I spent $300 on Amazon SOUND DEADENING for a Toyota Tacoma!... did it work?
Vložit
- čas přidán 15. 06. 2024
- In this video, we're back with another Tacoma mod! I sound-deaden a 2020 Tacoma TRD Pro with $300 ($200 of material used) of Amazon products! Let me know if you've done this to your vehicle, and what you think of my results.
Amazon Products Used
- Sound Deadening Mat (x2): amzn.to/3VcVlh7
- Closed Cell Foam (x2): amzn.to/4aAVsHw
- Roller: amzn.to/3VcV1ip
Other things I mentioned
- Dashboard mount insert video (iPad Mount): • How I Mounted Extra Sc...
---------------------
📱 More Content on my Instagram
/ chloekuotaco
🔧 My 2019 TRD Off-Road Tacoma Build
Video: • Building a Tacoma for ...
List: www.chloekuo.com/tacoma
💻 Merch on my Website
chloekuo.com/shop
💵 Discount Codes from Partners (brands that I stand by!)
- TACOMABEAST: "Chloe5" for 5% off
- METHOD Race Wheels: Link to get a one-time discount code www.methodracewheels.com/page...
- Sparks Parts (OEM Toyota Parts): "ChloeKuo" for 5% off
- Desert Does It Seat Jackers: Using my link will automatically apply a 5% discount desertdoesit.com/chloekuotaco
- DONGAR Technologies: "Chloe12" for 12% off
- TUFSKINZ: "ChloeKuo10" for 10% off
- Chemical Guys: "ChloeK15" for 15% off
- Cali Raised LED: "Chloe7" for 7% off
- Guild Outfitters: "Chloe5" for 5% off
- Etsy - LacunaSolutions: "ChloeKuo"
⌚️ My Watch (frequently asked about)
- Men's G-Shock: www.avantlink.com/click.php?t...
- Women's Baby-G: www.avantlink.com/click.php?t...
- Compass: amzn.to/3OZ8y8Z
---------------------
0:00 - Background
0:31 - The Problem (and Solution)
3:31 - Before/After Sound Tests
6:36 - Install
18:55 - Final Thoughts - Auta a dopravní prostředky
Did this on my 2019 ... I give the firmest hand shakes now.
Having done this, the doors make the most difference (with as complete coverage as you can manage on every surface without obstructing reassembly). After the doors, the back wall not neglecting to baffle the cab vents, then the roof then the floor. Make sure you get the rear corners in any accessible cavities.
As always… I enjoy your videos!! Thank you for the hard work and for being an advocate for the Tacoma World!
I would NEVER take this project on, but i watched it anyway because watching Chloe do things like this really intrigues me! Love helping her channel!!
Well thanks 😊
As someone in the car audio diy sound deadener is a must. Sound skins, and killmat is probably the best. It does help
I’ve always used dynamat, is it still around ?
@@mosthated8190 it’s still around but obviously other brands are now available for years dynamat was the only sound deadener available
@@mosthated8190 A quick google for 'dynamat' would answer that question.
@@mosthated8190
Dynamat still is one of the best. They got a new product dynamat xytreme pro. The best deadening in the market right now
@mosthated8190 yes, but Resonix is much better. Top of the line product
Now you can blast your Backstreet Boys and not drive the neighbors crazy 🤣.
Something like that 😂
I genuinely salute your DIY spirit, this seems like so much effort. Fun vid to watch though !
When I talked to the audio engineer who works on a luxury car, she told me use more foam mats than the sound deadening mat.
Tap on the metal panel, add sound deadening mats until the vibration from the panel is reduced. Then use the foam lined mats to create air pockets to capture sound. I tried this method and it worked well.
I did this to my Mitsubishi EVO X (used the same material as you did) - LOVE doing this mod and cannot wait to do it again to my taco and miata! One thing I do differently is I use a heat gun for adhering the material to the chassis and also wiped down surfaces with isopropyl alcohol with a microfiber prior. This is such a great mod though it takes a Corolla to a BMW. Would love to see you do the back and the headliner (roof) - it makes a good difference.
Absolute must and one of the first things I did to my taco. Night and day difference and I'll do it to every vehicle I ever get. Worth the labor.
