China Tools Ep.37. I Wish I had seen this video before buying a Pocket Hole Jig!
Vložit
- čas přidán 14. 05. 2024
- In-Depth reviews of woodworking products from China. In this episode: The Enjoywood Pocket Hole Jig and some basic information about Pocket Holes in general!
If you want to see a ranking among all the products I tested over the last three years, visit my site: hookedonwood.online/China-Too... Here, you can find my shop improvement series with free plans as well! hookedonwood.online/Shop-Impr... Here are all the direct links to the products in this video.
Enjoywood Pocket Hole Jig
www.banggood.com/custlink/m3G...
Yomo Pocket Hole Jig
www.banggood.com/custlink/mvD...
XK2 Pocket Hole Jig
www.banggood.com/custlink/GKv...
Spiral bit (compression bit)
www.banggood.com/custlink/KvG...
-----------------------------------------------------------------------------------------------------------
My Personal Banggood favorites all time!
1. Hongdui Edge Trimmer
www.banggood.com/custlink/GGK...
2. Doweling Jig / Multi-row puncher
www.banggood.com/custlink/KDv...
3. Kerfmaker
www.banggood.com/custlink/vDD...
4. Drill guide cabinet jig
www.banggood.com/custlink/KDD...
5. T-ruler
www.banggood.com/custlink/3GG...
6. Precision square
www.banggood.com/custlink/DKv...
7. Miter square
www.banggood.com/custlink/GmG...
8. Miter square brass
www.banggood.com/custlink/vmG...
9. Height gauge
www.banggood.com/custlink/KGG...
-------------------------------------------------------------------------------------
My name is Dennis and I am from Hooked on Wood.
Subscribe to my channel!
czcams.com/channels/uvj.html...
My CZcams channel is a hobby. This means I try to upload 1 a 2 video's a month. But this is not at a specific schedule. So If you do not want to miss my videos. Subscribe and click the notification.
Products I use in my workshop
Table saw with dust system:
Harvey HW110GL Europe edition with sliding table
Harvey / Axminster trade S-12 overhead blade guard
Dust extraction: HBM 200
Oneida Super dust deputy 6”
Workbench:
Incra master-R-router lift
AEG 1400w router
Incra 25" SL positioner with Wonder Fence
Drill press: Jet JDP 15B
Miter saw: Festool Kapex 60
Different links to products I use
Clamps:
Axminster trade hold down clamps
Piher Rail guide clamps
Micro Jig dovetail clamps
Bessey parallel clamps
Axminster trade parallel clamps
Push blocks
Micro Jig Gripper
Incra Push block
Thank you for viewing.
Best regards,
Dennis - Jak na to + styl
HelloDenis, what a wonderful find, thank you for sharing. I look forward to the next video and catching up on previous episodes :) Greetings from Ireland:)
Based on your review of the Enjoywood Pocket-Hole jig I purchased it even though I already own a Kreg kit. It arrived today and it is impressive. Really appreciate your reviews.
You literally make me want to take up technical drawing again. I don't even know why I stopped. It's so enjoyable scaling your drawings than doing it on the computer. Well for me it is.
You inspire me. ❤
The laser template for routing is a great idea. Thanks for sharing.
Hi Dennis,
thank you for this in-depth review. I startet with a wolfcraft pocket-hole-jig, which was my entry to this topic. I'm a big fan of pocket hole connections, but the small wolfcraft jig came to a limit when I was building angled and complicated structures. I just ordered the XK-4 and when I watched your video I'm 100% sure, that this little jig is going to be exactly what I need.
Keep up the good work!
Hey Dennis! Great you came up with this right now. Will be starting a project soon where I need pocket holes and just bought it right away. Very convincing! Too bad, that you do not remember, which drill bits you normally use. Lets see how the one performs, that comes with the jig.
Thanks and keep up your excellent work!
Best Regards
Andreas
Dennis, I like all your videos. You are the best.
