Tesla Dirt Bike Gets Upgrades | Razor MX650 to MX3000 Electric Pit Bike
Vložit
- čas přidán 15. 08. 2021
- Check out the build video! - • Razor MX650 to MX3000 ...
I installed new handlebars, throttle, brakes, and rear sprocket on my Razor MX650. I also fabricated a battery box for my 3, 20Ah 6s lipos. Bike now hits 45 mph and still has amazing torque.
DO NOT TRY THIS AT HOME - Věda a technologie
For a couple hundred bucks you can get a mountain bike shock for the rear that will greatly improve your ride. Less crashing more control
That's sweet! I was hoping for an update/upgrade video :)
Pretty cool build. Keep up the videos.
Nice update, your original video inspired me to do a build. I went 48v and 2000w motor, skipped the Kelly Controller for now but it's still a huge upgrade. I'm using the same batteries except they are 14AH, two in series. I have been thinking of how to do a battery box, so thanks for showing how you did yours for ideas.
I’m looking to do a build as well , I have some mini bikes and a pocket rocket , where did you order your parts from ? Got any tips or
Tricks?
@@mikeklevenz997 Hey man, I just ordered a 72v 3000w Kit from aliexpress.
@@SharkTheatre did it come in yet?
Sick burnout bro
Great work. I assume with the high end cars in your driveway someone taught you how to work with tools at a young age. So very smart. But when we are young we can be a bit reckless. Just be careful 45mph can really hurt or worse.
Stay safe
Gave you a sub! Great build. It inspires me to make more videos in my channel!
You definitely need to upgrade the tires, I have 16x3 and a 10x3 on my Mx650 w/ 48v 2000w and the tires changed the bike completely for the better, they are balanced street tires that perform so much better on pavement at speeds above 30 mph.... Also I can post a shock and fork upgrade kit that will eliminate that risers for the handlebars and make it look stock and can hold a 250 lb person on jumps, there's even a guy that makes headtube cups so you can fit pitbike forks but it's alot easier and cheaper to do the fork spring upgrade. Nice work on the battery box but you might want to get some edge protection for that sheet metals it doesn't scratch the power cables... I've seen bikes explode in the middle of the woods because of frayed wires so be careful bro, you already crashed once, and trust me, you don't want to crash and burn. It hurts more.... LoL
Upload a video
What wheels did you use exactly? And how did they fit (how did you do the conversion from the stock sizes to wahr you have now)
Please tell us where to get the headtube cups. I've got the longer springs/bolts and they certainly help, but the fork on these bikes is pretty bad. It's especially bad for us fatter and taller riders.
This is the better way to do this, you can get kits for around $1,400. I got a motor, speed controller, twist grip,battery and a new rear shock for around $950
Where ?
Amazon
@@paper9570 🧢 link or it didn’t happen
Porsche 😍
Hi does the batt get hot in that box?
Hi bud love the bike
Are you using any sort of bms or fuse/ circuit breaker of the battery's
Nope. Don’t need a bms for 3 separate batteries. I just balance them once in a while
Hey I was considering this motor kit, do you think it would be powerful enough for a lightweight electric motorcycle/moped?
Definitely
Hey bro, im trying to mod my MX650 the exact same way you did and I got the KBS and the 72v 3000w motor but im wondering if you have to get only one Turnigy High Capacity 20000mAh 6S 12C Lipo Pack w/XT90 from hobbyking or do i have to make the quantity: 3?
You can get any battery you want. I already had two of these batteries so I just bought another for 72v. If I were you, I would custom order a Lithium Ion battery (lg or Tesla cells)
Have you ever considered a better front end? Better front forks? Maybe increase the wheelbase at the same time?
Definitely, real pitbike forks are a consideration.
Hey. How did you wire the charging port on this build? My controller doesn’t label which one is the charging port
I actually charge the batteries separately. They are RC batteries so I have to take them out and charge separately.
What is the new throttle that you bought called?
www.amazon.com/gp/product/B07DB5K4WK/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
What battery’s are you running in series and can I get a link to boy them?
They are Turnigy 6S 20,000mAh hobby grade batteries. I actually do not recommend these as they get out of balance quite fast and are very expensive.
Great build!! What exact controller are you using? I know it is Kelly's but which one? I presume that it is way better than these chinese could which come with the motor right?
It is a KLX 120A 72V model. I reference it more in depth in my initial build video as well.
anylink for the motor and batteries ect i wanna replace my broken 2stroke motorbike motor with this
Check description of my build video for this bike
This is an awesome build. But is there a link to the parts so i can do this with my MX650?
