How much horspower does my Turbo 2v make?
Vložit
- čas přidán 13. 10. 2018
- Cruised out to Titan Motorsports for the local Clarksville Car Guys dyno day to see how much HP I could put down in the turbo 2v. Met some really cool people and hung out with some old friends. Met up with Alex Lista from Spooling Up Performance who was sponsoring the event yall go check out his Channel / aplista1790 . Boosted Vert AKA Jeffrey Budd rode out with me and got some really good video so go check that out on his chammel / @boostedvert
- Auta a dopravní prostředky
maaan below 900 and making 8.65 et, that is super efficient car. love results, keep us updated.
Mohd LX thanks hoping to go 8.5 in cool air
That’s proof the 4.6 2 valve can with stand over 700hp with mods !! That’s impressive
Adrian I-Mustang that’s not that out of the question with forged internals... whoever was against that is an idiot:🤷♂️
its a built motor not stock.
@@anthonysolomon4233 we know, but alot of people like to think that the 4.6 block isn't good enough to have high hp; they like to grab a 5.0 or a LS
The 2v stock block can hold 1000+ hp
@@_slow_4.6l_ the stock block cannot take 1000hp lmao 4-450 at most
Like I said before brother "It's such a joy to see your 2V running so well". Keep up the hard work!!! That waste gate may need some attention, race car problems they never stop. Love your car brother. By the way I used to be station at Fort Campbell from 1995-2001. I sure do miss the fishing there.
The88Beast thank you. You’re right there are always little issue that pop up. I love Campbell been here since 09
I delivered beer to Ft. Campbell when I lived in Hoptown back from 99-01. Haha! Small world!
What kind of camera does he use
Prince Zay cannon g21 camcorder
Hell yea man! Great numbers!!! Definitely one of my top 2v’s
Bottle Fed2V thanks man. Big change coming this winter I want to touch over 1000whp
That 2V is makin some power 💪😤brutha,nice job!!
Donald Erdbrink thanks brother
Amazing job and build buddy keep up the good work and I look forward to seeing your next video
thats awesome.. and no trailer required!
754HP and 595 TQ. Impressive.
SkepticalVex last pull made 846
@@andrewlavender08 Killing it! Congratulations!
@@andrewlavender08 stock engine?
SkepticalVex thats a kick ass 2valve they dont get enough credit they can make 400 na if you build them right
whaattt? unless you build the motor you arent getting 400 NA lol
Damn, you must have that thing built to the hilt. Those are HUGE numbers for a 2 valve. Badass job.... FORD POWER baby!
Holly hell Andrew those are really good numbers! Thats awesome man!
“Playing around in Mexico on the way home.” Hahaha
Great video...man that Corvette is nuts!!
Another awesome video as usual! Love what you've done with that car, I would like to do that to my Stang! LOL
Badass video! You and Sergio’s cars seem like a good match
J.Money they are very close when we actually start at the same time lol. I also had about 300 extra pounds in the car lol probably only reason I was getting traction
Great video and power Andrew, I love it!
I thought at the beginning you might have to melt down the big guy and pour him into the passenger seat... ;)
Robert G 😂
"Boost weather" Love it. Now in Australia if we drove that car on the roads we'd be jailed for life. You guys are so lucky.
cause you gave your guns up
@@eternalcowboy585 care to explain how exactly us keeping our guns allowed us to drive these vehicles on the roads? Last I checked, there is still a shit ton of emissions and a yearly inspection we have to deal with. Government doesn't give a damn about your guns, they have fucking tanks & drones that will dust your ass from 2 miles away.
@@TheAmericanUhate yeah greatest country in the world🤙
@@Michael-gh1tj that doesn't answer my question, at all. What exactly are we the greatest at?
@@TheAmericanUhate you can be whatever you want in life in the US. Like make strip cars and gas is hella cheap😂
That's quite a detour to run down to Mexico on the way back. 🤣
MrWhitetailtracker 😂
damn bud, love your channel. have a similar mustang just pushrod stuff. sold my vortech and went on3 to see if i can get my 331 stock lock sn95 into the 9s. went mid 10s a few times with good mph but still rowing gears so my swap to a glide this winter. keep up the videos.
That stingray was gonna jump off the chassis.
Omg! Bro I got chill bumps! She's singing GREAT
Man those Ford mod motors sound good. I was enjoying all the Chevy's on the Dyno before, but the Ford coming on after was much more musical by comparison.
Craig Lamb I agree 7500 rpm from a 281 v8 sounds amazing
Who ever makes those blower cams I need one wow!!! Love the sound they all almost sound identical
Sergios Z car is super nice! Seen him many times at clarksville speedway!