Dennis "Dr. Banggood", i love your reviews and precise woodworking projects. Turned out very nice with this platform.
I recently started woodworking as a hobby and discovered the endless amount YT channels. After watching my first episode of hooked on wood i subscribed instantly it has now become my favourite channel. Its easy to forget how much work goes into producing such high quality content.
Thanks
I really like your tests of China-Tools and sometimes I find these tools from other brands (no brands/imitations) with really low quality. Just came across your test of this jig and looked for it on Lazada, as I am in Thailand. Here it costs just about 1600 THB which is about 42 to 43 USD right now what makes it even more interesting for me. From all shown pictures it looks absolutely original and of good quality. And it also includes 2 of the drill bits. Lets wait and see if it is the same and the quality is as good as in your test.
A great video Dennis, as usual, following which I asked for this pocket hole jig as a Christmas present.
I unboxed it yesterday, and found parts in the package whose purpose isn't shown anywhere in the instructions, nor in your video. There are two right angled brackets made from the same black anodised aluminium as the pocket hole jig. Each is 12mm thick, and on the outside measurement the sides are 34mm and 37.5mm, and the width 28mm. There is a hole through each bracket, perfectly machined to accept rods (below) with a screw to secure the rod in place. On one side is a stainless steel plate secured by 2 screws, one as a pivot, the other through a circular slot, enabling the plate to be swivelled and set at an angle to the bracket.
The rods are 6 beautifully machined stainless steel rods, each 6mm diameter and 200mm overall length, with an M3.5 x 8mm male thread on the end, and a corresponding female thread on the other end. They are most likely intended to be screwed together into one long rod.
I have no idea what the purpose of any of these components is, and suspect they were included in the package by mistake, but if anybody reading this has any idea what they may be, please let me know.
I have, of course, photos of them, but I can’t include photos here, unless anybody knows how I can do that?
Thank you!
Excellent review - your attention to detail and thoroughness are appreciated. Keep up the great work.
I agree. Thanks Dennis.
Superb review. Bought one immediately
love your work. keep it up.
Thanks Dennis for another thrilling adventure in your wood shop. Your videos continue to be second to none. 💪😎👍🇺🇸
Dennis, another great review. As usual, I love the jigs you make with the black MDF but I am afraid I must ask you stop using the black MDF. Many of us can not find that product where we live and it is not fair to see such beautiful and functional jigs we can't have. I am kidding of course - keep up the great work in your shop and videos.
you may consider applying 2 coats of black gel stain to regular MDF to achieve the same look.
@@mloverine I may give that a try. But not as immune to scratches as solid.
There are several suppliers on the internet that sell colored MDF. I won't post the links on here because it may be against Dennis' agreements with his venders.
He has a worldwide audience. Not everyone has access to everything. Make do with what you can get, and don’t expect the world to cater to you.
@@jasonandersen5975 Chill out Jason. I am well aware of his audience. I was kidding as Dennis well knows.
Very convincing review. I have just purchased Enjoywood Pocket-Hole jig and patiently awaiting the delivery. Cheers!
Enjoy it
@@HookedonWood Thank you! I will. The item has arrived yesterday straight from China (8 days) - which is not bad.
Thank You for a well thought-out review of this tool. Your evaluations are always in-depth and clear and logic. (And I wish we could get the black MDF here in South Africa!)
you may consider applying 2 coats of black gel stain to regular MDF to achieve the same look.
@@mloverine but you'll see the base color as soon as it gets a small scratch.
Ditto on the included square driver. Those boxes of kreg screws are available EVERYWHERE. Kreg even makes all the lengths of pocket hole screws.
I was waiting for the fly to get zapped lol. Great video Dennis.
