1000+ horsepower turbo 4.6 2v first start
Vložit
- čas přidán 1. 06. 2019
- Instagram: @thturbo2v
Apocalypse Performance- apocalypseperformance.com
Modular Head Shop- www.modularheadshop.com
Custom Spec Cams by Todd Warren NA SVT Cams: / nasvt
cage install and fab work by Rusty Olson at Boars Nest Fabrication: / boarsnestfabrication
Transmission Built by Cameron at CPR Transmissions - Auta a dopravní prostředky
The cobra’s big little brother lol
This is what I have notifications on for!
what an amazing couple of months watching you put this motor together, kick some ass 🤙🏻
I did a similar build 6yrs ago on my 2V. I used MMR'S 5.0L STROKER, MMR fuel system, Elderbrock Victor Jr. Intake, Twin turbo kit from HP Performance (2 - 50mm t3/t4 hybrids). Trick Flow Heads with MMR Stage 2 turbo cams, MMR 8 quart oil pan, Cloyes timing gears, Pro-M MAF sensor. Accufab throttle body. SCT handheld tuner.
***Anyways, the car made 725rwhp on 18psi due to a mild initial tune.***
I went through 3 tranny swaps before finally getting a TKO 600, but I could never keep a clutch in it for long, and the shifting was really knotchy. I never hooked up the 2-step, but the car went 11.20's at 126mph on foot brake.
I had it tuned on 110 octane fuel.
To make a long story short, my new wife and I were expecting a baby boy, so I sold the car for pennies on the dollar.
czcams.com/video/-ZltQLnbmEo/video.html
😪😒🤧
Hey man, from one joy to an other.. congrats brother..
@@anthony1bad351
Thanks my Brother! 😎👍🏼
Sounds awesome Andrew great job. Love that idle you can hear the Eagles sore
hell yea! nice to see it running again, 7 seconds or bust!
Congrats, brother.... Exactly how I imagined it !!! Now go and enjoy the f..k out of it..😀😀😀 and again...Thank you for sharing all this 2v heaven with us.!! Much appreciated.! 😘
Yes!!!! She runs again! I know that's a good feeling and I'm happy for you brother!! Cant wait til shes dialed in and is able to hit the track
That's badass. Sounds great. Once you got your block you've been getting it. Thanks for making time in the middle of this mad thrash to make some videos.
Damn this thing sounds insane!!! I can’t wait to see how much power it makes and how much faster it’ll be now! Great job!
Great job bro, your channel is gonna blow up, not enough 2v luv out there, cant wait to see this car kick some ass again.
When you take the biggest underdog of an engine and make it better than then almost anything you will pull up next to at the red light. Props for this build its badass!
Very happy for you Andrew ( and family ) . It took a little longer than you wanted , but I think you will be very happy with this combo. Best of luck to you , and can't wait to see you send it for real.
Glad to see it all worked out in the end!!!
Beautiful. Been following for a good while now just beautiful.
Glad to see and hear this beast going fri I'll be at track first time in long time but 4.6 2v all the way my friend
You have no idea how long I have been waiting on this video.
Congrats buddy!
Go kick some ass on the track now!
Every time an old vid pops on my recommendation I just gotta watch it again 💯
Great stuff man, can't wait to see you make some runs in it.
Holy cam!!!! glad it's running!
Omg. Just listen. One of the meanest sounding little motors
Stubborn but strong! Good Luck my mustang brother.
Congrats on getting the car running!
Love the setup design. Nice work.
Congratulations! Sounds like HEAVEN!
What a relief it must be to have that motor in and running!! 7's 4-SURE!
I haven’t watched your other videos but sounds like Sergio is a good friend!
Congrats Andrew for the 1st startup after having the engine all together. Can't wait to see it at the track and breaks 7's seconds.
Looking good man cant wait for another video to drop lol
After all the hard work and heartaches she is finally running
Sweet !! Never sell it. Drive and enjoy your hard work. Thanks for taking time to share it with us. You just don't see this anymore.
The competition is now on notice!
Sounds great man.love it sweet set up
Awesome!!! Way to go Brother!!!
Can’t wait to see it at the strip .sounds great 👍
Been watching you build this monster! I Love it. I have a 01 GT on an 0n3 single making just over 500 to the wheels and your car/channel motivates me to keep going cause i see what my car could/will be! Keep up the work man and go kick some ass!!
Engine mods?
@@QZPZ yeah I have forged rods and pistons
God damnit, now I have to finish mine.
Sounds and looks good...curious to see how fast that 2v will go
Cant wait to do mine man.. Sounds like a beast!!!
