I had to back up the hammer spring 1 full turn to lower the velocity to 910 fps with jsb18.13gr accuracy right on and it nickel groups at 50 yards on a good day , going to try 21 GR NSA hollow point slug but will have to crank up the power a little , may the weather will get better for you can get out and shoot your new air max 22cal .
Didn't know air rifles could shoot that accurately. Thanks for sharing all your hard work on modifications. I learned a lot along the way. Beautiful gun!
Thank you for showing actual, realistic real world groups. Flyers and all. Some other you tube videos get rather frustrating with every rifle shooting perfectly and every group under a half inch. Thanks for keeping it real. Appreciate your integrity, fantastic 100 yds. group! Great job on the stock.
Lady Liberty.... Oh my GAWD! Stephen!!! Dude!!!?? Ok Moving on LOL I think they may be flying a bit fast, I think if you get them down around 880 FPS you may see those group tighten up a lot. Thanks for braving the range and capturing the action. I for one know what it takes to run multiple cameras and sift through the piles of video files to assemble one continual video for others to enjoy. I have to say, man, that rifle is absolutely gorgeous, nice job all the way around.
Thank you Hajimoto, that was my attempt tat being funny. Yeah lining up three cameras sucks but its worth it. It means a lot to me that you appreciate it. Thanks again.
That's nothing to sneeze at!! Lady Liberty......HAHA! Nice. My question is are you just grabbing pellets out of the tin or are you washing, inspecting, weighing and head sizing? I would hope after all the time and work that you put into the Lady that you just wouldn't cram anything into her.......Of course your using quality pellets but, even the good pellets have to be cared for if your looking for even smaller groups. Haj makes a good point....and there's that 13 mph wind💨😫
Absolutely amazing rifle great job I have the 177 version it’s stock but shoots incredible up to 4o yards it hangs with my fx rifles amazing job on the stock
That stock turned out very nice!! Ill be starting the walnut stock next month. Im going for a similar look to the fx crown. By the way, those are nice groups at 100 for 13mph winds. And 51 fpe is awesome. Cheers from Canada 🍺
However, at the start of the video, you mentioned that you did a range of tasks on the rifle, crowning, adjusting the reg, basically tuning,and so on and so forth. The thing is, not all of us have the gift and talent to tune our rifles that good. How I wish there is a rifle at that price range that shoots like that out of the box.
David, the nova Liberty and the air venturi avenger are extremely good right out of the box. I just really like to find time my equipment but it's not necessary.
Im the same way I want hit bullseye all the time lol ...or I mean small groups ...but it doesn't always happen and I get frustrated bad 😆 it's the wind that's throwing you off ..but nice job I enjoy watching all your video
Hi Dude! Greetings from Brazil! I think you may be cocking the gun too fast, this valve takes some time to stabilise pressure. I think waiting around 10s between shots should be enough, and maybe you got a lower spread. By the way, this gun is awsome for the money.
Nice video. You did a lot of work on a budget gun and got it shooting pretty well. If you outlay a little more cash and buy a LW barrel for it I think you'll be amazed at what that will do to tighten things up. With the L&W you'd probably be getting .5-.75 inch 10 shot groups with almost any of those pellets.
Air Velocity Sport Search bar Lother Walter down in Georgia. Bought barrels from them😎 this is ken Brown btw change my CZcams name but screw up the last part of the name have to wait 90 days to recharge it. I’m on Arron Cantrell Videos on CZcams. If you plan on shooting slugs I suggest a lw non choked barrel. Just measure the od of the barrel an order $122 shipped to your door👍🏾😎 the barrel is holding back the potential of your gun😎 night and day difference with a Lother Walter barrel👍🏾
I agree with Haji about lowering velocity to see how precision responds. The higher pressures required at you current settings are likely tilting a few pellet skirts at the muzzle. A line of sight camera with the sun behind you would be very telling on what is happening with those fliers. I suspect you would see some occasional spiraling.
the gun is beautiful, cold temperatures will decrease the power in pcp, gas/vortex airguns , I'll keep it inside 50yards unless your a long range shooter ...100 yard groups aren't bad at all
BTW , Even though this vid is a bit old, Great tune & Great shooting ! Especially in those harsh conditions. 38 with wind chill. Prob. about 30 or lower I bet. Thats pretty low to be out hob nobbing about for hours.