I added the sound deadening materials in my gen 3 a few years ago. I included the back wall. There was nothing behind the plastic of the rear wall. I didn’t do the ceiling. What I found was that at 45-50 mph, there was significant improvement in the quietness. However, at highway speeds there was very little improvement. The wind noise could not be overcome. I would still do this again. Thanks for another great video. Best!
So true! As i drive mine home from the dealer, i couldn't stand the road noise. Thank you so much for this tip! ❤🎉😊
I planned to upgrade my speakers, so I went ahead and purchased the killmat. I just did the doors, and what a difference. Besides tapping on the door to hear the sound difference, closing the door feels solid. I'm very happy with this upgrade. Oh, and i didn't flatten the tiny square pattern . That killmat is sticky but manageable to apply.
Wow! That’s impressive and informative solution to a noise complaint for trucks. Enjoy your content 👍👍👍ℹ️
I think you've done a great job with the sound deadener. If you're into car sound system, sound deadener is a must. I used to into this kind of stuff when I was in high school back in the days. My friends and I always DIY our sound system in our vehicles with new amps and car radio? Back then Alpine car stereo, Rockford Fosgate amps, kicker and Rockford Fosgate speakers was our go to system. 😂
I added sound deadener around 4 interior speakers. I also added some foam in front doors to cancel out negative sound waves. I have a sub in trunk and added sound deadener to trunk lid and it made it sound way better. Great work on your install. 👍
Love the video! So in depth I’ve done the same to my taco just I have also done the engine hood, wheel wells, roof, back panels, and it does for sure make it quite nice to drive. Ultimately you stop noise from one area and notice noice from another. That’s why teslas have the double pane windows since wind noise is noticed more when there isn’t other noises to distract you from it.
I’ve installed upgraded sound systems in all of my cars. One of my favorites was Dynamat in the doors and around the new speakers. It increased the bass response/sound with deeper bass sounds. It helped quiet down the road noise a little but mostly used for that improved sound coming from the door speakers.
A couple years ago I did only the doors, panels, and hatch on my 4Runner and it made a big difference with the audio. Not sure about road noise since it’s still fairly loud but stereo sounded more solid. Also makes the doors feel solid when you open/shut them.
This is awesome, I did it to my Chevy S-10. It really made a difference, I did do the roof and back too.
Cld aluminum tiles with butyl backing are to prevent vibration and panel resonance. Not really designed for sound blockage with that thin aluminum sheet.
Closed cell foam as a whole isn't effective due to the thickness needed and coverage needed to have an improvement.
Mass loaded vinyl is what stops the sound waves from entering, cld tiles for resonance, and 3m thinsulate fiber mat for air space sound wave absorbtion.
A professional measuring microphone is needed for accuracy. Ipad and phone mics are terrible for this job.
Doors are the biggest difference overall.
These knock off companies on Amazon and online use toxic chemicals and materials for sound deadening FYI.
Second skin is the brand I go to honestly. They have a memorial day special.
Basically materials block sound waves or absorb them.
The stereo will sound better without that annoying door resonace.
This. Thinsulate
this is project number 3 on my list, then putting in new speakers in rear access doors. thank you for this, i appreciate you.
Keep in mind, the rear speakers in the 3g tacoma is severely under powered form the factory head unit. Go into balance setting and fade it all the way to the rear to highlight what I'm describing. New speakers alone are going to make no difference at all. You will need to run power from an aux amplifier to get any real sound out of the rear doors, factory speakers or aftermarket.
I did this to my Tacoma as well. I went the extra mile and added 2 layers on every surface I could. I also added some high density foam to the vents behind the rear seats. Definitely noticed a huge difference in the way the doors close and overall how the truck feels while I drive. I also noticed a significant reduction in road noise and wind buffeting.
Great vid! The knurled rollers helped me see where I rolled much better than the smooth one. I hardly used it after I figured that out
Thank you for your video, it definitely helped me out!! And I think that knurled one would’ve been SO much better and saved my arms 😅
I was thinking of going same thing to improve the sound inside my truck. Good job 👍🏼
Awesome video - been wanting to do this for a while
I did this on my '24 GMC Canyon AT4X....went above and beyond on the doors because of the annoying bass rattle on the driver's door (gone now). I used the extra box that I bought years ago when I did the same to my '19 Ram 1500...totally worth the time and money:)
I applaud your patience and working on your tried and true platform even though you like the upgrades to the new gen.