I bet your neighbors love you lol👊🤘2valves ftw💯
Jason Moss bahaha one of em does
Good old Clarksville Tennessee?? I lived there from 2013-2016 . I was not liked by the MP’s for racing in front of gate4 in my 2009 N/A -ZR1 “” Nitrous assisted”” 😂
Man I have a 99 150 I have had since I was 18 she is my first truck and vehicle she has the 4.6 but I was thinking of swapping lightning motor but I didn't know a 2v can make that power I just want 500 hp a nice cruiser ur my favorite channel I'm learning alot thanks for the great videos
FORD4LIFE73 me too got a 98 4.6 and want 400-500 would be sweet
A lightning is also a 2v it's just a 5.4 2v it has the same shit rods the stock 4.6 does. All you gotta do is throw In some forged rods and pistons which is like 1200-1300 for the parts alone...once those are in you can make 600-700 easily maybe more...that's with stock block and stock crank etc. I'm talking wheel hp too. The stock rods aren't that great and limit them to maybe 450ish it's not set it stone some have gone higher but forged rods and pistons is all that is needed to add several hundred hp to that "safe" number.
@@michaelharris748 thanks so its better to rebuild my 4.6 2v and put a blower on it then to do a lightning motor and trans swap
You’ve got the cleanest engine bay I’ve ever seen in a newedge. How’d you do it? And which engine controller you using ? That screen looks pretty badass
“I’m bad at math”😂😂that part sent me
I know this is an older video, but very impressive buddy! I hope you got that wastegate problem figured out
Kristjen Štjuprić completely new build now. Never really got it to not boost creep
I like how the 2 v sounds
Awesome numbers man!!, I bet with that 3#'s you were missing you would have been real close to 900. Can't wait to see what the difference will be with some trick flow heads. Keep up the good work!
Hey are you on Instagram? I've got a built and boosted 2v with vortech v3 trickflow heads and trickflow cams on low boost 600rwhp
@@brucehendrix he might be in the bed bro
It looked like 846hp and 705tq. Had to rewind a couple times
My s475 combo needs 2 wastegates.i run 2 45mm gates.tho ive been told u could get by with 1 60mm if placed right
Very impressive.
some impressive numbers
Yo !! Love the build, informational a plus . My question to ,what ATI damper you went with on your application? Well I cannot figure out for the life of me, so if you don't mind I have a 4.62v 400rwhp
Nice video!
That turbo sounds so good
Wow, I'm impressed. Need to get mine on the dyno, but I'm only making 350 if I'm lucky.
Wow that is sweet!
I love it!!!!
much love for the 2V.
Awesome job on 4.6 2 valve. Question do you use a aftermarket damper or underdrive pulley? If so do yo recommend ATI,Trick FLOW or do you recommend a piggyback style?
Nice numbers! I have to figure out my next build. Everyone is making big power. I had my car dynoed last week. 320 hp & 332 tq with a factory ford 302, 11R 190 heads, Ed Curtis cam, Holley SM2, stock AOD and converter.
Afri thanks man. Sounds like you have a good foundation. Toss a turbo on keep it around 500hp and have fun.
Thanks.
My car is an AOD car. A T5 car would have probably put down 350 hp. My baseline numbers were 168 hp and 254 tq. It's still a high mile, 30 year old Ford 302. Search Turdzilla's dyno numbers or Derek Baran's ReDo Blue dyno videos on CZcams. I think I'm doing well with a naturally aspirated 30 year old 5.0.
I have a video of my car idling here on CZcams if you go to my channel. (It sounds great. I get compliments from guys everywhere I go). I had to save up to get my 11R heads. None of this stuff is cheap. It only gets more expensive from here.
Afri dude thats not bad
I think I've seen that Datsun run 5s in the 660 in Clarksville TN? If y'all are close I'd love to see your 2V run there
Kaycee Jones yep that’s my buddy. We both run at Clarksville
Woa Brutal
Low boost, medium boost and high boost numbers it looks like. That kill tune is strong 🤞
Awesome
On the fab table is a USMC combat engineer castle.
Subscribed , just because the 2v
I have a 99 gt- what you have done are goals
I have
a throttle body
Off-road h pipe with custom mufflers
Intake
Long tube headers
Cams (don’t know size but biggest I could put in)
3.73 gear
Tuned
On pump gas puts about 300 to wheels
Dope car
great work ¡¡
Nice power !!
What transmission & torque converter?
What turbo do you have ??
Makes me want to 4.6 my fairmont now.
Wow I just found this I didn't know you could do that with a 2v I been wondering how to go about making it turbo without blowing it to pieces idk if I could pull off a build like this
I was gonna say check the diaphragm. Looks like a good day !
Nice work. Is the blow by much of a problem if it's on decel?