dont know yet i would make a educated guess i could even fit a fx barrel to this !if you get the dimensions right where they will fit i would assume they would work right ? i can tell you for sure that nova makes some very good barrels also ,100 to 150 yards i can consistently hit what im aiming at and a 4x16 scope helps also ! i am waiting for nova to possibly sell caliber change kit ,i have seen where the Seneca aspen just came out with the .25 ! .....imagine if nova came out with a .45 or better .50 cal that was like the nova freedom where you could pump with on board pump in the field and get the power of a umarex hammer ,wow !!!! how cool would that be !!! we are indeed living in awesome times and the airgun world is pretty amazing !
Hey my name is Zack I do leave in NY and own the gen 2 benjamin marauder in 22. supposedly wit Walther Lothar barrel but seems like I'm not having a good luck with the grouping at 30 yards which is strange. Anyway if you have a idea what could I try to make it more accurate. Without sending the gun to tuners and such. I'd really appreciate your suggestions. Thank you
Rifle looks beautiful. Question. Did you turn up the power for the barracudas? Because I noticed it wasn't much of a drop in power compared to the JSB'S 18.13s. And one more question did you build that stock on that rifle or was it purchased? You did a really nice job on the finish. I left a comment on your video when you were finishing your stock as to how I did mine. When you said wow e wow. You reminded me of Everybody Loves Raymond Ray Barone. You can definitely tell your from New York or someplace close back East LOL. Stay warm my friend. Looks cold out there. From New Mexico happy shooting brother.👍✌🇺🇸✌
Hey Rich, yes I turned the hammer spring adjuster up for heavier pellets and down for lighter pellets to keep them around 900fps. Yes, I've been told that I sound like Ray Romano. From Brooklyn. I wish I could go to New Mexico during the winter. Thanks enjoy the warm weather.
@@AirVelocitySport Thanks for the reply. I really appreciate you taking the time to make these videos and all your DIY's. It really helps guys like me take the guessing out of the game. I really do enjoy them. I'm a big air rifle enthusiast. Right around 890 to 900 fps is what I keep all my air rifles at. Stay blessed brother can't wait for the next video. By the way Ray Romano rocks. LOL👍✌🇺🇸
Nice shooting! What did you find was the best velocity range for accuracy with the JSB 18 gr and the Cuda 21gr pellets? Any idea what the twist rate is?
Thanks! This is different than what Air Venturi told me for the Seneca Aspen at 16:1. I wonder if they are using a different barrel for the Avenger due to the greater velocity potential.
your vids of making stocks are really out of this world, very informative, detailed and in my opinion def hardly anyone on youtube does any better.... but back to business...get of the bag and start free hand shooting :D
Hi. Not alone the the cold of air pressure ( unstable regulator ) play in to shooting also temperature of the barrel come in to focus !! And how hard or soft lead will be ! We all know air gun shooting is not longer what it was 20 years ago It is almost rocket science !!! :)
Oh just a question another gentleman asked you where did you get that stock ? if you could list the other parts ? I'm really thinking about getting that gun!
This gun is pretty great right out of the box if you get the wood stock. Just up the regulator and add a shim or two to the hammer spring and you are good to go.
