$69 Budget Stack - Speedybee F405 V4

Speedybee F405 V4: bit.ly/3t47zNo
__________________________________________________________________________
Support the channel by clicking these affiliate links when purchasing parts at these sites!
RDQ - www.racedayquads.com?aff=58
GetFPV - bit.ly/3RroJf8 (5% off Coupon - 0KC6D3YB02RN)
Banggood - www.banggood.com/custlink/v3G...
BetaFPV - bit.ly/3E07NbW
GEPRC - geprc.com/?ref=iJ5Pz1Je
Insta360 - www.insta360.com/sal/one_rs?i...
__________________________________________________________________________
Just getting into FPV?
This kit includes everything you need to get started!
bit.ly/3Denags
Frames
5”: RDQ Sourceone V3: bit.ly/3vCnPDC
5”: iFlight XL5: bit.ly/3wfgwTr
3”: Shendrone Squirt V2: bit.ly/3bu3zNQ
2.5”: Betafpv Pavo25: bit.ly/3Nhmet7
Flight Controllers
Mamba F7 MK4 Stack: bit.ly/3zUDPU9
Speedybee F405 V3 Stack - bit.ly/3L4SpMJ
26x26 (Whoop) iFlight Beast AIO: bit.ly/3oQ8KdR
Motors
Xilo Stealth Motors - bit.ly/3x7se2o
Emax ECO II Motors: bit.ly/34QovLv
HGLRC 3600kv Motors: bit.ly/3SnakRY
Digital DJI System
DJI FPV Goggles V2: bit.ly/3qfTEzr
Caddx Polar Vista: bit.ly/3tsqTSp
Runcam Link Pheonix: bit.ly/3eBGGJp
TX/RX
TBS Ethix Mambo: bit.ly/3L2kXGx
TBS Crossfire: bit.ly/3qnUKbZ
Batteries:
6s Tattu 1050: bit.ly/3ztaJJZ
6s GNB 1100: www.banggood.com/custlink/G33...
4s CNHL 650: bit.ly/3zUOFti
4s BetaFPV 750: bit.ly/3Sq8MXq
Recommended Budget Gear:
Controller - www.banggood.com/custlink/vKD...
Goggles - www.banggood.com/custlink/GKK...
Other Equipment:
Torvol Backpack: bit.ly/3zU9G7j
Electric Multi-tool: www.banggood.com/custlink/GDK...
Naked GoPro Hero 8 Case & BEC: bit.ly/3yuWjI5
DJI Air 2 S: bit.ly/3QERAfJ
GoPro Hero 9: amzn.to/349z9Ju
GoPro Hero 10: amzn.to/3ILPAyC
Sony A7iii: amzn.to/3QvV82L
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!

[@EagleFPV43]

Would the esc heatsink also act as a fire shield and possibly block interference?

[@teguhhophop]

Did u test blackbox fiture,While flying? Did the osd stuck in welcome logo like v3 while using sdcard blackbox?

[@MacklinFpv]

I had a speedy bee f405 v3 esc blow up on me so lets hope they fixed that with the new heat sink.

[@Loganmofficial]

I’m assuming that’s ur profile pic lol

[@nicolaetamasag3855]

Hi! I followed your videos and I'm very interest to build my first drone, but I have a question. What can I choose between seedybee F405 V4 and the ESC&FC from your video "How To Build a 7" Long Range FPV Drone"? What's better to choose?

[@seb-depp]

I want to know the same thing!

[@memelol7167]

Is this stack has burn issue?

[@Braincho]

Hi. What are those "Lumeniers"? 2nd pack of ESCs or something else... Isn't there ESC4in1 in the stack? Get confused a bit, would like some help, thanks.

[@TRONCATFPV]

Those are just motor wire PCB's, they are useful when you have motor wires that are too short to reach the ESC plus they protect the motor wires from prop strikes 👍

[@CharlyFLute]

Not related to this video, but if you could choose just one sub250 O3 unit drone, keeping in mind that you already have 5' and 7' inch one - what frame it would be? Thanks for help

[@morganpeters7285]

Check out the quadmula siren f3 split

[@CharlyFLute]

@@morganpeters7285 it is not a whoop

[@carlosbetancurt1920]

I'm planning to buy a new fc for my 5" build. I'm deciding between t motor f7 pro or speddybee f405

[@rolandomota7474]

What's the price diff?

[@TRONCATFPV]

Two solid stacks.
I'd recommend checking out the speedybee F7 stack. It's a good middle ground between these two. You get the benefits of the F7, still has built in Bluetooth, and is priced right in the middle 👍
I put one on a cinelifter recently and it performs awesome.
www.getfpv.com/speedybee-f7-v3-stack-f722-fc-50a-blheli-32-128k-esc-30x30.html?&afid=rm9afbOlyytOYIPZ&referring_service=link

[@VALORANTDEVIL]

Is it compatible with inav

[@memelol7167]

Is this v4 stack has noise problem?

[@Sonic_Ox]

Is this stack suitable for BOTH analog and digital vtx builds?

[@tango5814]

Yep

[@chepeni]

What is the lumenier thing over the arms?

[@TRONCATFPV]

Those are motor PCB boards. They prevent the motor wires from getting sliced by the props and make motor swapping very easy 🤙

[@Howtomake12261]

Nothing pisses me off more then loud ass intro music to ear rape me, but otherwise grate video.