😂 He was lucky. I did not notice it till watching the clip😂
amazing video... very clear in the concepts!!!! greetings from Chile.... and Thanks
I always enjoy your china tools review Dennis you cover every detail about the tool. And this pocket hole jig looks great I own a Armour pocket hole jig it’s not as pricey as the kreg and it’s built well with great dust collection. Thanks for all the work and effort you put in to make this a great channel
I have the Armor pocket hole jig as well and I love the auto-adjustment for the drill bit.
I bought this because the cheap plastic one isn't fun to use. This was! I couldn't even get the stop on the drill bit at all. Luckily I had another.
I can't compare to Kreg because I've never had one. Thanks for pointing me towards it. I'll copy your platform one weekend.
Awesome Video.
Thanks for adding the information about the screws👍😍.
Think I make an easier platform for my pocket hole jig. I don't have the equipment.
Great review mate 👍👍👍👍👍 thanks
I think this was a good review. Lots of good information.
Awesome video again
Brilliant work on the base, Dennis! 😃
Thanks a lot for the review!!!
Stay safe there with your family! 🖖😊
Awesome review. 5 star 👍🏽
I really like the effort and dedication you put in making your jigs absolutely perfect.
I woudln't even dare to use them to work fearing to damage them actually ;)
Thanks for this great review (another one 😀 ). I just bought one now at 69€ for those interested (to be shipped from Spain).
Thanks for the review. Have just ordered.
Do you have a video/plans of you acoustic panel s you made? I'd like to try and make some.
I only use pocket holes for light work and then if its downward pressure as dowels are stronger, and even stronger than dominos which I find very over rated, but never the less another good and useful video so thank you Dennis well done
I watch all of your videos and always seem to learn something from them. Keep up the great work.
Great video Dennis your shop is looking amazing I’m really happy for you cheers brother 🇨🇦
The Jig I would recommend most is the Armor Tool jig, which has an auto adjust for the bit and works really well. Armor tool also has color coded screws which makes organization easier.
I didn't like the Kreg 720 - I felt like it had parts that didn't fit together well, like the wings. I think you basically have to build a platform for it and that shouldn't be necessary. If I had more patience I might have got it working, but because it was on back order for a very long time originally. By the time it arrived I already had the Armor Tool and also the Massca jig (another solid jig) and I didn't feel it was worth it and I donated it.
That was going to be my choice because I loved the features. However, there are far too many issues being reported, in many woodworking forums, that I changed my mind. Just bought the one above.
@@johnmcbean5392 Same here! I was going to buy one and then read about all the issues as well. too bad. they could own the market.
Great idea 💡
Hey Dennis my friend.. I saw ur video on the site Banggood and I bought this brilliant and very beautifully made Pocket Hole Jig. It's a fantastic bit of kit. Now I still need to make a holding piece for it but I will get down to that soon. I have 12 days off for Xmas so those 12 days will give me time to build my workbench finally and I will make a nice piece from MDF for this. Unfortunately I cannot get Black MDF here atm so ordinary MDF will have to do.
Thanks for the inspiration bro.
Now onto some other tools u gave me a heads up on. Those lovely Hold down clamps with the 19/20mm dog hole shafts are a wonderful clamp mate. They are so well made too but I also went for these very small grey squares as well pal.. They are so precise as well which for the price I couldn't believe it.
I watch ur China Tools video all the time bcos u give great advice so I wanted to drop a line wisjing u a very Merry Xmas and also I wish u every success in 2023. Love the new workshop u built a while back too btw.
Oh one kore thing. The Atomstack Laser engraver u reviewed was the one I defo tried to get but they wouldn't ship it from America and China is out of stock now for months. That's a real shame bcos everybody is buying them up like wildfire atm. I tried to get a different brand with similar characteristics but they have made me wait for over a month now with still no sign of it beig shipped. It's a shame bcos I wanted it to do something for family this Xmas. However I think I will go back again and buy the Atomstack u reviewed for my Niece and her mum next year bcos it's a brilliant piece of kit for the price.