I just had my sound system installed…I went will higher end stuff…so sound deadening the doors and rear cab wall is the norm of the build…side benefits was a quieter interior…a lot less road noise…anyone going aftermarket with speakers and amps…this is a must…I went with Focal…Arc Audio and Digital Design…no use to spend all that money and have a noisy interior…
When I added the dynamat in a different vehicle, it took away the rattles when mounted at the speaker locations and behind them. It helps when added where subs are located but I didn’t notice any reduction in road noise. It just helped the audio system
great video, gave me confidence to do this to my 10th gen suburban 2500. one safety suggestion. anytime you are connecting or disconnecting airbags you should disconnect your battery first.
It may not have made a difference in overall volume from road noise, but you can clearly hear a difference in higher frequencies. I bet that makes a huge difference particularly on long drives.
I highly recommend deadening the roof before everything else, especially if you have a roof rack installed on your Tacoma. The roof makes a huge difference for wind noise. I also did the doors and floor, but those were not nearly as much improvement. Doing the doors also improved the audio quality inside the truck tho
Great job! If I may add my 2 cents... the ROOF. Remove the headliner and insulate that also, then reattach headliner. Your truck is new enough, but if you want to really go for it, replace the door seals/gaskets. Oh, and the rear seats backing, under the rear window. Other than that, there's nothing you can do about the sound leaking thru the glass.
I could see how only doing doors would be best bang for your buck
Finally, The first comment! Love your videos! Keep up the great work!
I love it! Thank you Chloe.
Awesome Chloe! I may do this and upgrade my speakers at the same time. How long did it take you to do this project?! I’d imagine a good 8 hours of work?
! I've Seen enough videos on sound deadening a Van to Know that you would not get much Benefit from doing the Floors. The Material would have made a Bigger Difference with the Back and the roof as you Stated. Also the adhesive Vinyl, if placed on the door skin in applicable areas and the Killmat on exposed metal on the speaker side would reduce the Sound "Leakage" to the outside. Also on that same point some better speaker Rings that "Push" the Sound Through the doorskin into cabin also do Great. The only Real benefit of doing the Floors is Better Temperature control for the hot or Cold Weather!
Nice install !!
Yeah I can’t wait to hear what it does
your vids are awesome 👌🏻
One thing I didn't see/hear mentioned was disconnecting the battery for safety if your seats have airbags as they can deploy when connecting/disconnecting the plugs.
Otherwise you did a great job!
Was wondering if you still had this Tacoma good video
I used Dynamat extreme in my 23 4runner, all doors and hatch, as well as under the body, especially where the spare tire is and the area from frame outwards
most dampening mats don't block sound, they prevent resonance from large sheet metal. The biggest bang for the buck are the doors exterior skin panels and ceiling. The floor is already loaded with sound deadening and carpet.
Great job!!!
So it’s a two layer process? First layer: sound deadening mat’l
Second layer: closed cell foam ON TOP of sound deadening mat’l?
Is that right?
Wish I had your energy.
Another point of view I know is that sound dampening with double glass. But it's difficult to find, usually people get double glass from another country market version or something like that.
I knew my 22 OR AC was noisy but driving down through Utah, Colorado highways was definitely crazy loud inside, no way will I drop the headliner but i think i am going to do mine it definitely couldn't hurt
I wpuld think do doors and rear wall. lol I bought supplies to do this over 2 years ago.
I did my cargo van with kilmat it works great.
I wonder if you did more layers of kill mat would it help, i.e putting two or three layers stacked
i been getting into the rabbit hole of tires. im curious, what do you think about the 255/80R17 pizza cutters? from what i read, there is a lot more functionality/pros vs wider meaty tires.
keep up the great videos. thanks
I recently switched to 235/85R16 (was 265/70R16) and it's worked fine on highway and poor surfaces so far.
I did my doors in the back of the cab I think it made a difference
Do you know the name of the song that starts at 1:32?
Great video! Btw. I did this to my car and only did the doors. Helped a lot with the sound system and some road noise. If I ever do it again I would do my roof next as that has the least amount of sound dampening I feel.
In my Tacoma the rear panel was actually the biggest difference for me. While you are in there ensure you "vents" are seated nicely and seal them up as well or you can get water ingress through there. The rear is a large piece of metal that resonates especially if you have a custom exhaust like I did. Nice work though. Only thing I used that you didn't was a heat gun so ensure adherence to the metal.