@@AirVelocitySport Stephen, Bro you did one hell of a great job making that stock!!! You are the envy of the Nova Liberty clan my friend! I only wish that I had your artistic talents so that I could fab one of my own. Unfortunately yours is a God given ability that not too many of us share. I have found that unlike with mechanical/electrical skills, artistry isn't easily learned and you either have it or you don't. Thanks again for another great video on the Liberty, but I do have one question regarding your comment "Just up the regulator and add a shit or two to the hammer spring and you are good to go." How do I add a "shit" or two to my hammer spring? lol But seriously what did you actually mean? Thanks again Bro, Tom
Stephen, Another awesome video Dude and your DIY stock is Killer to say the least! I realize that this video is a few months old, but I'm hoping that you will still see my comment. I am a little perplexed because you had mentioned that you were shooting the JBS Monsters (25.89gr.) at about 949 FPS, but you were shooting the Heavy's (18.13 gr.) at a high of 900 FPS. My Liberty is shooting the Heavy's at 920 FPS, but will only shoot the Monster's at 780 FPS. It' seems odd that my gun is shooting the Heavy's about 20-FPS faster, but the Monster's about 170-FPS slower than yours. Any idea why mine is shooting the Monster's so much slower than yours, but yet the Heavy's are shooting faster? Is it possible that you were shooting the Monster's on a different day with different regulator/hammer spring settings than you were using this day while videoing shooting the Heavy's ? Sorry for the long question, but as I mentioned I'm perplexed because of the strange differences. Do you have any idea what the best speed is for shooting the Monsters? How about the H&N Barracuda Match? Thanks again for the great videos!
Thank you Thomas! I have three guns each with an adjustable hammer spring tension screw. One of my guns is set to shoot jsb monsters at about 940fps. The reg is set high along with the hammer spring maxed out. The gun in this video the reg is set lower to 2100psi and I was adjusting the hammer spring tension for each pellet's perferred speed. I will be making slugs next month. I will try to find the best slug design and weight for these guns. Because the barrel is a bit tight I will make .217 caliber slugs. Thanks for the kinds words. I just made a third Sporter stock. I will post a new video showcasing all three stocks in made for the Nova liberty.
How are you doing Stephen I’m about to buy my first PCP I’m on the fence about buying one I was going to buy the gauntlet then I seen the great reviews on the liberty and very satisfied with the liberty but now I see iair Venturi has came out with the new gun called the avenger which gun do you think is better I have not seen any reviews on the avenger
Hi Adrian, the avenger does seem to be a little more feature-rich on paper it does have the externally adjustable regulator which is a big plus. However the smaller air tube is going to be a little bit of a problem if you want to shoot 25 cal. It might be okay for 22 + 177 cal. If the avenger had a larger air tube I would definitely opted for that over the Nova liberty. the Nova Liberty has proven to be a very accurate and reliable gun with one minor issue. The poppet is made of a soft material that might leak air if you tune the gun for high power. However there are many people making puppets for the Nova Liberty on the GTA forum. So, that problem is solved. you can buy the Nova Liberty from ATI and if there is any issue whatsoever just return it immediately. The avenger is supposed to come out midsomer but there are always delays. There are also unknowns about the avenger it is unproven an untested so far. And yes definitely stay away from the Guantlet.
I like my gauntlet it shoots straight has loads of power and alot of shots at full power still breaking it in shot over 1000 rounds so far and no issues
Yeah, that's what I was thinking but I was the range yesterday and the wind was out of control. 18mph at one moment and 6 mph the next. I had groups all over then when the wind dies down I have a 1/2 group at 50 yards and 1 inch at 75 yards. Its very windy where I live and shoot. I'm going to try groups the next day the winds are 5 mph or less
so you spent how much to turn a air rifle in to a .22 rimfire lol ? ps i have a Lithgow arms crossover that can pull off 1/2 inch groups at 100 yards i get air rifles in the UK , not everyone has a fire arms certificate but its so easy to get a .22 in the states i just dont see the attraction , and a 17 HMR will outshoot both .
The Re designed are not doing well for me in this gun. I have to wait for warmer weather to shoot at the max velocity of 950fps then I will know for sure. I believe Cloudio shot them at 965 fps successfully.
My brother from another mother Steve oh this is your buddy Jeff just the head scratcher trying to purchase another nova vista HP did they quit making them?
Yes, that generally is the object except when you are testing different pellets/slugs and looking for groupings. I may have been zeroed for one pellet but when you switch over to another pellet or slug and different weight your POI with shift and rather than re-zeroing the scope you just see if they group well.
I just started watching the video and i had to stop it and tell you how great of a job you did on the Nova love it....
Thank you!
Very nice shooting good groups for a windy day liking that nova not bad for price , I was out shooting my hatsan air max 22cal today 100 yards it was windy about 12 mph the 18gr jsb were every where 3 inch groups but at 60 yards quarter size groups on a perfect day nickel size groups , I enjoy watching your videos very much awsome
Thank you! Sometimes the winds can be very differet at 100 yards versus 60 yards. Thank for watching.