Very nice Andrew
Been watching you and this car proceed through your ongoing addiction.
And it's lovely
And ma'am
12 o'clock at nite
Is the best time for that kinda noise
Showing the world the 2v can hold power
Car sounds awesome just took a little while for the lift is the pump up and it was real tight fresh motor but it sounds awesome
Sounds bad ass. Love my 4.6
Liked and subscribed for this build. Great looking car sir
Sounds good man!
Sounds like an animal! Mustang lifestyle needs to take some 2v notes on this build!
7:50 “good thing I’m deaf in that ear already goddamn” 😂😂😂😂😂😂
just watched this whole build. Have same engine in my 03 f150 going to attempt the same build
i like this, keep it coming
2V FTW!!!🔥🔥🔥
What a beast! I plan on getting one but only putting about 400 to 500hp
Wicked brother 💪👊
BEAST MODE ENGAGED!!!!
Sounds great Andy, no smoke.....get a few dozen easy miles on it, after the oil change it's time for the track.
Nice man!!
2v too the front great video hope to see you do some no prep racing
That’s so awesome that your wife is out there helping you that’s your soulmate that’s what I’m looking for Still haven’t found one
That's the only one I have ever seen. Rare creatures they are.
Man, i thought you looked familiar. I went to middle / high scool with your brother devon
Congratulations
Inspiration certified💯
good video my brother i got 2004 maruader i cant wait to do my engine
Your girl is awesome buddy a keeper for sure.
The beast has been awakened! The engine sound good! Happy for you man! Now time to tune and start the LS diet! Hehe😬
You barely have a single factory part in an ls to make 1k...
I really do not have a single factory LS, Reason is I don’t like LS engines. Don’t have nothing against them.
@@CarlosMontalvoGhigliotty i am more fond of modern engines.. The LS is a cheap engine in every facet.. The ancient design is not desirable to me at all either.. But im working on acquiring a barra anyway..
Nice, doing my 4v here shortly
Long live the 2v!
Good to see something else other than LS.
Congrats
Dam that mustang is clean asf
All I can say is wow!!!
Wow goals bro I’m trying to do that to my 4.6 to
💪👹 ITS ALIIIIIIVE!!
Weautiful 2v ford power baby✌💪💪💪
Sounds bad ass
NICE JOB! Bet the neighbors love ya lol
Congrats on this build I'm working on a 2000 GT with a vortech blower not even close to the power of this bad boy. Time to smoke all the 2v doubters.
Build the bottom end and you can bruh
Beast.
Great job, your wife’s quite the trooper also.
Nice
Best 2v
Brother you had your comments off on the engine building video. I NEEESD YOUE HELP BRO!!!! WHAT lift plate did you use to mount your teksid block to the engine stand
You do nice work! What provisions if any did you have to do to use the teksid block? Thanks!
Whoooo 🏁🏁🏁🏁
Hey man I have a 2000 mustang 2v as well. Everything stock. I need to know what the 1st mods I need ? Any advice? Should headers be 1st ?
Oh my my my.
Sir if you started that crap in my neighborhood at midnight?? You’d have one extremely crochety old man in your driveway in his underwear and boots,,, handing out beer!!! Lol. Funny thing is, I probably wouldn’t be alone. Congrats!!!
I’m looking for a cam option and if you have any insight on how to find a good option I would appreciate it. It’s a 4.75 stroker long block by MMR. Has Steve 3 nitrous cams, stage 3 ported heads, P1sc and stock intake. Any direction for me? I’d like it to move a lot of air with higher rpm. The tire burning tq is less appealing as riding out a gear and putting you in your seat.
I wanna do a similar build to my 02. Saw you machined the block but is that the stock block and did you have to cut the subframe. Trying to keep the body in tact as much as possible in case I ever want to put it back to original.
What intake manifold is that? Never seen one that has the throttle body going straight? Love the build too!
I just bought a cheap 93 Lincoln Town car and it has the 4.6 2 Valve and I'm thinking about to turbo it like your set up. What would you suggest I do or don't just lmk.
Dear Jesus God it sounds glorious 😍
Any tips or procedure you'd recommend for seating rings? Finally getting close to starting mine for the first time
Heck yeah!!! The quest for 7’s is on baby!
Fuck it sounds so good 😭
You moved all the reservoir tanks and battery to the trunk?
"good thing I'm deaf in that ear already goddamn"
I always wondered if it's the same engine as the 03 f150 4.6
How you do to delete the maF sensor? Buddy
Did you have your cylinders sleeved? If so what is the bore size?
If you ever need help with anything while I'm home on break let me know. I'd love to see the car and help out of I can.
How did you learn how to do this sort of thing?