Agree. In my 1st gen Tacoma, the back wall rang like a bell with a modest 10" sub. There were ribs in the back wall to stiffen it, but it still vibrated with the sub.
Awesome job
good job. You only really need to cover about 20% of a surface to get the deadening effect.
Depending on what it is, I always tighten bolts to about 2-3 ugga duggas. I think that about equivalent to 1 gootentight. Please let me know if my conversion is off.
also remember to wipe clean the inside of your door before the panels because they can be very dirty if your truck is a little older.
I know you did this to eliminate some road noise, but did the sound quality improve from the speakers?
For the sake of time saving I would do the doors first, and possibly the roof, and then hear the result BEFORE doing the floor.
that awesome I gonna do this to my rig too
Liked and Subscribed. I’m in. 👍🤗
Add it to all the windows too. 😊
I helped a buddy do his Tacoma and the back wall made the most difference. He was afraid to do the roof.
For the doors, if you get a dent, the PDR guy would be pissed.
I once used a product called Brown Bread to do that to a 99 Mitsubishi Eclipse. It worked...eh...ok. Was a fun project though.
I missed the new car seat cover install😮.
Might be a good idea to disconnect the negative battery terminal before starting this since you are dealing with airbag connections.
The family in A quiet place really coulda used some of this stuff. 🤣
Its funny people complain about how loud the truck is, have never really been in a car that doesnt seal up well. Im looking at you Subaru, or been in a soft top wrangler at highway speeds. The Tacoma is fine. I mean it could be quieter, but its fine.
Will a under coat and fender well sound dampering spray will work?
Newer Toyotas definitely have some of the easiest interiors to remove!
Evaporator entered the chat.
Good idea if you’re also overhauling the interior anyway
great vid
may double layer the doors would help
My buddy did it to his 07 taco and it literally sounds like your riding in a 7 series BMW
Only thing I would had done differently is I probably would had wiped the metal with alcohol first.
I hate rolling the kill mat! I’ve tried knock offs that are way easier to roll but the kill mat is the only one I’ve found that is non toxic. In my experience, rolling it completely flat makes no difference to the end result of the sound, and with this stuff being extremely sticky, just do your best and it’ll be good.
Reading this made me feel better about myself 😅 I was struggling!!
@@ChloeKuo if you do this again in a different vehicle, instead of a roller, use the back of a screwdriver handle. Rub the killmat with it. Much more effective and quicker. You'll want a screwdriver handle with a nice rounded smooth end.
No need to flatten it out as it will settle down and stick over time.
Next time use a heat gun on the adhesive and a heavier metal roller makes it easier to apply.
Chloe - YOU are so CUTE! I love a woman that knows her vehicle and is not afraid to get her hands dirty to upgrade a taco to new levels! I worked in the original US Tacoma factory and I just love this mid sized truck!
I’m curious to see if people start doing this to the 4th gen or if Toyota finally figured out how to use sound proofing.
Every gen 4 I’ve driven is QUIET. I think the acoustic glass makes a huge difference. That truck does not need sound deadening in my opinion!
@@ChloeKuo glad to hear it!
Only difference is the doors sound solid., unless it's professionally installed.
Turn up the Radio!! 😂
Are those seat covers or stock?
how did u remember where everything goes back in :O
I’m paralyzed and I have a big van to get around in and the walls be going crazy I wish if I could do this
Doors and the back panel of the cab are the culprit
In my 4Runner the heat from the roof is worse than the sound from the floor.
Decibels are not linear
10 times louder is 10dB
100 times louder is 20dB
1000 times louder is 30dB
So the numbers may be close to each other but still could be much quieter
My taco is as quiet as a library compared to my wrangler 😂
I would''ve improvised and acquired more speakers lol
$300.00 with $20,000 worth of work 😂😂. I'll take the volume for free.
Hahahaha not worth it at all
I’m sure without reasonable doubt Chloe that the 4th gen,since arguably is the best Tacoma ever, will resolve this error! 👍🏻👌🏻
She got rid of her grey Tacoma for a trd pro ?
i thought the factory sound deadening was pretty good. interesting.
Holler if you’re interested in a rear seat delete. I’m on the forum🎉
Hey taking a door panel off especially on a Toyota you don’t have to remove the door handle
What head unit is that?