Air Velocity Sport . I agree
Phill: can't wait for the temp to rise a little 33* to shoot my Airmax.
Robert Kruckman , let me tell you it's got some major power pellet flying every where , I had to back up the hammer spring 1 full turn to lower the velocity to 910 fps with jsb18.13gr accuracy right on and it nickel groups at 50 yards on a good day , going to try 21 GR NSA hollow point slug but will have to crank up the power a little , may the weather will get better for you can get out and shoot your new air max 22cal .
Didn't know air rifles could shoot that accurately. Thanks for sharing all your hard work on modifications. I learned a lot along the way. Beautiful gun!
What a beauty! And she shoots so well!
Congrats after all that work, it shure paid off!
Thank you!
Thank you for showing actual, realistic real world groups. Flyers and all. Some other you tube videos get rather frustrating with every rifle shooting perfectly and every group under a half inch. Thanks for keeping it real. Appreciate your integrity, fantastic 100 yds. group! Great job on the stock.
Man Oh man I would give almost anything to own that airgun. What a beautiful sweet dream of a rig.
Awesome workshop 👍
Love your videos. I have learned a lot from you. Can't wait to get my kral Pitbull 25 out. We have 2 foot of snow on the ground here.
Thank you! I cant wait for warmer weather! Did you order from Troy Hammer? I'm talking with him now
No. I got the combo with the scope 3 mags and h&n pellets. I messaged him about a tune kit but he said he didn't have them.
Lady Liberty.... Oh my GAWD! Stephen!!! Dude!!!??
Ok Moving on LOL
I think they may be flying a bit fast, I think if you get them down around 880 FPS you may see those group tighten up a lot.
Thanks for braving the range and capturing the action. I for one know what it takes to run multiple cameras and sift through the piles
of video files to assemble one continual video for others to enjoy. I have to say, man, that rifle is absolutely gorgeous, nice job all the way around.
Thank you Hajimoto, that was my attempt tat being funny. Yeah lining up three cameras sucks but its worth it. It means a lot to me that you appreciate it. Thanks again.
Haji: Any thing U post I just kneel down and go Wow! Wow!
the million dollar question is: at 50 yards, Nova liberty or gauntlet ?
or NOVA FREEDOM WITH BUILT IN PUMP !
That's nothing to sneeze at!! Lady Liberty......HAHA! Nice. My question is are you just grabbing pellets out of the tin or are you washing, inspecting, weighing and head sizing? I would hope after all the time and work that you put into the Lady that you just wouldn't cram anything into her.......Of course your using quality pellets but, even the good pellets have to be cared for if your looking for even smaller groups. Haj makes a good point....and there's that 13 mph wind💨😫
Awesome, weĺl done,nice piece great review boss..😎
You put on awesome reviews buddy ..😎
The beautiful sound of rounds discharging
Absolutely amazing rifle great job I have the 177 version it’s stock but shoots incredible up to 4o yards it hangs with my fx rifles amazing job on the stock
WHAT A GREAT JOB..need I say more.
Thank you!
Stephen wow that’s a beautiful gun.
That stock turned out very nice!! Ill be starting the walnut stock next month. Im going for a similar look to the fx crown.
By the way, those are nice groups at 100 for 13mph winds. And 51 fpe is awesome. Cheers from Canada 🍺
Thank you! Just take your time and measure twice, cut once
DAAAAMN THAT RIFLE GIVES SOME SMAKE U COULD JUST HEAR IT HIT THE BACK BOARD 😋👍👍NICE WORK
Great job on your gun
However, at the start of the video, you mentioned that you did a range of tasks on the rifle, crowning, adjusting the reg, basically tuning,and so on and so forth. The thing is, not all of us have the gift and talent to tune our rifles that good. How I wish there is a rifle at that price range that shoots like that out of the box.
David, the nova Liberty and the air venturi avenger are extremely good right out of the box. I just really like to find time my equipment but it's not necessary.
