Nice job on the flat bed. Did one on an old square body Chevy with dual tanks. I always thought it was a dumb idea to have a filler on each side, so I routed the filler on the right side over to the left side. That way the owner could fill both tanks from the same side.
Definitely a well planned out and built flat bed. Can't go wrong with stake pockets and rub rails. I build all my trailers with them. So much more versatile.
@@nauvooacresif the treated ever wears out, look for reclaimed flooring from semi trailers. I have a major trucking company near me that sells it when they scrap trailers.
Great fabrication work. I appreciate the jigs and head scratching. Do you have a slight tremor? If so, your fabrication and fitment is even more impressive.
I'm looking to modify a hummvee trailer bed for my 1st gen tacoma. The width seems almost perfect, I'll have to have it shortened so finderwells will line up with the tires. Will have to see how it goes
Sides are 3x6, inner is 2x3 and headache rack is 2.5 square. Everything was .120 wall. I wanted thinner for the 3x6, but couldn’t find it. Thanks for watching!
штош. По порядку. Доску не обработали, а положили как есть. Странно, но допустим. Хотя для меня такое недопустимо. Над качеством сварки нужно ещё поработать. Но если заказчика устраивает, то кто я такой, чтобы судить? Было потрачено много лишнего металла, но если художник так видит, то и ок.
The boards are pre milled and pressure treated. I plan to treat them once they dry out. I am my own customer. I built this for myself, and have no intentions of building them for anyone else. I’m not sure what you are referring to with wasted metal. Thanks for watching!
One of the best flat bed build I have seen on CZcams ! 👍👍👍👍👍
Thank you! Quite the compliment. Thanks for watching!
Nice job on the flat bed. Did one on an old square body Chevy with dual tanks. I always thought it was a dumb idea to have a filler on each side, so I routed the filler on the right side over to the left side. That way the owner could fill both tanks from the same side.
Thank you. Makes good sense to route them to one side. Thanks for watching!
Nice work! The only thing I would have added is a disappearing gooseneck ball mount.
Thought about but, I have yet to haul a gooseneck, and wouldn’t be able to get one up my driveway due to how steep it is. Thanks for watching!
That is a FANTASTIC bed!
Thank you! It was a fun and challenging build. Thanks for watching.
Sir, You have done a fine job, A Propper job,
Built strong, Made to last!
Thank you, and thanks for watching!
Definitely a well planned out and built flat bed. Can't go wrong with stake pockets and rub rails. I build all my trailers with them. So much more versatile.
Couldn’t agree more. Thank you, and thanks for watching!
Just started the video and the first goofy song actually made me laugh, that was good shit 😂😂
Thank you, and thanks for watching!
Very nice!
Thank you, and thanks for watching!
Once that treated lumber dries up, you should look into staining it. Personally think a dark brown stain would look great.
That is the plan as I want to keep it from turning gray. Thanks for watching!
@@nauvooacresif the treated ever wears out, look for reclaimed flooring from semi trailers. I have a major trucking company near me that sells it when they scrap trailers.
Nice! Very well thought out. I like the stake pockets and rub rails!
Cheers
Terry
Thank you, and thanks for watching!
Really nice build mate. Well done. Good to see the mental gymnastics going on a couple of times 😂😂. I know how you feel. Cheers
Thank you sir! Yes, it was quite difficult at times without actual plans. Thanks for watching!
That's a bloody great job well done.
Thank you, and thanks for watching!
Great fabrication work. I appreciate the jigs and head scratching. Do you have a slight tremor? If so, your fabrication and fitment is even more impressive.
I do, mostly comes from blood sugar issues. Thanks for watching, and the feedback!
A new subscriber here... just WOW, what a beautiful work!
Thank you, and thanks for watching!
Nice f n job! I'll buy one
Thank you, and thanks for watching!
I'm looking to modify a hummvee trailer bed for my 1st gen tacoma. The width seems almost perfect, I'll have to have it shortened so finderwells will line up with the tires. Will have to see how it goes
Good job
Thanks for watching!
@@nauvooacres How we could contact you? Thank you very much.
Nauvooacres@gmail.com
Well done.
Thank you and thanks for watching!
Very nice work sir
Thank you, and thanks for watching!
awesome new metal bed for ur truck. cheaper than a new bed..
Way cheaper than buying one from a manufacturer. Thanks for watching!
Nice
Thanks for watching!
Located near pa?? lol my 1st gen tundra needs a solid flat bed for work! Nice job man. Super clean.
Indeed. Thanks for watching!
@@nauvooacres you are near pa?
Yes, I am
I've heard that intro tune somewhere before, just not sure where from.
It was just a royalty free song I found somewhere. I’ve heard before on CZcams videos as well. Might be time for a change. Thanks for watching!
Nice work! What was ballpark total fab time?
About 80 hours. I worked on it over 6 weekends, not quite 8 hours a day. Thanks for watching!
Awsime job! What was approximate cost?
Thank you. I’m going to say about $1800 in materials.
What size and thickness steel did u use?
Sides are 3x6, inner is 2x3 and headache rack is 2.5 square. Everything was .120 wall. I wanted thinner for the 3x6, but couldn’t find it. Thanks for watching!
@nauvooacres thank u! And really thought it was a great job!
Hi Do you interested in adding some LED upgrade to your rig? We hope to do some sponsorship with you!
You are welcome to contact me at nauvooacres@gmail.com. Thank you
@@nauvooacres Sure! We just send the details. Hopefully would be able to chat more about our sponsorship!
@@nauvooacres Hi Just curious if you see the message l send:)?
I did. I will reach out next build
@@nauvooacres Sure No problem! This would happened maybe in the next couple months?
штош. По порядку. Доску не обработали, а положили как есть. Странно, но допустим. Хотя для меня такое недопустимо.
Над качеством сварки нужно ещё поработать. Но если заказчика устраивает, то кто я такой, чтобы судить?
Было потрачено много лишнего металла, но если художник так видит, то и ок.
The boards are pre milled and pressure treated. I plan to treat them once they dry out. I am my own customer. I built this for myself, and have no intentions of building them for anyone else. I’m not sure what you are referring to with wasted metal. Thanks for watching!
Jeez what awful music