How to Install American Standard AXIS™ 38" Neo-Angle Shower Door
Vložit
- čas přidán 27. 03. 2016
- Hands-on installation of the Axis 38" neo angle shower door, as a companion to the installation instructions. This door has a white finish frame and pivot opening door and clear glass and fits 38" Neo-angle Axis shower base and 3838CW Axis direct-to-stud wall set or tiled wall.
www.americanstandard-us.com/tu...
Subscribe to our Channel:
www.bit.ly/AmericanStandardSub...
American Standard on Facebook: / americanstandardplumbing
American Standard on Twitter:
/ amstandard
American Standard on Instagram: / american_standard
American Standard on Pinterest: / amstandard
Find More Great Videos from American Standard: / americanstandard01
Check out our Luxury Bathroom Products at DXV by American Standard:
/ dxvluxury - Jak na to + styl
Bonjour , est-il possible de seulement changer les portes/vitres et garder une base existante? Si oui quelle est la technique? Merci
I want to replace my neo angle shower on new one same size, but didn’t find same size my angle bottom is 24x31x24. Does such a size shower still exist?
heya american standard. i'm using the base and the glass kit, but not the plastic walls, i have tiled walls. the only info provided is "use anchors" but zero info on how to measure to place the glass. any help here? i can't measure one inch from the plastic walls because i'm not using them
Hi Derrick! So there are two different doors. The installation instructions do have the info on how to measure to place the glass, which we've included below:
AM3838N1400.020 - In the install instructions Step 1: You take a level and place it on the floor of the outside edge of the shower base to mark a vertical line on the wall. Follow with a level vertical line up the wall. From that drawn line you move in the 1” and that is where your wall post will be located.
AM3838N2400C.213 - In the install instructions Step 1: You take the level and place it on the floor of the outside edge of the shower base to make a vertical line on the wall. Follow with a level vertical line up the wall. From that drawn line you will move in 7/8” and that is where your wall posts will be located.
For further clarification or for any additional questions, please give us a call at 800-442-1902 and we'll be happy to chat. Thanks!
@@americanstandard I installed the 38 frame kit with no issues. Hung the doors and when closing them there is a 1/2 gap on the top between the magnets. Both doors roll freely on the track top and bottom. The frame is screwed together tight and square
@@matthewethier1977 Hello Matthew - We are glad to hear about your smooth installation! If you ever do need assistance, you can always give us a call at 800-442-1902 and a member of our Consumer Connection team will be happy to help. Thanks!
Can this door open in word ? I had someone put it up for me and I think they put it on wrong . Instead of opening outside it’s opening inside
Sounds like they did it wrong.
These instructions are useless. Are the measurements to center or either edge. Luke, what we have here is a failure to communicate! It is sad that you waste so much time and money, not to mention the carbon effects.