Good impressive stuff , Shane uk 🇬🇧
Pretty impressive considering the conditions.
You should try slogs in it. Great finish on the stock. Wow!
I will in future thanks!
Im the same way I want hit bullseye all the time lol ...or I mean small groups ...but it doesn't always happen and I get frustrated bad 😆 it's the wind that's throwing you off ..but nice job I enjoy watching all your video
Hi Dude! Greetings from Brazil! I think you may be cocking the gun too fast, this valve takes some time to stabilise pressure. I think waiting around 10s between shots should be enough, and maybe you got a lower spread. By the way, this gun is awsome for the money.
Nice video. You did a lot of work on a budget gun and got it shooting pretty well. If you outlay a little more cash and buy a LW barrel for it I think you'll be amazed at what that will do to tighten things up. With the L&W you'd probably be getting .5-.75 inch 10 shot
groups with almost any of those pellets.
Thank you! Would you know where I can get a Lothar Walther barrel for this gun? Much appreciated.
Air Velocity Sport
Search bar Lother Walter down in Georgia. Bought barrels from them😎 this is ken Brown btw change my CZcams name but screw up the last part of the name have to wait 90 days to recharge it. I’m on Arron Cantrell Videos on CZcams. If you plan on shooting slugs I suggest a lw non choked barrel. Just measure the od of the barrel an order $122 shipped to your door👍🏾😎 the barrel is holding back the potential of your gun😎 night and day difference with a Lother Walter barrel👍🏾
I agree with Haji about lowering velocity to see how precision responds. The higher pressures required at you current settings are likely tilting a few pellet skirts at the muzzle. A line of sight camera with the sun behind you would be very telling on what is happening with those fliers. I suspect you would see some occasional spiraling.
I like
Great work on the stock. But I couldn't imagine walking in to a range with a pellet gun.
the gun is beautiful, cold temperatures will decrease the power in pcp, gas/vortex airguns , I'll keep it inside 50yards unless your a long range shooter ...100 yard groups aren't bad at all
Thank you!
You really made a beauty of the ugly duckling.
BTW , Even though this vid is a bit old, Great tune & Great shooting ! Especially in those harsh conditions. 38 with wind chill. Prob. about 30 or lower I bet. Thats pretty low to be out hob nobbing about for hours.
Why did you shoot your first 5 shot group with your thumb on the top of the stock? And did it make a difference in the groups?
IM GONNA LOOK INTO MAYBE BUYING A .177 BARREL FOR MY .22 NOVA FREEDOM AND MAYBE .25 OR .30 CAL ! EASY TO SWITCH OUT !
What kind of barrel are you planning on using for the .25 or .30? Sounds like a great idea
dont know yet i would make a educated guess i could even fit a fx barrel to this !if you get the dimensions right where they will fit i would assume they would work right ? i can tell you for sure that nova makes some very good barrels also ,100 to 150 yards i can consistently hit what im aiming at and a 4x16 scope helps also ! i am waiting for nova to possibly sell caliber change kit ,i have seen where the Seneca aspen just came out with the .25 ! .....imagine if nova came out with a .45 or better .50 cal that was like the nova freedom where you could pump with on board pump in the field and get the power of a umarex hammer ,wow !!!! how cool would that be !!! we are indeed living in awesome times and the airgun world is pretty amazing !
Hey my name is Zack I do leave in NY and own the gen 2 benjamin marauder in 22. supposedly wit Walther Lothar barrel but seems like I'm not having a good luck with the grouping at 30 yards which is strange. Anyway if you have a idea what could I try to make it more accurate. Without sending the gun to tuners and such.
I'd really appreciate your suggestions.
Thank you
Rifle looks beautiful. Question. Did you turn up the power for the barracudas? Because I noticed it wasn't much of a drop in power compared to the JSB'S 18.13s. And one more question did you build that stock on that rifle or was it purchased? You did a really nice job on the finish. I left a comment on your video when you were finishing your stock as to how I did mine. When you said wow e wow. You reminded me of Everybody Loves Raymond Ray Barone. You can definitely tell your from New York or someplace close back East LOL. Stay warm my friend. Looks cold out there. From New Mexico happy shooting brother.👍✌🇺🇸✌
Hey Rich, yes I turned the hammer spring adjuster up for heavier pellets and down for lighter pellets to keep them around 900fps. Yes, I've been told that I sound like Ray Romano. From Brooklyn. I wish I could go to New Mexico during the winter. Thanks enjoy the warm weather.