I'm about to venture into the world of building my own CNC Router machine this next few weeks and I'm hoping it helps me take my woodworking to new heights mate. I'm no expert with the software but hearing u say it is possible to become proficient at it I am sold my bro.. TAKE CARE AND HAVE A GREAT XMASS DENNIS AND THE SAME TO ALL IN THIS COMMENT SECTION..
One more thing mate.. My apologies for the long winded comment.. LOL
No apologies. Love your comments. Merry Christmas
I would definitely say that using pocket hole screws is a better way to build cabinets and some other types of furniture.
Hi Dennis love your channel I bought this pocket hole after your review. Great bit of kit. Have just got my 20w laser and was wondering how you got to cut out for this tool. Or if you have the file to share. Many thank. Am new to the laser machine
I bought the Enjoywood pocket hole jig a few days ago, I already own kreg mini for many years. The Enjoywood is very well constructed, but the drill bit is a total junk. It didn't manage to drill a single hole. You will have to buy the Kreg drill bit if you really want to enjoy this Jig. The toggle clamp is very basic and it is very difficult to find the correct setting for the wood thickness. If you want to improve this Jig you will need to buy a Bessey self adjusting toggle clamp + Kreg drill bit, this will set total price very close to the Kreg 720 which is far superior.
Another great review Dennis, although every time you do one of these my wallet cries out! Could you show us how you did the incredibly large chamfers on the black mdf? I've seen them in other builds of yours and they look great but we never get to see how you do them.
Hi Dennis another excellent video, wished I had seen this before buying my kreg. Would pocket hole screws be Ok for Melamine faced particle board?
Dennis; since I started looking at Banggood tools, some years ago, I think that their prices have, overall, incteased to the point that they don't have attractive prices, unless you happen to come across something on special ... I guess that success is killing their price advantage.
Great video but I think I will stick with my Kreg 720 I love it best pocket hole jig ever.
Agree :-)
Hi Dennis! I've been enjoying your China Tools series very much.
What is the black material you used to make the base for the pocket hole tool?
Thank you so much for your thorough and thoughtful analysis of so many tools!!
Valchromat
Super review weer Dennis! Heb je toevallig ook een tekening van de buiten keuken? 😎
Always love watching your reviews. But Denis, I missed episode 36 of China Tools. Did we skip an episode?
BTW Dennis, love the channel
Hello from Australia! Clicked on this immediately- your reviews are excellent!
Great review, their prices are bonkers though. If you’re in the UK, currently they’re £110 if bought from China, and £62 if bought from USA (but that would incur a bunch of import and handling fees).
Just bought one right now...from the UK warehouse...for £67.99 and not £110
Where do you get that black MDF (?) from? Love it
3:48 this kind of bit it's called Robertson 😉
UPDATE: Today the ordered part arrived and I unpacked it immediately. It corresponds fully to the one shown here. The feel is excellent and it makes an perfect impression. I have made the first test holes and can only fully agree with the post and the absolutely positive assessment of this tool. The price here in Thailand (incl. shipping from China) was 40.80 USD
Hi Klaus, where in Thailand are you? I'm in Buriram
@@ronsmith2464 Hi Ron, sorry, I was offline for two weeks. I am at Hua Hin
Can you share the materials list for the sound panels you built?
That looks very much like a variation of Trend's Pro pocket hole jig. The clamping lever is like a car handbrake. Be warned though, that if you hold it like a handbrake, as the clamp snaps shut it can crush your fingers between the handle and the bushing mount beneath it. I drilled out the rivets and made a longer handle from steel flat bar which prevents this. It's a couple of drilled holes and some filing - the rubber grip pulls off and slides onto the new handle. Worth the time to avoid an inconvenient injury.
0:35 I don't think thin drill bushings are a problem if the material is any good. Thin or thick, if it's decently hardened steel it isn't going to wear out. Other than that quibble, your reviews and ratings are reasonable.
