How to Install the Delta® Adhesive Corner Shower Wall Set
Vložit
- čas přidán 5. 06. 2024
- Follow along as Hannah walks through how to install the Delta® Adhesive Corner Shower Wall Set (B69912-3838-WH), note that this video will also work for the Delta® Square Corner Shower Wall Set. See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Adhesive
- Gloves
-1/16"x1/16" x 3/32" U-Notched Trowel
- Drill
- Safety Glasses
- Caulk Gun
- Level
- Carpenters Square
- Cardboard
- Caulk
- Hole Saw
- Utility Knife
- Masking Tape
- Tape Measure
- Pencil
Steps:
0:00 - Intro
2:00 - Take Measurements
3:53 - Dry Fit Panels
6:59 - Adhere Wall Panels to Drywall
9:52 - Apply Sealant
Check out these related videos:
How to Prepare to Install a Delta® Corner Shower - • How to Prepare to Inst...
How to Install the Delta® Neo Angle Corner Shower Base - • How to Install the Del...
How to Install the Delta® Neo Angle Corner Shower Enclosure - • How to Install the Del... - Jak na to + styl
Great video. Thank you
I am in need of a corner panel - to fix the gaps in-between the two wall panels. Where can I find it, please?
What adhesive was used for the floor pan?
Can these shower panels be installed over green dry wall or does it need to be over something like water resistant cement board which has been waterproofed? Will these panels adhere to GoBoard?
Green drywall is fine. Water proof to your desires.
And just like the printed instructions with their product, no mention of the type of adhesive to use.
What adhesive you use for the wall?
Looks like she is using Loctite brand Power Grab Tub Surround adhesive but any construction adhesive would do.
Appreciate it
Whatever brand adhesive you use make sure it's specifically for the type of surround you are installing, some adhesives will in fact bleed through. . .
I used power grab tub /shower
Omg that looks so flimsy and cheap. Delta should be ashamed.