Check out the build video!
I have a razor Dirt bike 48v 3000w 72 controller has three speed and am working on putting a turbo my bike hits 50 60 mph
Parts list?
I have the throttle I mean its what you should probably expect for a 12 dollar throttle it does give me blisters and it a annoying but other then that it pretty great
ours do like 22 mph with just over voting to 40volt batteries I don't trust the tires at any higher speeds but great job man!
Thanks! I think it’s fine to go over 22mph. But I’m the same guy who went 60mph on a bicycle so
Hey nice video. I’m wondering would a qs 138 motor fit a sx500?
I was actually just researching that. Not sure. It would definitely require more fabrication work.
@@AllThingsElectric_ alright thanks for the response. I’m interested in getting a sx500 to mod. So I’m looking for the most lower I can get. Love your videos btw.
@@AllThingsElectric_ Ok so I'm actually going to just get the 72v 3000w motor kit from aliexpress, decided not to break the bank. I got a question though, would a sabvoton work with one of these motors?
I have a 48v 1800watt razor mx500. It does solid 35. Any idea how to make it go 40-50?
Geht ab battery with more voltage but you have to make sure that the capacitors of your controller can handle more voltage
Def try to re-gear it. My bike did 35 before I changed the gearing. I got up to 45 now.
@@AllThingsElectric_ what is your current gearing?
Don't trust your current key situation lol would be pretty easy to cut both wires twist them together and ride away with no key...
Something to consider, thanks man.
Holy shit you’re hauling
Can you make a video on key relocation?
I can include it in the next one
I'm thinking of doing a 72v 3000w setup with 6 12v 7ah dewalt battery what do you think 🤔 ????? What do you think the best way to wire 6 batteries for this type of application
Personally, I would go 72v 7Ah. Series wiring. Ideally you want more Ah, but 48v is not an option with 6 batteries.
@@AllThingsElectric_ or should I do 8 parallel 18v 5ah
@@Jb_outdooradventures do 4s2p so you have 72v 10ah
Want atleast 35ah max 45ah
@@Jb_outdooradventures that's gonna be expensive if u don't Wanna build ur own pack with individual cells or lipos. U would need a 4s7p config with the 18v 5ah battery's (28 battery's) so very expensive. I'd recommend you search for pre-built 72v pack on the internet
Hey man, what gearing are you using
11 tooth in the front and the rear sprocket is from a Razor Pocket Rocket. Not completely sure on the rear tooth count.
Where’d you get that rear shock?
It was on the bike when I bought it. I think it’s an 8 inch shock. Probably on eBay or Amazon.
@@AllThingsElectric_ alright cool. Just saw it was raised a nice amount and wanted to do the same
Link to the volt meter por favor
I pulled it off of my old throttle
Where u at In Tennessee bro I would love to have one built by you bro.
In GA homie. Might be able to ship.
@@AllThingsElectric_ you got Instagram?
I'm wanting to 72v a m650 but I wanna beef it up for a big man 400+ lbs suspension
what is the sprocket set?
The front is 11 tooth the rear is from a razor pocket rocket.
@@AllThingsElectric_ will the top speed increase if you put a 15 tooth front sprocket
@@michaelslivinskiy7768 Yes it will.
What’s the batteries called
Turnigy 20Ah 6s
what battery's is he using
Three 20Ah 6s lipo batteries
How did you break the breaks and the throttle?! I was thinking buying this type of throttle with the key, for my future 1500w e bike. How do you manage to break it?
I crashed the bike lol. But before that, I had so many issues with the throttle. Faulty hall sensor twice
@@AllThingsElectric_ Ouch, that must hurt. Maybe not all the throttle has the same issue, I'll buy it and test it . If I have problems I'll change it with the original.
Where do you get the 3000 from
3000W motor
Stock is 650W
Amazon sells a few kits eBay you will have to make two holes in the frame for the heads of the boltson the motor it just doesn't quite clear the frame but super easy.
I need one dirt plz
-him drivng by the police: they say: hm I wonder if it’s real HOLY SHIT ITS REAL
I have it
Has Peachtree City said anything to you about riding it yet? How far can you go on a charge with your upgrade I've got a yellow 650 but it's got the stock motor but I upgraded the batteries from a 12 volt 12Ah to 12V 15Ah. I had a speedometer app downloaded on my phone and according to it I got mine up to 21.6 mph max speed
About a 25-30 mile range on this one