Rebuilding my GM 4L60E Transmission!
Vložit
- čas přidán 10. 07. 2024
- In this video, I show you how I rebuilt my GM 4l60E transmission. It's not meant to be a detailed DIY, but more of an overview on what to expect and tips/tricks that helped me along the way. Below is a link to my video of me removing the transmission.
• How I Removed my 4L60E...
Please comment below if you have any questions or feedback, which is greatly appreciated. In the meantime, please also like and share the video and subscribe to my channel as I embark on my CZcams journey!
Tools Used:
Spring Compressor: www.amazon.ca/gp/product/B0B7...
Torx Plus 50IP Bit: www.amazon.ca/gp/product/B00G...
Parts Used:
Overhaul Kit:
remco-transmission-parts.com/...
Low & Reverse Clutch Spring:
www.amazon.ca/gp/product/B001...
Overrun Clutch Spring:
www.amazon.ca/gp/product/B001...
Valve Body Spacer Plate:
www.amazon.ca/gp/product/B001...
Input Sprag:
www.amazon.ca/gp/product/B071...
0:00 - Intro
1:12 - Overview of the Parts
5:04 - Output Case Internals
9:22 - Shift & Input Drum
11:04 - Rebuilding the Pump
11:56 - Input Case Internals
12:52 - Bottom of the Transmission
14:45 - Shift Servo
14:57 - Transmission Externals
15:30 - Outro - Auta a dopravní prostředky
I'm gearing up to do mine right now. Your video was pretty straight forward informative. I'm in Texas, but understand Canadian quite well , lol. Good content buddy.
Thank you very much! I've put around 1000 km (64 miles) on the truck, and it's still working! If you haven't found it already, here's a more detailed video I used for my job. czcams.com/video/3O0vGfiQ7EI/video.htmlsi=zjTHdG34SZRvy-cY
Haha the coffee comment got u a like and a subscribe
@goingb Thanks, Brother. Stay tuned for some more DIY and flip videos!
man I wish I saw this video earlier. So much conflicting information online. Ended up installing the low reverse piston wrong and as a result couldn't get the parking brake lever in. Had to take it all apart again and reassemble lol. Almost done with the rebuild. will see if it works on the weekend.
@@arsenbassenov1685 Thanks for commenting. Good luck this weekend!
thanks mate i'll be doing my 06 hummer transmission asap as well, cheers
No problem. Below is a link to a video that helped me do mine. Let me know if you have any questions. Good luck!
czcams.com/video/3O0vGfiQ7EI/video.htmlsi=WhgiRSpHxSj7GQJN
It was a good video for watching after viewing more detailed ones. I'm about to rebuild mine with 225k on it. It works fine, but I want to know I can travel coast2coast. Upgrades for towing are on my list of parts. Fortunately, I bought my 07 TBlazer for less than 3k from original owner, that happenedto own the local Chevy dealership... so spending 5k to totally refresh all parts ignored is ok.
I was surprised you did not use some type of band clamp to perfectly mate the pump halves. Now to search for your follow up vid
@@davepetrakos1192 Thanks for watching.
While it is obvious there was minimal transmission experience, it is a wonder this transmission actually worked.
@@gearshifterg9756 Thank you, sir. I will take that as a compliment!
@@RegenAutomotive There is a need for transmission builders. Just from what you have shown, a transmission shop would hire and train you.
By the way, trying to reuse that original forward sprag would have been a mistake. Going with the hardened Borg Warner sprag was best.
@gearshifterg9756 Thanks again. I appreciate the kind words! Rebuilding a transmission has always been a bucket list DIY of mine. Next, I am going to rebuild an LS engine and play around with a custom engine stand and tuning. So, stay tuned!
Nice work!
Thank you very much!
Can't wait for it to be dropped in the Yukon!
LOL. Hopefully it works 🤞
i want to see if it works
You bet! Here's my video of me installing and testing it: czcams.com/video/biRDQhGKx6A/video.htmlsi=0IKqBF36dhg2-eo-
Is that a Blackstone hat?
Yes lol