How to Install the Delta® Neo Angle Corner Shower Enclosure
Vložit
- čas přidán 7. 07. 2024
- Follow along as Hannah walks through how to install the Delta® Neo Angle Corner Enclosure (B99912-3838-PC). See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Phillips screwdriver
- Gloves
- 1/16" x 1/16" x 3/32" U-Notched Trowel
- Drill
- Safety Glasses
- Caulk Gun
- Level
- Carpenters Square
- Cardboard
- Caulk
- Hole Saw
- Utility Knife
- 3/16" and 7/64" Drill Bits
- Masking Tape
- Phillips Screw Bit
- Tape Measure
- Pencil
Steps:
0:00 - Intro
2:40 - Install Template
3:38 - Install Wall Jambs
6:10 - Install Glass Panels
7:00 - Install Support Bars
9:15 - Install Brackets
9:43 - Secure Glass Panels to Wall Jamb
10:33 - Apply Sealant
10:56 - Install Hinge Bushings
11:40 - Install Glass Door Panel
13:31 - Install Handle & Gaskets
Check out these related videos:
How to Prepare to Install a Delta® Corner Shower - • How to Prepare to Inst...
How to Install the Delta® Neo Angle Corner Shower Base - • How to Install the Del...
How to Install the Delta® Adhesive Corner Shower Wall Set - • How to Install the Del... - Jak na to + styl
Thank you! Very helpful videos. Well done!
Thank you
Awesome helpful video. I just did one it helped a lot. Very nice door.
We're very happy to hear that! Cheers to you and your new door 👏
@@deltafaucet hello is there a video to install the shower itself? Thanks.
Thanks for a great step by step video👍👍👍
It would sure help if you showed a closeup of the template marks. I had to search elsewhere for a closer view.
where did you search?
Can someone explain what I am doing wrong, I installed the door gaskets I assume correctly. But they don't seem to be magnetic although I assume they are because they're no different than the ones in this video, the only way I can keep my door closed is by installing the door gasket in a way that it wedges into the overhead metal bar
I have installed two of these They both leak the doors do not shut al the way Any solutions in the Home Depot comments I see that others owners had leak problems also
I just bought this item but the wall jambs are missing where can I get replacements
Not sure if this is helpful at this point, but mine were lodged in the side of the glass wall panels.
Did not get a template, is there another way to set this up ?
Hey did you ended up installing this shower doors? how is it going ? I planing on buying them but I see a lot of bad reviews
One thing they don’t tell you is you need to let the caulk/sealer dry first. Otherwise, the frame slides around when you try to adjust the door.
Also, don’t use any of the “sealants” Delta recommends. They don’t work.
Use bathroom grade silicone caulk.
I used sealant they recommended, after a week it bubbled up.
Had to take the surround apart and start over.
Yes, I let the original caulk dry over night. It was still wet a week later.
Silicone worked fine after 24 hours of dry time.
So glad to find this. Thx for not making me read instructions! 🫢
Hey did you ended up installing this shower doors? how is it going ? planing on buying them but I see a lot of bad reviews
@@jugodenaranja2010 Wow. This was a year ago! I was 69 yr old, female, not very strong and I did it mostly by myself. Old house, wall wasn’t plumb. But, aside from needing my husband once for a two man job (probably placing the door), it turned out fine. Not our house, so I don’t know how it is to use. Go for it! 💛