What a great review on this pocket hole jig. Reasonable price at $69.00. Very nice platform. stay safe, happy and healthy, thank you for sharing this with us today, from Henrico County Virginia
Great review Dennis once again.
Is the Kreg 720 still a better jig? Or would you have this one
No, Kreg is still better
@@HookedonWood 🙏🏻 thank you Dennis
What is the make and model of the laser you used?
Can you or have tested routers from Bangggood??
Saludos cordiales y un abrazo muy fuerte para usted y toda su familia maestro de Aguascalientes México Francisco Gamez 👍👍👍👍👍👍👍👍👍👍🍀 y bendiciones
Unfortunately Banggood has become very difficult to buy from. I have about 20 items in my wishlist that are 'under restocking', and the estimated availability kepps going back further and further. Some items I have waited for 3 months and they are still not available. Other items I have given up waiting and purchased elsewhere. It is such a shame, and I suspect related to the endless lockdowns and also the global supply chain problems, but Banggood is no longer my go to place for tools and jigs.
Hi Denis, another great video. Would be nice to see a direct comparison with the Trend version which looks very similar. Keep those videos coming.
Hallo, welke resultaten heb je gevonden met de rubio-olie en laser, ben je verder gekomen?
LG Kuno🙂
Would you be willing to share the file you used to cut the router template for the base?
This base has two layers, one of which is black, what kind of material is it and where could buy this？ aslo I see some words printed on it, how to archive this?
Hoi Dennis! Genoten van de video, ik hield echt van de manier waarop je de zwarte MDF-basis hebt gemaakt. Zoals gewoonlijk uitstekend werk! Ik heb echter een vraag: is het beter om de boordiepte in te stellen zoals bij een afstandsstuk aan de onderkant? Dat vind ik leuk. Is er een vuistregel? Bedankt, David
Ik ken been vuistregel. Gebruik ook verschillende methodes zonder reden eigenlijk. Maar ik geloof dat dit wel de meesr nauwkeurige is.
Another great review Dennis, I have an XK3 which is only a portable unit and has no base for clamping boards to, which can be awkward for repetitive jobs such as making Drawers. Can't decide whether to buy this one or spend the extra money and go for the Kreg 720 Pro but parts of that seem a little flimsy. If cost didn't matter, which one would you go for ??
I would buy the 720, not the
Pro version. That is a very nice machine. At the other side, working with both of them
Is perhaps different but not in a way one is much more convenient. So, if money is important you will be very happy with this one. The best user experience will be delivered by the Kreg 720
@@HookedonWood Dennis many thanks for taking the time to reply and your insights into both Pocket Hole Jigs.
I will watch both reviews again and make my mind up, I do like the look of the Kreg 720 and I do already have my XK3 for awkward pocket hole situations. Just a shame the 720 has so much "plastic"...
Decisions, Decisions 😁
Hi Dennis, well Banggood has made up my mind for me 😁 the price of the Enjoywood jig jumped overnight from £68 to £93 in the EU and with the standard Kreg 720 available in the UK for just £112 it's an obvious choice for me.
Just need to work out the best way to make the rather awkward platform.
Thanks again for your excellent reviews.
your work precision is unmatched and intimidating too
Nice one, Dennis! Also curious about the laser cutters/engravers as I'm planning to buy a 20W in the near future!
I plan to upload the making of my drill bit platform first, and than the laser video will be there!
Hi Dennis. Have you tried laser cutting black MDF ? Would be very interested if that works. I am wanting to use some 10mm MDF but don't have a laser cutter.
With a strong laser is will work. My former Co2 laser or 20w diode laser where not capable of doing this. But my current 100w Co2 laser cuts 10mm black MDF.
@@HookedonWood Great thanks. Confirms what limited info I could find online about standard MDF.
P.S do you just use the Part A Rubio oil with the black MDF ? Seems to be a 2 component mix on their website ?