@@AirVelocitySport Thanks for the reply. I really appreciate you taking the time to make these videos and all your DIY's. It really helps guys like me take the guessing out of the game. I really do enjoy them. I'm a big air rifle enthusiast. Right around 890 to 900 fps is what I keep all my air rifles at. Stay blessed brother can't wait for the next video. By the way Ray Romano rocks. LOL👍✌🇺🇸
Do you shoot at meets? If so what gun do you use?
That gun is amazing! So do you think this is the gun for budget buyer? Thx
Yes, so far no major issues and great airgun right out of the box. No tinkering needed unless you like to tinker.
Nice shooting! What did you find was the best velocity range for accuracy with the JSB 18 gr and the Cuda 21gr pellets? Any idea what the twist rate is?
Thanks! Both Pellets at around 890fps and the twist is 18:1
Thanks! This is different than what Air Venturi told me for the Seneca Aspen at 16:1. I wonder if they are using a different barrel for the Avenger due to the greater velocity potential.
I pushed a cleaning rod to get my calculation. I could be off by most 1 inch. It could be any where from 17:1 to 18:1
Does that Liberty there have the same pot mettle receiver as the Avenger ?
Stock is awesome. Plz tell where u buy. Plz tell us. Very beautiful gun
what make and model of this pcp?
What scope are you using? Thanks
I use discovery, hawk and utg
your vids of making stocks are really out of this world, very informative, detailed and in my opinion def hardly anyone on youtube does any better.... but back to business...get of the bag and start free hand shooting :D
Hi. Not alone the the cold of air pressure ( unstable regulator ) play in to shooting also temperature of the barrel come in to focus !! And how hard or soft lead will be ! We all know air gun shooting is not longer what it was 20 years ago It is almost rocket science !!! :)
Yeah, can't wait to try again when temperatures get to 70s
Oh just a question another gentleman asked you where did you get that stock ? if you could list the other parts ? I'm really thinking about getting that gun!
I made the stock from a block of walnut I got from a lumber place near me.
This gun is pretty great right out of the box if you get the wood stock. Just up the regulator and add a shim or two to the hammer spring and you are good to go.
@@AirVelocitySport you had also mentioned you did a few things to the barrel?
@@AirVelocitySport Stephen, Bro you did one hell of a great job making that stock!!! You are the envy of the Nova Liberty clan my friend! I only wish that I had your artistic talents so that I could fab one of my own. Unfortunately yours is a God given ability that not too many of us share. I have found that unlike with mechanical/electrical skills, artistry isn't easily learned and you either have it or you don't. Thanks again for another great video on the Liberty, but I do have one question regarding your comment "Just up the regulator and add a shit or two to the hammer spring and you are good to go." How do I add a "shit" or two to my hammer spring? lol But seriously what did you actually mean? Thanks again Bro, Tom
Thomas S
He means shins or washers😎
Stephen, Another awesome video Dude and your DIY stock is Killer to say the least! I realize that this video is a few months old, but I'm hoping that you will still see my comment. I am a little perplexed because you had mentioned that you were shooting the JBS Monsters (25.89gr.) at about 949 FPS, but you were shooting the Heavy's (18.13 gr.) at a high of 900 FPS. My Liberty is shooting the Heavy's at 920 FPS, but will only shoot the Monster's at 780 FPS. It' seems odd that my gun is shooting the Heavy's about 20-FPS faster, but the Monster's about 170-FPS slower than yours. Any idea why mine is shooting the Monster's so much slower than yours, but yet the Heavy's are shooting faster? Is it possible that you were shooting the Monster's on a different day with different regulator/hammer spring settings than you were using this day while videoing shooting the Heavy's ? Sorry for the long question, but as I mentioned I'm perplexed because of the strange differences.