Justin Johnson not really but mine is pretty bad until I go wide open
gives me hope for my newly-acquired 95 t-bird lol
Ive noticed sum of the comments and post wher people are thinking that's a stock gt 2 valve ! But in the videos of building it , it's clearly stated to be all alluminum block and if u look at the waffle castings in the intake valley ,u will see that it's a teksid block from either the mark 8 lincoln or 1996- 1998 mustang cobra ! A stock gt from 1996 to 2004 would blow its wad after it reached 500 hp ! Maybe not rite away but soon enuff ! Exspecaily without forged internals! And a extremely balanced rotating assembly! His motor would make even more power if it had 4 valve heads but I'm very impressed with the 2 valve and him keeping 2 valves on the map! His block can handle 1000 hp or more !
The 2v block is plenty strong it just needs forged internals to make big power.
Nice 2v
\m/ beast mode....engage \m/
😂😂😂😂wonder what the neighbors are thinking right about now lmfao
Like that Mustang but that Datsun z stole the show bro🤔
Not bad for a 2v Run bigger intake piping. Get a lil more volume in there. Boost will drop a couple Lbs too. Waste gates are probably a lil too small for the turbo. But bad ass car.
That's funny watching my big ass climb into your car 😂😂
Fill in anything extra that needs to be done for the install like does the damper require timing thanks
Damn that thing is nasty. That oil smoke on the let off though 😖
Don't have a dino around where I live but running 6.0 with a 96 push rod motor at 115mph wondering what the HP is.
Hey Andrew, long time fan and supporter. I’ve decided to ditch the D1 and go with an on3 on my Bullitt 2v. I’m curious though, do you know if a borg Warner would fit? If so do you recommend a specific size? Looking for max 500hp on a built short block, daily driver.
Big O a smaller borgwarner like the s369 would fit perfect and easily make 500hp
Where can I get a cast intake manifold for my 2valve man please let me know
Dang 846hp 🥰🥰🥰
Wow!!!!
I’m subscribed to your build would like to get in touch with you about building my 2v similar to yours !!! Awesome build you have buddy
the orange car @14:30 is a 2002'ish infinity G35 (nissan skyline)
Great video. So what's in that yellow Corvette? Big block? Also, what's the significance of speeding around in Mexico? No highway patrol? No speed limits?
You can't get in trouble with local pd if your in Mexico
So what was the last pull ? 754 hp and 595 torque ??
What kinda turbo n what else is done?
Damn what set up
You running ?
Are you still in the clarksville area?
Your neighbors must hate you 😂🤣
Justin Wagner a little bit haha
bought a truck.... the stang is put up time for my mmr motor also what did you do with your old turbo?
GreasersInkNY awesome. I sold the old turbo to a buddy
That Stingray sounded like a machine.
edit: 1500 hp and -2 mpg lol.
Great numbers . What fuel and how much boost was that on ?
Horsepower Junkies of Texas e85 27psi
Andrew Lavender nice man love the car
Ive got a 4.6 2v what would help me the most???
Who is owner of G35, and what intake manifold is that?
What is the orange car and what engine is in it?
What kind of dash is that sir?
You have A turbo 400 so just change your ultrabell and go with a set up like yellow vette
hey man i have family in paris and was wondering if titan motorsports would be a good place to get my 3v cammed mustang tuned are do they do alot of mustangs
They don’t have capability to tune SCT. Look into DBR or Boost addicts out of Nashville
Supporting the locals would be cool ask would they like to sponsor you
What's that white 1993 Chevy 1500 running under the hood? And that yellow stingray that put down 1700rwhp? Wtf engines are even in these guys?
That yellow vette need to go race the dam hunicorn 🤣🤣🤣🤣🤣🤣🤣
Support Vehicle is mandatory for Nissan
I have a 2000 2v fully built motor/trans with a single 80 and made 840 to the wheels on 18 psi I’m swapping the turbo and plan to shoot for around 22 lbs looking to clear around 950rw on a street 2 valve.
How much did it cost to build that motor?
@matthew pate, stop lyin, bro. No way your making that with what you have. Ballooned dyno then for sure. Sorry, I know.
My brother has a f150 with a 4.6 headers roush intake throttle spacer intake roush cat back exhaust and an edge programmer and runs like shit what can we do to improve performance
@Anthony Mayzwe did we took off the edge programmer and we did a Dyno tune got a ton of high-end torque but no low-end torque that's where we're getting killed at we're planning on doing an xpipe see what happens
I doubt you will see this but maybe someone can help I’m looking for a dyno shop in middle tn any suggestions
What car was at the 15 min mark
What size cowl hood?
what is your setup?
Thanks
Any forged internal work? Stock 2v with some boost slapped on made that much power? Jesus!
lol... no that motor is built...ported heads...forged internals