Tips om een pocket hole te maken in een 68x68mm balk? Alle pocket hole malen die ik kan vinden gaan maar tot 38mm 🙄
Kreg 720 all the way 👍
Hi Dennis, how do you set different material thickness, which are not marked? There are material thickness marked e.g. 38mm and 44mm, but the measured distance between them is 10mm. The mathematical distance is 6mm. How do i set for 40mm thickness?
Hi, You are right. Kreg also does some shortcuts with their height or depth adjustments. So, I tested this, and you are right that there is some difference. But it did not make it into my videos because, in the end, it does not matter. When it is a bit off center, it does not influence the strength of the connection, nor do you see it. So, just guess in between. When you make two holes, one at 38 and one at 44, you will see that it is only a small difference where the screw leaves the wood. More important is the depth of the drill bit. I would do this the way I showed in the video.
Thanks for your comment.
Hi, Dennis! What a pocket hole jig you can recommend today? (internationally available)
You can not go wrong with a kreg. I like the 720. But when your budget is limited I think the enjoywood give you more for your money
@@HookedonWood Thanks, I will go with enjoywood, it looks good for me.
Great review, i Think you should write if you are sponsored or not. Can’t find any info about that
You should because that is written at the beginning at every video. I get all these products for testing and I give my opinion about them. This is not how it started of course, but at this moment I search there site for things I think might be interesting and review them.
Testing Very thorough reviews and script writing must take you a long time. Dank u well
Actually it does😊 thanks for recognizing that😄
So glad I subscribe to this channel hello from Texas partner 👋🤠
Wel raar dat de link een goedkopere optie geeft in de browser dan wanneer deze in de eigenlijke app geopend wordt
Evengoed komt ie binnenkort in mijn schuur te liggen :-)
If anyone in the EU is interested, the reduced price is still available from the Czech warehouse this evening...
Hi Dennis, excellent again. have you considered making the platform as a box with drawers so that you can keep the drill and driver bit, etc. all together?. I did this for my Kreg and have found it very useful.
Yep, every time I made a platform actually. My Kreg has all this at the back, so I know the convenience of not heaving to search for it. Perhaps next time:-)
Yeah!
Good to see again! :-)
I would travel to netherlands, if you could tell me where to get this black mdf. Im from germany.
Schau mal beim Hornbach oder frag deinen lokalen Holzhändler. Ich habe kürzlich 19mm 2,85x2,1m beim letzteren gekauft
Dank je wel. Je reviews zijn geweldig. Als werktuigbouwer met hout als hobby, beleef ik dat een metaal / fijnmechanische man naar gereedschap voor hout kijkt. Welke houtbewerker heeft bv een haarliniaal, meetklokje en een kracht meter. Zou je een keer een filmpje kunnen maken hoe je iets op de site van Banggood besteld. Dit hebben ze mij 35 geleden niet op de MTS geleerd. Enorm bedankt voor al de energie die je hier in steekt.
Voor mij mag je ook zo'n filmpje maken .
Dennis, could you turn on Closed Captions, please?
working on it. thanks
how so die: take a shot whenever he says pocketholejig
Super 👍👍👍👍👍👍👍👍👍👍👍👍
Like the videos but I'm having such a hard time understanding what is being said.
I catch parts of but then groups of words I miss.
Good, but lacks automatic-depth drill bit and wood thickness setup. Take off another 1/2 point.... :)
Question if that feature is worth double the price? I think the Armour is great, and I even like my Kreg better. But for 69 dollars, you get a lot of pocket hole for the money. That will not mean better are not available. At least in my opinion:-)
You are right - if it doubles the price - it may not be marketable - and I realize am being picky here. My thought is that sometimes, while you are developing a product, these little extras, with minimal thought, can be added at little to no cost; but at other times - as you said - can double the price. I wonder in this case? Just my opinion...Good review - thank you.
I like the all metal design. I still use the Kreg k4.