Do you have any idea what the best speed is for shooting the Monsters? How about the H&N Barracuda Match? Thanks again for the great videos!
Thank you Thomas! I have three guns each with an adjustable hammer spring tension screw. One of my guns is set to shoot jsb monsters at about 940fps. The reg is set high along with the hammer spring maxed out. The gun in this video the reg is set lower to 2100psi and I was adjusting the hammer spring tension for each pellet's perferred speed. I will be making slugs next month. I will try to find the best slug design and weight for these guns. Because the barrel is a bit tight I will make .217 caliber slugs. Thanks for the kinds words. I just made a third Sporter stock. I will post a new video showcasing all three stocks in made for the Nova liberty.
What baffles do you have in the shroud?
Also what is the id of this shroud
I'm not using any right now cause I made a shroud extension that works great. Not sure exactly but somewhere around .87 inches
How are you doing Stephen I’m about to buy my first PCP I’m on the fence about buying one I was going to buy the gauntlet then I seen the great reviews on the liberty and very satisfied with the liberty but now I see iair Venturi has came out with the new gun called the avenger which gun do you think is better I have not seen any reviews on the avenger
Hi Adrian, the avenger does seem to be a little more feature-rich on paper it does have the externally adjustable regulator which is a big plus. However the smaller air tube is going to be a little bit of a problem if you want to shoot 25 cal. It might be okay for 22 + 177 cal. If the avenger had a larger air tube I would definitely opted for that over the Nova liberty. the Nova Liberty has proven to be a very accurate and reliable gun with one minor issue. The poppet is made of a soft material that might leak air if you tune the gun for high power. However there are many people making puppets for the Nova Liberty on the GTA forum. So, that problem is solved. you can buy the Nova Liberty from ATI and if there is any issue whatsoever just return it immediately. The avenger is supposed to come out midsomer but there are always delays. There are also unknowns about the avenger it is unproven an untested so far. And yes definitely stay away from the Guantlet.
Air Velocity Sport ok thank you for the information
I like my gauntlet it shoots straight has loads of power and alot of shots at full power still breaking it in shot over 1000 rounds so far and no issues
U see? The barrel get warm , the pellets rising .
I'm wondering about the scope?? Groups that move around like that would drive me bat @&$: crazy
Yeah, that's what I was thinking but I was the range yesterday and the wind was out of control. 18mph at one moment and 6 mph the next. I had groups all over then when the wind dies down I have a 1/2 group at 50 yards and 1 inch at 75 yards. Its very windy where I live and shoot. I'm going to try groups the next day the winds are 5 mph or less
So this gun is regulated?
Yes
so you spent how much to turn a air rifle in to a .22 rimfire lol ? ps i have a Lithgow arms crossover that can pull off 1/2 inch groups at 100 yards i get air rifles in the UK , not everyone has a fire arms certificate but its so easy to get a .22 in the states i just dont see the attraction , and a 17 HMR will outshoot both .
How is thr 25 gr shooting 950 and the 18s shooting 900s ?
The Re designed are not doing well for me in this gun. I have to wait for warmer weather to shoot at the max velocity of 950fps then I will know for sure. I believe Cloudio shot them at 965 fps successfully.
They didn’t work in my Seneca Aspen also, but the JSB exact jumbo monster 25.39 works better not great but better.
My brother from another mother Steve oh this is your buddy Jeff just the head scratcher trying to purchase another nova vista HP did they quit making them?
Just to hit the black at 100 yards I am fine with that..
Take look at cattleman airrifle.you mit like it
Hello Air Velocity Sport I have some cool information for you how can I get in touch with you?
Finamn@aol.com
What is thi.
You start targeting with wood stock and end on synthetic stock.
Unable to understand.
The 100 yard was filmed earlier before I made the wood stock? It's in the video
Tonton balik om, di Rayhan hunter, Indonesia
But the trees aren't moving. So where's the wind.
I thought the object was to hit the bulls eye....
Yes, that generally is the object except when you are testing different pellets/slugs and looking for groupings. I may have been zeroed for one pellet but when you switch over to another pellet or slug and different weight your POI with shift and rather than re-zeroing the scope you just see if they group well.