Hoi Dennis, ik heb een zwart MDF werkblad en ik zoek nog een goede bescherming. Ik zag dat je hier Rubio olie gebruikt maar dit is een 2 componenten product. Heb je al andere oliën getest die niet met 2 componenten werken? 2 componenten vind ik lastig om te gebruiken voor kleinere werkjes. Bedankt en keep up the good work!
ik gebruik ook Danish oil, maar daar moet je 4-6 lagen op doen. Ik vind dat niet meer praktisch. Om lijmresten te verwijderen vind ik Danish oil wel beter dan Rubio. Maar Rubio werkt ook, heeft maar 1 laag nodig, al gebruik ik er twee en geeft een mooie matte uitstraling. Heel veel meer ervaring met verschillende olie heb ik niet. Ben altijd blijven hangen bij Danish en nu Rubio.
@@HookedonWood bedankt Dennis!
Where can you order this black MFT in the Netherlands? do you have a link for me? can't get that in Germany?!🙂 Thanks Kuno
I believe you can also buy it at Hornbach and Holzland In Germany according to viewers.
@@HookedonWood Thank You!
This item would cost me around €240 from ebay including P&P and import duties delivered to Ireland - I'm sure it is as good as you say it is but way over my budget....!
This really looks like a a copy of Massca M1, i wonder how they compare
More adverts?
Get video but I'm Canadian. Please call them Robertson and not square head 🤣
Anyone here had any experience with Banggood? I like the idea but see loads of bad reviews and it looks like a high scam risk. Should it be avoided?
I was skeptical as well, but then I ordered some products which were linked here.
Everything came as ordered. I don‘t know what will happen if you want to send something back or if something is broken, because so far I had no issues and no contact with customer support. *knocks on wood*
I payed with Apple Pay which worked well.
BUT I made one big mistake: I signed up with my normal email. I should have signed up with my „spam-mail“. They send you a lot of junk mails and you can‘t unsubscribe. This is the only shady thing. There is a „unsubscribe“-link in every mail, because this is a law, but the link is always broken.
Every time I clicked it, it opened my banggood app and showed me a blank page…
So in my experience if you follow the links from here and sign up with a non important mail it works just fine.
I have at least 9 items from banggood that I can remember right now. Only one came damaged (angle ruler the ones like incra with holes on every mm) very bad/light packaging, insuficient for a delicate item. T ruler 400mm (again incra style with mm hole spacing) from the same order wasn't damaged, it was delivered a couple of days after the damaged one in perfect condition.
And once I had to wait month a half for delivery but I knew that would be the case as they did say item was out of stock (45° precision machine square), they did let me order anyway which is great. That purchase contained 4 items incl that 45° square and 3 got delivered within 3 weeks one by one and there was an email update after every delivery updating me on missing item to come into stock.
So 5 stars for banggood from me, will buy again, there are several items I am eyeballing right now incl this pocket jig.
@@bluewanderer9903 @Ray Magini thanks for the feedback gents. I'll give it a go based on that 👍
I beg to disagree. @2:00. It clearly show that the sleeve bushing does not extend all the way to the exit of the angled plate. This means the drill bit will wobble like crazy.
Better immediately buy the more expensive Kreg and avoid the grief. Because in the end, you will find out it doesn't work well and end up buying the Kreg as well.
My Kreg 720 does also not go all the way to. In fact the busxhing is as long. My older Kreg did. But the new ones not anymore. It now act as a zero clearance.
@@HookedonWood I see. Mine does too.. Meaning older model. Basically the bushing needs to be as long as possible.
On the Foreman model. The bushing is slanted. Expensive though.
@@ramonching7772 , But I agree with you. At my Kreg review, I mentioned this as a sort of shortcoming, or at least a shame they leave it out. However, It makes better holes than my older Kreg and does everything right. So, I think the most important part of keeping it straight is the upper side.
For me, the prices at Banggood are no longer worth the risk. You're paying equal to or higher for items you can purchase here in the US. I just no longer see any benefit here.